Sintering of Silicon Carbide/Molybdenum Disilicide Composites Using Boron Oxide as an Additive

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Sintering of silicon carbide reinforced molybdenum disilicide‐Composites using boron oxide as an additive was performed. The addition of boron oxide to the composites was found to be beneficial. It reduced the processing temperature, resulted in smaller grain sizes, and increased the flexural strength of the composites. Formation of glassy boundary phase was also found.

Original languageEnglish
Pages (from-to)2751-2752
Number of pages2
JournalJournal of the American Ceramic Society
Volume77
Issue number10
DOIs
Publication statusPublished - 1994 Oct

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry

Cite this