Study on incineration technology of oil gas generated during the recovery process of oil spill

Shuhn Shyurng Hou, Yung Chang Ko, Ta-Hui Lin

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area.

Original languageEnglish
Pages (from-to)1662-1668
Number of pages7
JournalEnergy Conversion and Management
Volume52
Issue number3
DOIs
Publication statusPublished - 2011 Mar 1

Fingerprint

Incineration
Refuse incinerators
Oil spills
Gas oils
Recovery
Fuel burners
Oil burners
Gas burners
Flue gases
Air
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Nuclear Energy and Engineering
  • Fuel Technology
  • Energy Engineering and Power Technology

Cite this

@article{4be40d2ce70443faa38ed00bdb2f668c,
title = "Study on incineration technology of oil gas generated during the recovery process of oil spill",
abstract = "The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area.",
author = "Hou, {Shuhn Shyurng} and Ko, {Yung Chang} and Ta-Hui Lin",
year = "2011",
month = "3",
day = "1",
doi = "10.1016/j.enconman.2010.10.029",
language = "English",
volume = "52",
pages = "1662--1668",
journal = "Energy Conversion and Management",
issn = "0196-8904",
publisher = "Elsevier Limited",
number = "3",

}

Study on incineration technology of oil gas generated during the recovery process of oil spill. / Hou, Shuhn Shyurng; Ko, Yung Chang; Lin, Ta-Hui.

In: Energy Conversion and Management, Vol. 52, No. 3, 01.03.2011, p. 1662-1668.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Study on incineration technology of oil gas generated during the recovery process of oil spill

AU - Hou, Shuhn Shyurng

AU - Ko, Yung Chang

AU - Lin, Ta-Hui

PY - 2011/3/1

Y1 - 2011/3/1

N2 - The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area.

AB - The objective of this study is to design, set up and operate an incinerator system capable of providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in Taiwan. In this study, we successfully develop a vertical-type incinerator, which consists of five oil gas burners with entrained primary air, a pilot burner, and an auxiliary burner. The incinerator system is equipped with necessary control units in order to achieve safe, easy, fast, and efficient operation. Flame appearance, flue gas temperature and CO emission of the incinerator system for burning oil gas are reported and discussed. Under the long-term operation, it is found that the new designed incinerator is satisfactory for burning oil gas with low supply pressure at various compositions and supply rates during the recovery process of oil spill. It is noteworthy that the results obtained herein are of great significance to provide a good guidance for those who need to design, set up and operate an incinerator system providing clean exhaust and safety control for burning oil gas generated during the recovery process of oil spill in a polluted site with a large area.

UR - http://www.scopus.com/inward/record.url?scp=78650518174&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78650518174&partnerID=8YFLogxK

U2 - 10.1016/j.enconman.2010.10.029

DO - 10.1016/j.enconman.2010.10.029

M3 - Article

VL - 52

SP - 1662

EP - 1668

JO - Energy Conversion and Management

JF - Energy Conversion and Management

SN - 0196-8904

IS - 3

ER -