TY - JOUR
T1 - Tension lap splices in UHPC beams
T2 - Influence of rebar size, steel fibers, splice length, and coarse aggregate
AU - Hung, Chung Chan
AU - Yuen, Terry YP
AU - Huang, Chih Wei
AU - Yen, Cheng Hao
N1 - Funding Information:
This study was sponsored in part by the Ministry of Science and Technology, Taiwan , under Grant No. 109-2636-E-006-015 . The opinions, findings, and conclusions expressed in this paper are those of the authors, and do not necessarily reflect those of the sponsor.
Publisher Copyright:
© 2022 Elsevier Ltd
PY - 2022/9/1
Y1 - 2022/9/1
N2 - Ultra-high performance concrete (UHPC) is a special type of fiber-reinforced cementitious composites and has been considered an effective solution to reduce the required development length for steel reinforcing bars due to its high bond strength. This study thoroughly investigated the bond strength of deformed steel bars in UHPC using four-point loading tests on sixteen large-scale lap splice UHPC beams. The experimental variables included the bar diameter, macro-steel fibers, splice length, and coarse aggregate. The splice strength of reinforcing bars was estimated using the proposed analytical model and strain gauge measurements. The results showed that the effects of spacing and sizes of reinforcing bars on the splice strength were obvious. The inclusion of coarse aggregate considerably enhanced the splice strength of reinforcing bars in UHPC. The fracture toughening effects by fibers and coarse aggregate can enhance the strain field uniformity in the lap spice zone and increase the bond strength. In addition to the experimental study, the applicability of several prevailing bond strength models for examining the splice strength of reinforcing bars in UHPC was evaluated. Based on the evaluation results, a suitable model that was able to predict the splice strengths of the tested beams with reasonable accuracy was suggested.
AB - Ultra-high performance concrete (UHPC) is a special type of fiber-reinforced cementitious composites and has been considered an effective solution to reduce the required development length for steel reinforcing bars due to its high bond strength. This study thoroughly investigated the bond strength of deformed steel bars in UHPC using four-point loading tests on sixteen large-scale lap splice UHPC beams. The experimental variables included the bar diameter, macro-steel fibers, splice length, and coarse aggregate. The splice strength of reinforcing bars was estimated using the proposed analytical model and strain gauge measurements. The results showed that the effects of spacing and sizes of reinforcing bars on the splice strength were obvious. The inclusion of coarse aggregate considerably enhanced the splice strength of reinforcing bars in UHPC. The fracture toughening effects by fibers and coarse aggregate can enhance the strain field uniformity in the lap spice zone and increase the bond strength. In addition to the experimental study, the applicability of several prevailing bond strength models for examining the splice strength of reinforcing bars in UHPC was evaluated. Based on the evaluation results, a suitable model that was able to predict the splice strengths of the tested beams with reasonable accuracy was suggested.
UR - http://www.scopus.com/inward/record.url?scp=85131405032&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85131405032&partnerID=8YFLogxK
U2 - 10.1016/j.jobe.2022.104716
DO - 10.1016/j.jobe.2022.104716
M3 - Article
AN - SCOPUS:85131405032
VL - 55
JO - Journal of Building Engineering
JF - Journal of Building Engineering
SN - 2352-7102
M1 - 104716
ER -