Study and implementation of the single-phase three-wire photovoltaic energy conversion system

Jiann Fuh Chen; Luy Yin Chiang; Ching Lung Chu; Yong Lung Lee; Tsorng Juu Liang

Study and implementation of the single-phase three-wire photovoltaic energy conversion system

Jiann Fuh Chen, Luy Yin Chiang, Ching Lung Chu, Yong Lung Lee, Tsorng Juu Liang

Department of Electrical Engineering

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

Abstract

A single-stage single-phase three-wire (1φ3W) photovoltaic energy conversion system connected with utility power system was presented in this paper. The DC power generated by the solar cells was converted into AC power by a 1φ3w inverter with an auxiliary LC filter and was fed directly to the utility line. Since the output characteristics of the solar cells were highly affected by the environment and lumen of sun, the PV energy conversion system was adapted to track the maximum power operation point. The size and weight of PV conversion system can be largely reduced without energy storage devices, dc to dc converter, and center-tapped transformer. Finally, a 1 kW experimental prototype was built to demonstrate the performance of the proposed technique.

Original language	English
Pages	692-695
Number of pages	4
Publication status	Published - 1999
Event	Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99) - Kowloon, Hong Kong Duration: 1999 Jul 27 → 1999 Jul 29

Other

Other	Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99)
City	Kowloon, Hong Kong
Period	99-07-27 → 99-07-29

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Cite this

@conference{f2f6a2f659d4409f8a1874adbd5f00f5,

title = "Study and implementation of the single-phase three-wire photovoltaic energy conversion system",

abstract = "A single-stage single-phase three-wire (1φ3W) photovoltaic energy conversion system connected with utility power system was presented in this paper. The DC power generated by the solar cells was converted into AC power by a 1φ3w inverter with an auxiliary LC filter and was fed directly to the utility line. Since the output characteristics of the solar cells were highly affected by the environment and lumen of sun, the PV energy conversion system was adapted to track the maximum power operation point. The size and weight of PV conversion system can be largely reduced without energy storage devices, dc to dc converter, and center-tapped transformer. Finally, a 1 kW experimental prototype was built to demonstrate the performance of the proposed technique.",

author = "Chen, {Jiann Fuh} and Chiang, {Luy Yin} and Chu, {Ching Lung} and Lee, {Yong Lung} and Liang, {Tsorng Juu}",

year = "1999",

language = "English",

pages = "692--695",

note = "Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99) ; Conference date: 27-07-1999 Through 29-07-1999",

}

Study and implementation of the single-phase three-wire photovoltaic energy conversion system. / Chen, Jiann Fuh; Chiang, Luy Yin; Chu, Ching Lung et al.

1999. 692-695 Paper presented at Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99), Kowloon, Hong Kong.

Research output: Contribution to conference › Paper › peer-review

TY - CONF

T1 - Study and implementation of the single-phase three-wire photovoltaic energy conversion system

AU - Chen, Jiann Fuh

AU - Chiang, Luy Yin

AU - Chu, Ching Lung

AU - Lee, Yong Lung

AU - Liang, Tsorng Juu

PY - 1999

Y1 - 1999

N2 - A single-stage single-phase three-wire (1φ3W) photovoltaic energy conversion system connected with utility power system was presented in this paper. The DC power generated by the solar cells was converted into AC power by a 1φ3w inverter with an auxiliary LC filter and was fed directly to the utility line. Since the output characteristics of the solar cells were highly affected by the environment and lumen of sun, the PV energy conversion system was adapted to track the maximum power operation point. The size and weight of PV conversion system can be largely reduced without energy storage devices, dc to dc converter, and center-tapped transformer. Finally, a 1 kW experimental prototype was built to demonstrate the performance of the proposed technique.

AB - A single-stage single-phase three-wire (1φ3W) photovoltaic energy conversion system connected with utility power system was presented in this paper. The DC power generated by the solar cells was converted into AC power by a 1φ3w inverter with an auxiliary LC filter and was fed directly to the utility line. Since the output characteristics of the solar cells were highly affected by the environment and lumen of sun, the PV energy conversion system was adapted to track the maximum power operation point. The size and weight of PV conversion system can be largely reduced without energy storage devices, dc to dc converter, and center-tapped transformer. Finally, a 1 kW experimental prototype was built to demonstrate the performance of the proposed technique.

UR - http://www.scopus.com/inward/record.url?scp=0033309277&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033309277&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0033309277

SP - 692

EP - 695

T2 - Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99)

Y2 - 27 July 1999 through 29 July 1999

ER -

Study and implementation of the single-phase three-wire photovoltaic energy conversion system

Abstract

Other

All Science Journal Classification (ASJC) codes

UN SDGs

Other files and links

Fingerprint

Cite this