Two dimensional thermal-hydraulic analysis for a packed bed regenerator used in a reheating furnace

Chien Nan Lin, Jiin Yuh Jang, Yi Shiun Lai

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Packed bed is widely used for different industries and technologies, such as heat exchangers, heat recovery, thermal energy storage and chemical reactors. In modern steel industry, packed bed regenerator is widely utilized in the reheating furnace to increase the furnace efficiency. This study established a two dimensional numerical model to simulate a packed bed used in regenerative furnaces. The physical properties of fluids and packed stuffing (such as density, thermal conductivity, and specific heat) are considered as functions of temperature to adapt the large temperature variation in operation. The transient temperature profiles of the flue gas, packed bed, and air during the heating and regeneration period are examined for various switching time (30, 60, 120, and 240 s). The results reveal that, during the heating period, the spanwise averaged heat transfer coefficient is decreased along the longitudinal downstream direction, while during the regeneration period, the opposite trend is true. Moreover, the regenerator thermal effectiveness is decreased by increasing the switching time.

Original languageEnglish
Article number995
JournalEnergies
Volume9
Issue number12
DOIs
Publication statusPublished - 2016 Dec

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Energy (miscellaneous)
  • Control and Optimization
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Two dimensional thermal-hydraulic analysis for a packed bed regenerator used in a reheating furnace'. Together they form a unique fingerprint.

Cite this