Tantalum oxide film prepared by reactive magnetron sputtering deposition for all-solid-state electrochromic device

Inorganic-solid-state electrolyte tantalum oxide thin films were deposited by reactive DC magnetron sputtering to improve the leakage and deterioration of traditional liquid electrolytes in electrochromic devices. O₂ at 1-20 sccm flow rates was used to deposit the tantalum oxide films with various compositions and microstructures. The results indicate that the tantalum oxide thin films were amorphous, near-stoichiometric, porous with a loose fibrous structure, and highly transparent. The maximum charge capacity was obtained at an oxygen flow rate of 3 sccm and 50 W. The transmission change of the Ta ₂O₅ film deposited on a WO₃/ITO/glass substrate between colored and bleached states at a wavelength of 550 nm was 56.7%. The all-solid-state electrochromic device was fabricated as a multilayer structure of glass/ITO/WO₃/Ta₂O₅/NiO_x/ITO/ glass. The optical transmittance difference of the device increased with increasing applied voltage. The maximum change was 66.5% at an applied voltage of ± 5 V.