Thermomechanical simulation of a radial forging process

A. A. Tseng, S. X. Tong, T. C. Chen, J. Hashemi

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

The thermomechanical behaviour of a radial forging process has been investigated. The slab method was applied to study the mechanics of the process. A one-dimensional heat-transfer equation was used to predict the axial temperature distribution of the workpiece. The analysis has been computerized by taking into account the effects of strain, strain rate and temperature on the flow stress of the material being forged. A contact factor is formulated to consider the actual area of contact between the hammer dies and workpiece. An electrical analogy scheme has been developed to determine the thermal contact resistance which is needed in thermal study. The radial pressure, forging force, forging power and axial workpiece temperature were predicted for selected operating conditions. The model predictions were compared to the on-line measurement data. The comparison indicates that the computer model used in this study is sufficiently accurate for practical purposes.

Original languageEnglish
Pages (from-to)87-98
Number of pages12
JournalMaterials and Design
Volume15
Issue number2
DOIs
Publication statusPublished - 1994

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Thermomechanical simulation of a radial forging process'. Together they form a unique fingerprint.

Cite this