Striking panel touch location detect

Chin Yu Wang, Hon Ta Liu, Shih-Yu Shen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Recently, there are more touch panels that have been extensively used throughout the world. Due to customer input regarding improvements, we have examined the use of technology of touch products. In the market, most of touch monitors used by finger or touch pen get the electricity, capacity effect, or stop sensor signal. From the signal orientates the controller, lots of products were used by ATM machine, counter, automatic monitor, and 3C roducts, to communicate between human people and computer equipment. On the other hand, they also belong to interactive game platform of imitating sport. For example, those places of striking imitation, pitching, golfing, interactive movie, playing piano, percussion imitation. They all have this kind of striking action, distinguish from signal. It's very important to do research of building up a sensor and deal with signal of both software and hardware platforms. The paper discusses about making a vibration sensor from the PVDF piezoelectricity film. To stick the vibration sensor on the four corners of glass board in long 50 cm, wide 50 cm and think 0.5 cm sudoku. During the board striking get the signal, link with oscilloscope and computer. By operating the computer, save the information in computer when the oscilloscope got the data. Finally, using the software of visual C++ to calculate and analysis, and from the tree structural algorithm method to speed up and improve the accuracy. These conclusions can improve that the ninety six percent of the accuracy can occur when the sensor is in the best condition.

Original languageEnglish
Title of host publicationProceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012
Pages397-400
Number of pages4
DOIs
Publication statusPublished - 2012 Jul 30
Event2012 International Symposium on Computer, Consumer and Control, IS3C 2012 - Taichung, Taiwan
Duration: 2012 Jun 42012 Jun 6

Publication series

NameProceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012

Other

Other2012 International Symposium on Computer, Consumer and Control, IS3C 2012
CountryTaiwan
CityTaichung
Period12-06-0412-06-06

Fingerprint

Sensors
Piezoelectricity
Automatic teller machines
Sports
Electricity
Hardware
Glass
Controllers

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications

Cite this

Wang, C. Y., Liu, H. T., & Shen, S-Y. (2012). Striking panel touch location detect. In Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012 (pp. 397-400). [6228330] (Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012). https://doi.org/10.1109/IS3C.2012.107
Wang, Chin Yu ; Liu, Hon Ta ; Shen, Shih-Yu. / Striking panel touch location detect. Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012. 2012. pp. 397-400 (Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012).
@inproceedings{5db2cbeb36df4b25a9d584bb025cc3e4,
title = "Striking panel touch location detect",
abstract = "Recently, there are more touch panels that have been extensively used throughout the world. Due to customer input regarding improvements, we have examined the use of technology of touch products. In the market, most of touch monitors used by finger or touch pen get the electricity, capacity effect, or stop sensor signal. From the signal orientates the controller, lots of products were used by ATM machine, counter, automatic monitor, and 3C roducts, to communicate between human people and computer equipment. On the other hand, they also belong to interactive game platform of imitating sport. For example, those places of striking imitation, pitching, golfing, interactive movie, playing piano, percussion imitation. They all have this kind of striking action, distinguish from signal. It's very important to do research of building up a sensor and deal with signal of both software and hardware platforms. The paper discusses about making a vibration sensor from the PVDF piezoelectricity film. To stick the vibration sensor on the four corners of glass board in long 50 cm, wide 50 cm and think 0.5 cm sudoku. During the board striking get the signal, link with oscilloscope and computer. By operating the computer, save the information in computer when the oscilloscope got the data. Finally, using the software of visual C++ to calculate and analysis, and from the tree structural algorithm method to speed up and improve the accuracy. These conclusions can improve that the ninety six percent of the accuracy can occur when the sensor is in the best condition.",
author = "Wang, {Chin Yu} and Liu, {Hon Ta} and Shih-Yu Shen",
year = "2012",
month = "7",
day = "30",
doi = "10.1109/IS3C.2012.107",
language = "English",
isbn = "9780769546551",
series = "Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012",
pages = "397--400",
booktitle = "Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012",

}

Wang, CY, Liu, HT & Shen, S-Y 2012, Striking panel touch location detect. in Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012., 6228330, Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, pp. 397-400, 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, Taichung, Taiwan, 12-06-04. https://doi.org/10.1109/IS3C.2012.107

Striking panel touch location detect. / Wang, Chin Yu; Liu, Hon Ta; Shen, Shih-Yu.

Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012. 2012. p. 397-400 6228330 (Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Striking panel touch location detect

AU - Wang, Chin Yu

AU - Liu, Hon Ta

AU - Shen, Shih-Yu

PY - 2012/7/30

Y1 - 2012/7/30

N2 - Recently, there are more touch panels that have been extensively used throughout the world. Due to customer input regarding improvements, we have examined the use of technology of touch products. In the market, most of touch monitors used by finger or touch pen get the electricity, capacity effect, or stop sensor signal. From the signal orientates the controller, lots of products were used by ATM machine, counter, automatic monitor, and 3C roducts, to communicate between human people and computer equipment. On the other hand, they also belong to interactive game platform of imitating sport. For example, those places of striking imitation, pitching, golfing, interactive movie, playing piano, percussion imitation. They all have this kind of striking action, distinguish from signal. It's very important to do research of building up a sensor and deal with signal of both software and hardware platforms. The paper discusses about making a vibration sensor from the PVDF piezoelectricity film. To stick the vibration sensor on the four corners of glass board in long 50 cm, wide 50 cm and think 0.5 cm sudoku. During the board striking get the signal, link with oscilloscope and computer. By operating the computer, save the information in computer when the oscilloscope got the data. Finally, using the software of visual C++ to calculate and analysis, and from the tree structural algorithm method to speed up and improve the accuracy. These conclusions can improve that the ninety six percent of the accuracy can occur when the sensor is in the best condition.

AB - Recently, there are more touch panels that have been extensively used throughout the world. Due to customer input regarding improvements, we have examined the use of technology of touch products. In the market, most of touch monitors used by finger or touch pen get the electricity, capacity effect, or stop sensor signal. From the signal orientates the controller, lots of products were used by ATM machine, counter, automatic monitor, and 3C roducts, to communicate between human people and computer equipment. On the other hand, they also belong to interactive game platform of imitating sport. For example, those places of striking imitation, pitching, golfing, interactive movie, playing piano, percussion imitation. They all have this kind of striking action, distinguish from signal. It's very important to do research of building up a sensor and deal with signal of both software and hardware platforms. The paper discusses about making a vibration sensor from the PVDF piezoelectricity film. To stick the vibration sensor on the four corners of glass board in long 50 cm, wide 50 cm and think 0.5 cm sudoku. During the board striking get the signal, link with oscilloscope and computer. By operating the computer, save the information in computer when the oscilloscope got the data. Finally, using the software of visual C++ to calculate and analysis, and from the tree structural algorithm method to speed up and improve the accuracy. These conclusions can improve that the ninety six percent of the accuracy can occur when the sensor is in the best condition.

UR - http://www.scopus.com/inward/record.url?scp=84864250718&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864250718&partnerID=8YFLogxK

U2 - 10.1109/IS3C.2012.107

DO - 10.1109/IS3C.2012.107

M3 - Conference contribution

SN - 9780769546551

T3 - Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012

SP - 397

EP - 400

BT - Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012

ER -

Wang CY, Liu HT, Shen S-Y. Striking panel touch location detect. In Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012. 2012. p. 397-400. 6228330. (Proceedings - 2012 International Symposium on Computer, Consumer and Control, IS3C 2012). https://doi.org/10.1109/IS3C.2012.107