每年專案
個人檔案
學歷
- 2007 ~ 2011 加拿大維多利亞大學機械工程 博士
- 2002 ~ 2004 國立台灣大學應用力學研究所 碩士
- 1998 ~ 2002 國立成功大學造船及船舶機械工程學系 學士
經歷
- 2018/08 ~ present 國立成功大學航空太空工程學系 助理教授
- 2014/03 ~ 2018/07 台灣中央研究院環境變遷研究中心 博士後研究學者
- 2011/02 ~ 2013/12 加拿大皇后大學燃料電池研究中心 博士後
研究專長
- 多孔介質
- 計算流體力學
- 雲物理
- 環境系統熱質傳遞
與 UN SDG 相關的專業知識
聯合國會員國於 2015 年同意 17 項全球永續發展目標 (SDG),以終結貧困、保護地球並確保全體的興盛繁榮。此人的作品有助於以下永續發展目標:
指紋
查看啟用 Chih-Che Chueh 的研究主題。這些主題標籤來自此人的作品。共同形成了獨特的指紋。
- 1 類似的個人檔案
過去五年中的合作和熱門研究領域
國家/地區層面的近期外部共同作業。按一下圓點深入探索詳細資料,或
專案
- 5 已完成
-
Numerical investigation of melting of a phase-change material in H-type shell tubes
Chueh, C. C. & Hung, S. C., 2024 1月 5, 於: Applied Thermal Engineering. 236, 121470.研究成果: Article › 同行評審
-
Numerical Analysis of a 3D PCM-embedded Evaporator with Serpentine Flow Channels for Low-grade Waste Heat Recovery from the Organic Rankine Cycle
Chen, K. J., Xie, J. Y. & Chueh, C. C., 2023 3月 1, 於: Journal of Aeronautics, Astronautics and Aviation. 55, 1, p. 55-64 10 p.研究成果: Article › 同行評審
1 引文 斯高帕斯(Scopus) -
Numerical thermal–hydraulic analysis and multiobjective design optimization of a printed circuit heat exchanger with airfoil overlap fin channels
Kuo, G. C., Xie, J. Y. & Chueh, C. C., 2023, (Accepted/In press) 於: Engineering Reports.研究成果: Article › 同行評審
開啟存取 -
Heat transfer performance comparison of printed circuit heat exchangers with straight, zigzag and serpentine flow channels for waste heat recovery
Xie, J. Y., Chueh, C. C., Chen, W. H. & Chen, K. J., 2022 2月, 於: International Journal of Energy Research. 46, 2, p. 1722-1735 14 p.研究成果: Article › 同行評審
5 引文 斯高帕斯(Scopus) -
Operation and Multi-Objective Design Optimization of a Plate Heat Exchanger with Zigzag Flow Channel Geometry
Chen, W. H., Li, Y. W., Chang, M. H., Chueh, C. C., Ashokkumar, V. & Saw, L. H., 2022 11月, 於: Energies. 15, 21, 8205.研究成果: Article › 同行評審
開啟存取1 引文 斯高帕斯(Scopus)