The implementation method of data sharing based on ship production modeling

W. Tann, H. J. Shaw

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Within a shipyard, designer have their own design objectives and moreover apply different software on heterogeneous hardware platforms; nevertheless requested collaborative operation still remains in the complex design circumstance. CAD syatems are used on a higher level of design stages in each section, and these approved designs are usually delivered as paper drawings. For duration of the design. 3D models, referred to 2D AutoCAD drawings from the functional design stage, are constructed as the pre-processor model of finite element analyses. and reconstructed manually into the Tribon system for practical production; this kind of process takes much time and cost consumption. In order to overcome the drawbacks, by utilizing earlier 2D drawings over the structural design phase to streamline the design enables not only to reduce thr proportion of 2D drawings over the structural design phase to streamline the design processes, but also to offer the consistent product model data for different stages' utilization, avoiding repetitious works to modelling.

Original languageEnglish
Pages (from-to)9-17
Number of pages9
JournalJournal of Taiwan Society of Naval Architects and Marine Engineers
Volume26
Issue number1
Publication statusPublished - 2007 Feb 1

Fingerprint

Ships
Structural design
Shipyards
Computer aided design
Hardware
Costs

All Science Journal Classification (ASJC) codes

  • Ocean Engineering
  • Mechanical Engineering

Cite this

@article{faf9990f10e0428c95637695bf7615b9,
title = "The implementation method of data sharing based on ship production modeling",
abstract = "Within a shipyard, designer have their own design objectives and moreover apply different software on heterogeneous hardware platforms; nevertheless requested collaborative operation still remains in the complex design circumstance. CAD syatems are used on a higher level of design stages in each section, and these approved designs are usually delivered as paper drawings. For duration of the design. 3D models, referred to 2D AutoCAD drawings from the functional design stage, are constructed as the pre-processor model of finite element analyses. and reconstructed manually into the Tribon system for practical production; this kind of process takes much time and cost consumption. In order to overcome the drawbacks, by utilizing earlier 2D drawings over the structural design phase to streamline the design enables not only to reduce thr proportion of 2D drawings over the structural design phase to streamline the design processes, but also to offer the consistent product model data for different stages' utilization, avoiding repetitious works to modelling.",
author = "W. Tann and Shaw, {H. J.}",
year = "2007",
month = "2",
day = "1",
language = "English",
volume = "26",
pages = "9--17",
journal = "Journal of Taiwan Society of Naval Architects and Marine Engineers",
issn = "1023-4535",
publisher = "Taiwan Society of Naval Architects and Marine Engineers",
number = "1",

}

The implementation method of data sharing based on ship production modeling. / Tann, W.; Shaw, H. J.

In: Journal of Taiwan Society of Naval Architects and Marine Engineers, Vol. 26, No. 1, 01.02.2007, p. 9-17.

Research output: Contribution to journalArticle

TY - JOUR

T1 - The implementation method of data sharing based on ship production modeling

AU - Tann, W.

AU - Shaw, H. J.

PY - 2007/2/1

Y1 - 2007/2/1

N2 - Within a shipyard, designer have their own design objectives and moreover apply different software on heterogeneous hardware platforms; nevertheless requested collaborative operation still remains in the complex design circumstance. CAD syatems are used on a higher level of design stages in each section, and these approved designs are usually delivered as paper drawings. For duration of the design. 3D models, referred to 2D AutoCAD drawings from the functional design stage, are constructed as the pre-processor model of finite element analyses. and reconstructed manually into the Tribon system for practical production; this kind of process takes much time and cost consumption. In order to overcome the drawbacks, by utilizing earlier 2D drawings over the structural design phase to streamline the design enables not only to reduce thr proportion of 2D drawings over the structural design phase to streamline the design processes, but also to offer the consistent product model data for different stages' utilization, avoiding repetitious works to modelling.

AB - Within a shipyard, designer have their own design objectives and moreover apply different software on heterogeneous hardware platforms; nevertheless requested collaborative operation still remains in the complex design circumstance. CAD syatems are used on a higher level of design stages in each section, and these approved designs are usually delivered as paper drawings. For duration of the design. 3D models, referred to 2D AutoCAD drawings from the functional design stage, are constructed as the pre-processor model of finite element analyses. and reconstructed manually into the Tribon system for practical production; this kind of process takes much time and cost consumption. In order to overcome the drawbacks, by utilizing earlier 2D drawings over the structural design phase to streamline the design enables not only to reduce thr proportion of 2D drawings over the structural design phase to streamline the design processes, but also to offer the consistent product model data for different stages' utilization, avoiding repetitious works to modelling.

UR - http://www.scopus.com/inward/record.url?scp=33947530719&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33947530719&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:33947530719

VL - 26

SP - 9

EP - 17

JO - Journal of Taiwan Society of Naval Architects and Marine Engineers

JF - Journal of Taiwan Society of Naval Architects and Marine Engineers

SN - 1023-4535

IS - 1

ER -