Sensitivity analysis for the junction temperature measurement of the LED 12

Yeun Ming Tzou, Wei Keng Lin, Bo Ruei Chen, Hong-Paul Wang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

LED have the special character that LED break out radiant power and heat when it is operating. Recently photo efficiency of LED is just 20% and almost residual power converts heat. But heat causes bad reliability and changes of electrical and optical character negatively. Therefore, the LED package design is the first issue for the solution of the heat problem. This study was to design a LED T-junction measurement platform which based on the required of JEDEC-51-1. The experiment results include four parts: (1) Manually retrieve V Fss voltage, the temperature raised around 3∼5°C between the chip junction temperature and LED pin; (2) Automatically retrieve V Fss voltage, the temperature raised around 30∼50°C for the same condition; (3) From trend of T J vs. time, the definition of the steady state require at least 900 sec, but we would suggest 1200 sec in this study; (4) There is no significant difference of the T J for the retrieval time 100 μs and 10μs. The important achievement of the results of this experiment can be used as a reference for T J measurement.

Original languageEnglish
Title of host publicationElectrical Power and Energy Systems
Pages425-432
Number of pages8
DOIs
Publication statusPublished - 2012 Jun 5
Event1st International Conference on Energy and Environmental Protection, ICEEP 2012 - Hohhot, China
Duration: 2012 Jun 232012 Jun 24

Publication series

NameAdvanced Materials Research
Volume516-517
ISSN (Print)1022-6680

Other

Other1st International Conference on Energy and Environmental Protection, ICEEP 2012
CountryChina
CityHohhot
Period12-06-2312-06-24

Fingerprint

Temperature measurement
Sensitivity analysis
Light emitting diodes
Heat problems
Electric potential
Temperature
Experiments
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Tzou, Y. M., Lin, W. K., Chen, B. R., & Wang, H-P. (2012). Sensitivity analysis for the junction temperature measurement of the LED 12. In Electrical Power and Energy Systems (pp. 425-432). (Advanced Materials Research; Vol. 516-517). https://doi.org/10.4028/www.scientific.net/AMR.516-517.425
Tzou, Yeun Ming ; Lin, Wei Keng ; Chen, Bo Ruei ; Wang, Hong-Paul. / Sensitivity analysis for the junction temperature measurement of the LED 12. Electrical Power and Energy Systems. 2012. pp. 425-432 (Advanced Materials Research).
@inproceedings{b92c515ae4424876aa4263a6459a66a4,
title = "Sensitivity analysis for the junction temperature measurement of the LED 12",
abstract = "LED have the special character that LED break out radiant power and heat when it is operating. Recently photo efficiency of LED is just 20{\%} and almost residual power converts heat. But heat causes bad reliability and changes of electrical and optical character negatively. Therefore, the LED package design is the first issue for the solution of the heat problem. This study was to design a LED T-junction measurement platform which based on the required of JEDEC-51-1. The experiment results include four parts: (1) Manually retrieve V Fss voltage, the temperature raised around 3∼5°C between the chip junction temperature and LED pin; (2) Automatically retrieve V Fss voltage, the temperature raised around 30∼50°C for the same condition; (3) From trend of T J vs. time, the definition of the steady state require at least 900 sec, but we would suggest 1200 sec in this study; (4) There is no significant difference of the T J for the retrieval time 100 μs and 10μs. The important achievement of the results of this experiment can be used as a reference for T J measurement.",
author = "Tzou, {Yeun Ming} and Lin, {Wei Keng} and Chen, {Bo Ruei} and Hong-Paul Wang",
year = "2012",
month = "6",
day = "5",
doi = "10.4028/www.scientific.net/AMR.516-517.425",
language = "English",
isbn = "9783037854150",
series = "Advanced Materials Research",
pages = "425--432",
booktitle = "Electrical Power and Energy Systems",

}

Tzou, YM, Lin, WK, Chen, BR & Wang, H-P 2012, Sensitivity analysis for the junction temperature measurement of the LED 12. in Electrical Power and Energy Systems. Advanced Materials Research, vol. 516-517, pp. 425-432, 1st International Conference on Energy and Environmental Protection, ICEEP 2012, Hohhot, China, 12-06-23. https://doi.org/10.4028/www.scientific.net/AMR.516-517.425

Sensitivity analysis for the junction temperature measurement of the LED 12. / Tzou, Yeun Ming; Lin, Wei Keng; Chen, Bo Ruei; Wang, Hong-Paul.

Electrical Power and Energy Systems. 2012. p. 425-432 (Advanced Materials Research; Vol. 516-517).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Sensitivity analysis for the junction temperature measurement of the LED 12

AU - Tzou, Yeun Ming

AU - Lin, Wei Keng

AU - Chen, Bo Ruei

AU - Wang, Hong-Paul

PY - 2012/6/5

Y1 - 2012/6/5

N2 - LED have the special character that LED break out radiant power and heat when it is operating. Recently photo efficiency of LED is just 20% and almost residual power converts heat. But heat causes bad reliability and changes of electrical and optical character negatively. Therefore, the LED package design is the first issue for the solution of the heat problem. This study was to design a LED T-junction measurement platform which based on the required of JEDEC-51-1. The experiment results include four parts: (1) Manually retrieve V Fss voltage, the temperature raised around 3∼5°C between the chip junction temperature and LED pin; (2) Automatically retrieve V Fss voltage, the temperature raised around 30∼50°C for the same condition; (3) From trend of T J vs. time, the definition of the steady state require at least 900 sec, but we would suggest 1200 sec in this study; (4) There is no significant difference of the T J for the retrieval time 100 μs and 10μs. The important achievement of the results of this experiment can be used as a reference for T J measurement.

AB - LED have the special character that LED break out radiant power and heat when it is operating. Recently photo efficiency of LED is just 20% and almost residual power converts heat. But heat causes bad reliability and changes of electrical and optical character negatively. Therefore, the LED package design is the first issue for the solution of the heat problem. This study was to design a LED T-junction measurement platform which based on the required of JEDEC-51-1. The experiment results include four parts: (1) Manually retrieve V Fss voltage, the temperature raised around 3∼5°C between the chip junction temperature and LED pin; (2) Automatically retrieve V Fss voltage, the temperature raised around 30∼50°C for the same condition; (3) From trend of T J vs. time, the definition of the steady state require at least 900 sec, but we would suggest 1200 sec in this study; (4) There is no significant difference of the T J for the retrieval time 100 μs and 10μs. The important achievement of the results of this experiment can be used as a reference for T J measurement.

UR - http://www.scopus.com/inward/record.url?scp=84861677393&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84861677393&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.516-517.425

DO - 10.4028/www.scientific.net/AMR.516-517.425

M3 - Conference contribution

AN - SCOPUS:84861677393

SN - 9783037854150

T3 - Advanced Materials Research

SP - 425

EP - 432

BT - Electrical Power and Energy Systems

ER -

Tzou YM, Lin WK, Chen BR, Wang H-P. Sensitivity analysis for the junction temperature measurement of the LED 12. In Electrical Power and Energy Systems. 2012. p. 425-432. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.516-517.425