Study on shear behavior of interbedded sandstone and mudstone slope using ring shear test

Cheng Me Liao, Hung Ming Lin, Der Her Lee, Po Ying Chen, Jyh Jong Liao

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

As slopes in the interbedded sandstone and mudstone formation are geologically characterized by proneness to landslides, past elaborations on the failure mechanism of such slopes were mostly confined to the fact that slope slides often occur after rainfalls when rainwater permeates through sandstone formation. Due to sharp difference in water permeability between sandstone and mudstone, the groundwater will accumulate on the interface of the interbedded formation, resulting in increased pore water pressures and reduced safety coefficients. In the process of slides with large displacement, however, change of mechanical properties on the sliding surface is a major factor that affects slope slides. For this purpose, the study aims to develop a ring shear test apparatus that can be applicable to weak rock materials to obtain their residual strength values under the condition of large displacement. The results show that ring shear tests are more effective in obtaining the actual residual strength of weak rock materials and complete post peak shear behaviors than direct shear tests. The results of this study also demonstrate that abrasion between grains of rock materials still continues till their residual strength values reach a stable condition, even though these rock materials are affected by the action of shear strength, and that the content of fine grained materials increases with the normal force in the shear zone.

Original languageEnglish
Title of host publicationProceedings of The Seventeenth 2007 International Offshore and Polar Engineering Conference, ISOPE 2007
Pages1601-1606
Number of pages6
Publication statusPublished - 2007 Dec 3
Event17th 2007 International Offshore and Polar Engineering Conference, ISOPE 2007 - Lisbon, Portugal
Duration: 2007 Jul 12007 Jul 6

Publication series

NameProceedings of the International Offshore and Polar Engineering Conference
ISSN (Print)1098-6189
ISSN (Electronic)1555-1792

Other

Other17th 2007 International Offshore and Polar Engineering Conference, ISOPE 2007
CountryPortugal
CityLisbon
Period07-07-0107-07-06

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Ocean Engineering
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Study on shear behavior of interbedded sandstone and mudstone slope using ring shear test'. Together they form a unique fingerprint.

Cite this