機械工程學系

研究成果 1978 2020

篩選
Paper
2019
Detonation
detonation
equivalence
flames
Ethylene
Thermoplastics
Mechanical properties
Microstructure
Fibers
Tensile strength

Micro-explosion of emulsified fuel droplet and its combustion characteristics in a boiler

Hsuan, C. Y., Hou, S. S., Wang, Y. L. & Lin, T-H., 2019 一月 1.

研究成果: Paper

Fuel Oils
fuel oils
Residual fuels
boilers
Fuel oils

Properties and electrolytic decomposition characteristics of han aqueous solutions

Yang, H. O., You, C. W., Chin, J. K. & Wu, M-H., 2019 一月 1.

研究成果: Paper

aqueous solutions
Decomposition
decomposition
conductivity
electrolysis
sewage
sludge
gasification
Steam
Sewage sludge

Study of the effect of process parameters on fiber length, fiber orientation and tensile strength of long glass fiber reinforced polypropylene molding

Huang, P. W., Peng, H. S., Hwang, S. J., Huang, C. T., Chen, P. C., Ke, Y. Y., Pan, P. S., Wu, C. C. & Tu, C. I., 2019 一月 1.

研究成果: Paper

Polypropylenes
Fiber reinforced materials
Molding
Glass fibers
Tensile strength

Two successive drops impinging onto a hydrophobic plate

Chen, C. K., Verma, D. & Lin, T. H., 2019 一月 1.

研究成果: Paper

impingement
falling
solid surfaces
intervals
Water
2018

Development of vehicle collision avoidance system based on impedance control approach

Chen, C. L., Tsai, M. C., Wang, K. L., Hu, J. S. & Liu, Y. C., 2018 一月 1.

研究成果: Paper

Collision avoidance
Braking
Feedback
Hardware
Testing
Glass fibers
Tensile strength
Fibers
Composite materials
Processing

Geometrical effects on fiber micro-structure variations and the influences on long Fiber Reinforced Thermoplastics (FRT) parts

Huang, C. T., Hsu, C., Chen, Y. S., Hwang, S. J., Peng, H. S., Wu, C. C. & Tu, C. I., 2018 一月 1.

研究成果: Paper

Thermoplastics
Microstructure
Fibers
Plastics
Fiber reinforced materials
2017

Analysis and validations of optical image stabilization actuator for cellphone camera modules

Hsieh, C. L., Wang, H. Y., Chang, Y. H. & Liu, C. S., 2017 一月 1.

研究成果: Paper

modules
stabilization
actuators
cameras
launching

Combustion behavior of partial substitution of solid fossil fuel by biomass

Hou, S. S., Huang, W. C. & Lin, T. H., 2017 一月 1.

研究成果: Paper

fossil fuels
Coal
biomass
Fossil fuels
coal
1 引文 (Scopus)

Experimental study on velocity deficits of near-limit detonation waves initiated in narrow channels

Xiong, Y., Chan, H. P., Wu, M. H., Qin, J. & Chen, C. F., 2017 一月 1.

研究成果: Paper

detonation waves
Detonation
detonation
deflagration
equivalence

Thermogravimetric analysis of sludge pyrolysis oil mixed with heavy fuel oil

Chatelier, S., Kuan, Y. H., Chen, G. B., Lin, H. T. & Lin, T. H., 2017 一月 1.

研究成果: Paper

Fuel Oils
fuel oils
Residual fuels
sludge
Fuel oils

The study of fire resistance of building integrated photovoltaics

Yang, M. T., Liou, Y. L., Chen, C. K., Lee, H. K., Lin, T. H., Tsai, C. F., Lei, M. Y. & Wang, T. C., 2017 一月 1.

研究成果: Paper

flammability
Fire resistance
Fires
modules
Calcium Sulfate
2015
Copper
Wire

Augmented reality in peg-in-hole microassembly operations

Chang, R-J. & Jau, J. C., 2015 十月 18.

研究成果: Paper

Augmented reality
Virtual reality
Computer aided design
Methane
Carbon
Acoustics
ethylene
2014
Nusselt number
Heat transfer
Water
2013
Combustion synthesis
Liquid fuels
Nanostructures
Carbon
Oxygen

Design a free-space fiber coil gyroscope using Mueller matrix

Lo, Y. L., Yen, C. C., Chung, Y. F., Lin, H. H. & Liu, R. Y., 2013 五月 27, p. 105-107. 3 p.

研究成果: Paper

Gyroscopes
Fibers
Polarization
Fiber optics

Laser cleaning of carbonaceous deposits on combustion engine components

Guan, Y., Liu, C-H., Lim, G. C., Hong, M. & Zheng, H., 2013 十二月 1, p. 436-442. 7 p.

研究成果: Paper

Cleaning
Deposits
Engines
Lasers
Steel
Straw
Furnaces
Coal
Flow simulation
Chemical analysis
Phase change materials
Facades
Temperature control
Melting point
Aspect ratio
Nanocapsules
Suspensions
Water
Heat sinks
Urea formaldehyde resins
Detonation
Visualization
Surges (fluid)
Explosions
Ethylene
2012
1 引文 (Scopus)
Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Pressure distribution
Compaction
Fuel cells
2011

Analyzing thermo-electro-mechanical response of active composites

Lin, C. & Muliana, A., 2011 十二月 1.

研究成果: Paper

Composite materials
Micromechanics
Ferroelectric materials
Boundary conditions
Temperature
2009
water injection
spark ignition
gasoline
Water injection
Nitric oxide
deflagration
Detonation
detonation
flames
Oxygen

Impingement of a gas-in-liquid compound drop on a heated flat plate

Chang, K. N., Chen, R. H., Pu, J. Y. & Lin, T-H., 2009 一月 1.

研究成果: Paper

impingement
flat plates
Gases
Liquids
liquids

Modeling of variance for machine tool positioning errors

Liao, Y. Y., Wang, J. J., Hsu, F. C., Lyu, Y. T. & Melkote, S. N., 2009 十二月 1, p. 309-312. 4 p.

研究成果: Paper

Machine tools
Lasers
Measurement errors
Kinematics

One-dimensional completely-prevaporized compound-drops spray flames

Hsuan, C. Y., Hou, S. S. & Lin, T-H., 2009 一月 1.

研究成果: Paper

sprayers
flames
Heat losses
Water
heat
47 引文 (Scopus)

Reconfiguration principles and strategies for reconfigurable mechanisms

Kuo, C. H., Dai, J. S. & Yan, H-S., 2009 十一月 12, p. 1-7. 7 p.

研究成果: Paper

Topology
14 引文 (Scopus)

Structural analysis and configuration synthesis of mechanisms with variable topologies

Yan, H-S. & Kuo, C. H., 2009 十一月 12, p. 23-31. 9 p.

研究成果: Paper

Structural analysis
Kinematics
Topology

The effect of inert dilution on flickering motions of jet diffusion flames

Hu, C. W., Chen, C. H., Hou, S. S. & Lin, T-H., 2009 一月 1.

研究成果: Paper

Flickering
diffusion flames
Dilution
dilution
low speed
2008
3 引文 (Scopus)

Design and hand-eye coordination of a humanoid robot

Tsay, J. T-I. & Lai, C. H., 2008 十二月 1, p. 124-129. 6 p.

研究成果: Paper

End effectors
Robots
Self organizing maps
Neural networks
Binoculars
10 引文 (Scopus)

Effect of thickness to grain size ratio on drawability for micro deep drawing of AISI 304 stainless steel

Lee, R-S., Chen, C. H. & Gau, J. T., 2008 一月 1, p. 183-188. 6 p.

研究成果: Paper

Deep drawing
Stainless Steel
Stainless steel
Metal foil
Formability
4 引文 (Scopus)

Viscoelastic characterization of soft micropillars for cellular mechanics study

Lin, I. K., Liao, Y. M., Chen, K. S. & Zhang, X., 2008 一月 1, p. 278-280. 3 p.

研究成果: Paper

Polydimethylsiloxane
Mechanics
Viscoelasticity
Dynamic mechanical analysis
Compaction
2007

Full-scale analysis on fire characteristics of a furnished office room

Chen, K. J., Su, H. C., Wu, C. W., Pu, J. Y., Lin, T. H., Lai, C. M., Tsai, M. J. & Chen, C. J., 2007 十二月 1.

研究成果: Paper

Fires
Flashover
Flammable materials
Ignition
Heat flux

Numerical and experimental studies of flow field and heat transfer for high temperature exhaust gas over in-line tube banks

Liu, C. E., Jang, J-Y., Huang, T. S., Wang, P. H. & Chen, C. D., 2007 十二月 1.

研究成果: Paper

Exhaust gases
Flow fields
Nusselt number
Heat transfer
Recuperators
Proton exchange membrane fuel cells (PEMFC)
Computational fluid dynamics
Conjugate gradient method
Proton transfer
Navier Stokes equations
2006

A new friction model based on a hypothetical friction mechanism

Hsieh, C., Chen, Y. F. & Lee, S. Y., 2006 十二月 1, p. 182-187. 6 p.

研究成果: Paper

Friction
Model-based
Model
Mechanical Systems
Experiment
3 引文 (Scopus)

Experimental investigation of infrared rapid surface heating for injection molding

Chang, P. C. & Hwang, S-J., 2006 七月 10, p. 1285-1289. 5 p.

研究成果: Paper

Injection molding
Infrared radiation
Heating
Costs
Temperature

Experiments on breakup of water-in-diesel compound jets

Chiu, S. L., Chen, R. H., Pu, J. Y. & Lin, T. H., 2006 十二月 1.

研究成果: Paper

Water
Experiments
Oils
Wavelength
Drop breakup

Formation of gas-in-liquid compound drops

Lin, S. Y., Chiu, S. L., Chen, R. H., Pu, J. Y. & Lin, T-H., 2006 十二月 1.

研究成果: Paper

Gases
Liquids
Needles
Nozzles
Satellites
Propane
Heat losses
Water
Air
Liquids
5 引文 (Scopus)

True 3D numerical simulation for micro injection molding

Yang, W. H., Chang, D., Yang, V., Chang, P. C. & Hwang, S-J., 2006 七月 10, p. 1270-1274. 5 p.

研究成果: Paper

Injection molding
Molding
Microstructure
Computer simulation
Experiments