Thermal effect on the linear and nonlinear analysis of cross-ply laminated plates

Sen-Yung Lee, Jeng Jong Ou

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The cylindrical bending of cross ply laminated plates subjected to an uniform transverse load is evaluated via classical plate theory and Von Karman's larger deflection plate theory, respectively. It is shown the influence of the temperature variation, boundary conditions, span to thickness ratio and stacking sequence on the accuracy of the linear analysis is quite significant. The linear laminated plate theory may not be adequate for the analysis of several cross ply laminated plates even in small deflection range and at room temperature.

Original languageEnglish
Title of host publicationProceedings of the International Conference on Advanced Composite Materials
EditorsT. Chandra, A.K. Dhingra
PublisherPubl by Minerals, Metals & Materials Soc (TMS)
Pages307-313
Number of pages7
ISBN (Print)0873392515
Publication statusPublished - 1993 Dec 1
EventProceedings of the International Conference on Advanced Composite Materials - Wollongong, Aust
Duration: 1993 Feb 151993 Feb 19

Publication series

NameProceedings of the International Conference on Advanced Composite Materials

Other

OtherProceedings of the International Conference on Advanced Composite Materials
CityWollongong, Aust
Period93-02-1593-02-19

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Thermal effect on the linear and nonlinear analysis of cross-ply laminated plates'. Together they form a unique fingerprint.

  • Cite this

    Lee, S-Y., & Ou, J. J. (1993). Thermal effect on the linear and nonlinear analysis of cross-ply laminated plates. In T. Chandra, & A. K. Dhingra (Eds.), Proceedings of the International Conference on Advanced Composite Materials (pp. 307-313). (Proceedings of the International Conference on Advanced Composite Materials). Publ by Minerals, Metals & Materials Soc (TMS).