PREPARATION OF ACTIVATED CARBON FROM TIRE DERIVED PYROLYTIC CHAR FOR ADSORPTION OF TETRACYCLINE HYDROCHLORIDE

Khulanuttha Chana; Sasit Soisuwan; Sarawut Sinpichai; Bing Hung Chen; Duangkamol Na-Ranong

doi:10.11113/aej.V12.18437

PREPARATION OF ACTIVATED CARBON FROM TIRE DERIVED PYROLYTIC CHAR FOR ADSORPTION OF TETRACYCLINE HYDROCHLORIDE

Khulanuttha Chana, Sasit Soisuwan, Sarawut Sinpichai, Bing Hung Chen, Duangkamol Na-Ranong

Department of Chemical Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

Effects of activation variables on performance of the obtained activated carbon (AC) were investigated for removal of tetracycline hydrochloride (TCH). Pyrolytic char derived from waste tire was chemically activated via two-step of KOH impregnation following by thermal treatment. According to regression analysis and fitting with second-degree polynomial equation, empirical models were developed to correlate performance of AC in TCH adsorption (percentage removal and adsorption capacity at equilibrium) with three activation variables: impregnation ratio (IR), activation temperature (T) and holding time of thermal treatment (t). The analysis of variance indicated that only T, T² and IR² were significant to the prediction of both percentage removal and adsorption capacity. According to the developed models, it is suggested that the pyrolytic char should be activated at IR = 6, T = 750 °C and t = 2 h to obtain the highest efficiency of TCH removal in the tested range of activation condition.

Original language	English
Pages (from-to)	59-64
Number of pages	6
Journal	ASEAN Engineering Journal
Volume	12
Issue number	4
DOIs	https://doi.org/10.11113/aej.V12.18437
Publication status	Published - 2022 Dec

All Science Journal Classification (ASJC) codes

Environmental Engineering
General Chemical Engineering
Geotechnical Engineering and Engineering Geology
Energy Engineering and Power Technology
General Engineering
Computer Science Applications

Access to Document

10.11113/aej.V12.18437

Cite this

@article{1d1d9472b990465c802a12590fbf97af,

title = "PREPARATION OF ACTIVATED CARBON FROM TIRE DERIVED PYROLYTIC CHAR FOR ADSORPTION OF TETRACYCLINE HYDROCHLORIDE",

abstract = "Effects of activation variables on performance of the obtained activated carbon (AC) were investigated for removal of tetracycline hydrochloride (TCH). Pyrolytic char derived from waste tire was chemically activated via two-step of KOH impregnation following by thermal treatment. According to regression analysis and fitting with second-degree polynomial equation, empirical models were developed to correlate performance of AC in TCH adsorption (percentage removal and adsorption capacity at equilibrium) with three activation variables: impregnation ratio (IR), activation temperature (T) and holding time of thermal treatment (t). The analysis of variance indicated that only T, T2 and IR2 were significant to the prediction of both percentage removal and adsorption capacity. According to the developed models, it is suggested that the pyrolytic char should be activated at IR = 6, T = 750 °C and t = 2 h to obtain the highest efficiency of TCH removal in the tested range of activation condition.",

author = "Khulanuttha Chana and Sasit Soisuwan and Sarawut Sinpichai and Chen, {Bing Hung} and Duangkamol Na-Ranong",

year = "2022",

month = dec,

doi = "10.11113/aej.V12.18437",

language = "English",

volume = "12",

pages = "59--64",

journal = "ASEAN Engineering Journal",

issn = "2586-9159",

publisher = "ASEAN University Network/Southeast Asia Engineering Education Development Network",

number = "4",

}

TY - JOUR

T1 - PREPARATION OF ACTIVATED CARBON FROM TIRE DERIVED PYROLYTIC CHAR FOR ADSORPTION OF TETRACYCLINE HYDROCHLORIDE

AU - Chana, Khulanuttha

AU - Soisuwan, Sasit

AU - Sinpichai, Sarawut

AU - Chen, Bing Hung

AU - Na-Ranong, Duangkamol

PY - 2022/12

Y1 - 2022/12

N2 - Effects of activation variables on performance of the obtained activated carbon (AC) were investigated for removal of tetracycline hydrochloride (TCH). Pyrolytic char derived from waste tire was chemically activated via two-step of KOH impregnation following by thermal treatment. According to regression analysis and fitting with second-degree polynomial equation, empirical models were developed to correlate performance of AC in TCH adsorption (percentage removal and adsorption capacity at equilibrium) with three activation variables: impregnation ratio (IR), activation temperature (T) and holding time of thermal treatment (t). The analysis of variance indicated that only T, T2 and IR2 were significant to the prediction of both percentage removal and adsorption capacity. According to the developed models, it is suggested that the pyrolytic char should be activated at IR = 6, T = 750 °C and t = 2 h to obtain the highest efficiency of TCH removal in the tested range of activation condition.

AB - Effects of activation variables on performance of the obtained activated carbon (AC) were investigated for removal of tetracycline hydrochloride (TCH). Pyrolytic char derived from waste tire was chemically activated via two-step of KOH impregnation following by thermal treatment. According to regression analysis and fitting with second-degree polynomial equation, empirical models were developed to correlate performance of AC in TCH adsorption (percentage removal and adsorption capacity at equilibrium) with three activation variables: impregnation ratio (IR), activation temperature (T) and holding time of thermal treatment (t). The analysis of variance indicated that only T, T2 and IR2 were significant to the prediction of both percentage removal and adsorption capacity. According to the developed models, it is suggested that the pyrolytic char should be activated at IR = 6, T = 750 °C and t = 2 h to obtain the highest efficiency of TCH removal in the tested range of activation condition.

UR - http://www.scopus.com/inward/record.url?scp=85144307038&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85144307038&partnerID=8YFLogxK

U2 - 10.11113/aej.V12.18437

DO - 10.11113/aej.V12.18437

M3 - Article

AN - SCOPUS:85144307038

SN - 2586-9159

VL - 12

SP - 59

EP - 64

JO - ASEAN Engineering Journal

JF - ASEAN Engineering Journal

IS - 4

ER -

PREPARATION OF ACTIVATED CARBON FROM TIRE DERIVED PYROLYTIC CHAR FOR ADSORPTION OF TETRACYCLINE HYDROCHLORIDE

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this