Chih-Han Chang

2005

Maxillofacial growth in children with unilateral cleft lip and palate following secondary alveolar bone grafting: An interim evaluation

Chang, H. P., Chuang, M. C., Yang, Y. H., Liu, P. H., Chang, C. H., Cheng, C. F. & Lai, J. P., 2005 3月, 於: Plastic and Reconstructive Surgery. 115, 3, p. 687-695 9 p.

研究成果: Article › 同行評審

28 引文斯高帕斯（Scopus）

Midfacial and mandibular morphometry of children with Class II and Class III malocclusions

Chang, H. P., Lin, H. C., Liu, P. H. & Chang, C. H., 2005 9月, 於: Journal of Oral Rehabilitation. 32, 9, p. 642-647 6 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

2004

Cavity dimension effect on MOD dental restoration filled with resin composite - A finite element interface stress evaluation

Chang, C. H., Fang, C. L., Hsu, J. T., Chen, C. P. & Chuang, S. F., 2004 12月, 於: Journal of Medical and Biological Engineering. 24, 4, p. 195-200 6 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Effects of liner stiffness for trans-tibial prosthesis: A finite element contact model

Lin, C. C., Chang, C. H., Wu, C. L., Chung, K. C. & Liao, I. C., 2004 1月, 於: Medical Engineering and Physics. 26, 1, p. 1-9 9 p.

研究成果: Article › 同行評審

43 引文斯高帕斯（Scopus）

Influence of flowable composite lining thickness on class II composite restorations

Chuang, S. F., Jin, Y. T., Liu, J. K., Chang, C. H. & Shieh, D. B., 2004, 於: Operative Dentistry. 29, 3, p. 301-308 8 p.

研究成果: Article › 同行評審

65 引文斯高帕斯（Scopus）

The effect of retainer thickness on posterior resin-banded prostheses: A finite element study

Lin, T. S., Lin, C. L., Wang, C. H., Chang, C. H. & Chang, Y. H., 2004 11月, 於: Journal of Oral Rehabilitation. 31, 11, p. 1123-1129 7 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

Treatment effects of chin cup appliance on mandible in Class III malocclusion: Strain tensor analysis. A pilot study

Liu, P. H., Chang, C-H., Chang, H. P. & Chang, H. F., 2004 9月 1, 於: Quintessence International. 35, 8, p. 621-629 9 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

2003

A proposal for the pre-evaluation protocol of below-knee socket design - integration pain tolerance with finite element analysis

Wu, C. L., Chang, C. H., Hsu, A. T., Lin, C. C., Chen, S. I. & Chang, G. L., 2003 1月 1, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 853-860 8 p.

研究成果: Article › 同行評審

19 引文斯高帕斯（Scopus）

Biomechanical investigation of pedicle screw-vertebrae complex: A finite element approach using bonded and contact interface conditions

Chen, S. I., Lin, R. M. & Chang, C. H., 2003 5月, 於: Medical Engineering and Physics. 25, 4, p. 275-282 8 p.

研究成果: Article › 同行評審

86 引文斯高帕斯（Scopus）

Determination of young's modulus of cortical bone directly from computed tomography: A rabbit model

Chen, W. P., Hsu, J. T. & Chang, C. H., 2003 1月 1, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 737-745 9 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Effects of lining materials on microleakage and internal voids of Class II resin-based composite restorations

Chuang, S. F., Jin, Y. T., Lin, T. S., Chang, C. H. & García-Godoy, F., 2003 4月, 於: American Journal of Dentistry. 16, 2, p. 84-90 7 p.

研究成果: Article › 同行評審

36 引文斯高帕斯（Scopus）

Finite element analysis of the effect of motorcycle helmet materials against impact velocity

Chang, L. T., Chang, G. L., Huang, J. Z., Huang, S. C., Liu, D. S. & Chang, C. H., 2003, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 835-843 9 p.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

Gait evaluation of biofeedback balance training for chronic stroke patients

Lin, C. C., Chung, K. C., Chang, C. H., Wu, C. L. & Liao, I. C., 2003, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 845-852 8 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Investigation of midfacial and mandibular morphology: Strain tensor analysis

Liu, P. H., Chang, C. H. & Chang, H. P., 2003, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 771-780 10 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Numerical investigation of retainer thickness affecting retention in posterior resin-bonded prosthesis using the finite element method

Lin, C. L., Lin, T. S., Hsu, K. W., Wu, C. H. & Chang, C. H., 2003 1月 1, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 26, 6, p. 781-789 9 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

2002

An intra-oral hydraulic system for controlled loading of dental implants

Ko, C. C., Swift, J. Q., DeLong, R., Douglas, W. H., Kim, Y. I., An, K. N., Chang, C. H. & Huang, H. L., 2002, 於: Journal of Biomechanics. 35, 6, p. 863-869 7 p.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

Determining the resting position of the glenohumeral joint: A cadaver study

Hsu, A. T., Chang, J. H. & Chang, C. H., 2002 12月 1, 於: Journal of Orthopaedic and Sports Physical Therapy. 32, 12, p. 605-612 8 p.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

Stresses at the cervical lesion of maxillary premolar - A finite element investigation

Lee, H. E., Lin, C. L., Wang, C. H., Cheng, C. H. & Chang, C. H., 2002, 於: Journal of Dentistry. 30, 7-8, p. 283-290 8 p.

研究成果: Article › 同行評審

84 引文斯高帕斯（Scopus）

The effect of material inhomogeneous for femoral finite element analysis

Chang, C-H., Hsu, J. T., Chen, S. I., Chen, W. P. & Chang, G. L., 2002 9月 1, 於: Journal of Medical and Biological Engineering. 22, 3, p. 121-128 8 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

Thin-plate spline (TPS) graphical analysis of the mandible on cephalometric radiographs

Chang, H. P., Liu, P. H., Chang, H. F. & Chang, C. H., 2002 3月 1, 於: Dentomaxillofacial Radiology. 31, 2, p. 137-141 5 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

Thin-plate spline graphical analysis of the mandible in mandibular prognathism

Chang, H. F., Chang, H. P., Liu, P. H. & Chang, C. H., 2002 11月 1, 於: Journal of the Formosan Medical Association. 101, 11, p. 790-794 5 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2001

Computer aided analysis of bone remodeling after total hip replacement

Lin, C. L., Chang, C. H., Lai, K. A., Lin, T. H. & Chang, W. J., 2001, 於: Journal of Medical and Biological Engineering. 21, 3, p. 161-166 6 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Finite element analysis of the interface stresses between the stump and socket for a below-knee amputee

Lin, C. C., Chang, C. H., Wu, J. L., Wu, C. L., Liao, I. C. & Juan, H. H., 2001, 於: Journal of Medical and Biological Engineering. 21, 1, p. 23-30 8 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Fit effect of motorcycle helmet - A finite element modeling

Chang, L. T., Chang, C. H. & Chang, G. L., 2001 1月, 於: JSME International Journal, Series A: Solid Mechanics and Material Engineering. 44, 1, p. 185-192 8 p.

研究成果: Article › 同行評審

開啟存取

22 引文斯高帕斯（Scopus）

Geometric morphometric analysis of midfacial complex in Class III malocclusion

Liu, P. H., Chang, C. H. & Chang, H. P., 2001, 於: Journal of Medical and Biological Engineering. 21, 3, p. 167-174 8 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Integration of CAD and FE Method to simulate the pedicle screw within the vertebra

Chen, S. I., Chang, C. H. & Lin, R. M., 2001, 於: Journal of Medical and Biological Engineering. 21, 3, p. 175-182 8 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Multifactorial analysis of an MOD restored human premolar using auto-mesh Finite Element approach

Lin, C. L., Chang, C. H. & Ko, C. C., 2001 6月, 於: Journal of Oral Rehabilitation. 28, 6, p. 576-585 10 p.

研究成果: Article › 同行評審

83 引文斯高帕斯（Scopus）

Numerical investigation of the factors affecting interfacial stresses in an MOD restored tooth by auto-meshed finite element method

Lin, C. L., Chang, C. H., Wang, C. H., Ko, C. C. & Lee, H. E., 2001 6月, 於: Journal of Oral Rehabilitation. 28, 6, p. 517-525 9 p.

研究成果: Article › 同行評審

40 引文斯高帕斯（Scopus）

The morphometric analysis for Class III malocclusion of chin cup therapy

Liu, P. H., Chang, C. H. & Chang, H. P., 2001, 於: Journal of Medical and Biological Engineering. 21, 1, p. 51-59 9 p.

研究成果: Article › 同行評審

The morphometric analysis of cranial base in Class III malocclusion

Liu, P. H., Chang, C. H. & Chang, H. P., 2001, 於: Journal of Medical and Biological Engineering. 21, 1, p. 43-50 8 p.

研究成果: Article › 同行評審

2000

An in vitro monitoring system for simulated thermal process in cryosurgery

Yang, W. H., Peng, H. H., Chang, H. C., Shen, S. Y., Wu, C. L. & Chang, C. H., 2000 3月, 於: Cryobiology. 40, 2, p. 159-170 12 p.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

Head injury in facial impact - A finite element analysis of helmet chin bar performance

Chang, C. H., Chang, L. T., Chang, G. L., Huang, S. C. & Wang, C. H., 2000, 於: Journal of Biomechanical Engineering. 122, 6, p. 640-646 7 p.

研究成果: Article › 同行評審

20 引文斯高帕斯（Scopus）

Standard study for motorcycle helmet against head injury in craniofacial impacts

Chang, L. T., Chang, C-H. & Chang, G. L., 2000, 於: Chinese Journal of Medical and Biological Engineering. 20, 3, p. 151-158 8 p.

研究成果: Article › 同行評審

Vehicle occupant response to rear-end impacts

Huang, S. C., Chu, J. Y. & Chang, C. H., 2000, 於: International Journal of Vehicle Design. 24, 2, p. 198-210 13 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

1999

Automatic finite element mesh generation for maxillary second premolar

Lin, C. L., Chang, C. H., Cheng, C. S., Wang, C. H. & Lee, H. E., 1999 6月, 於: Computer Methods and Programs in Biomedicine. 59, 3, p. 187-195 9 p.

研究成果: Article › 同行評審

45 引文斯高帕斯（Scopus）

Experimental evaluation of chin bar on head injury in facial impact

Chang, L. T., Chang, C. H. & Chang, G. L., 1999, 於: JSME International Journal, Series A: Mechanics and Material Engineering. 42, 2, p. 294-300 7 p.

研究成果: Article › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

Modeling of occupant dynamics during automobile rear-end impacts

Huang, S. C., Chu, J. Y. & Chang, C. H., 1999, 於: Bio-Medical Materials and Engineering. 9, 5-6, p. 335-345 11 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Osteoporotic lumbar spine finite element analysis

Chen, S. I., Chang, C-H., Lin, R. M. & Lin, T. S., 1999 12月 9, 於: Chinese Journal of Medical and Biological Engineering. 19, 3, p. 219-227 9 p.

研究成果: Article › 同行評審

The finite element analysis of the patellofemoral joint

Chang, C. H., Renn, W. J., Yang, C. Y., Chen, S. I. & Wu, S. W., 1999 12月 1, 於: Chinese Journal of Medical and Biological Engineering. 19, 4, p. 233-238 6 p.

研究成果: Article › 同行評審

1998

Analysis and converge study of three dimensional finite element lumber spine model

Chen, S. I., Chang, C-H., Lin, C. L. & Lin, C. Y., 1998 1月 1, 於: Chinese Journal of Medical and Biological Engineering. 18, 2, p. 107-114 8 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

The finite element analysis on the chin bar of motorcycle helmet

Wang, C. H., Chang, C-H., Huang, S. C. & Chang, L. T., 1998 1月 1, 於: Chinese Journal of Medical and Biological Engineering. 18, 2, p. 121-128 8 p.

研究成果: Article › 同行評審

Three dimensional finite element meshing generation for maxillary second premolar

Lin, C. L., Chang, C. H., Wang, C. H., Cheng, C. S. & Lee, H. E., 1998, 於: Chinese Journal of Medical and Biological Engineering. 18, 2, p. 89-95 7 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

1997

Automated three - Dimensional finite-element meshing for total hip prosthesis

Lin, C. L. & Chang, C. H., 1997 12月 1, 於: Chinese Journal of Medical and Biological Engineering. 17, 4, p. 277-284 8 p.

研究成果: Article › 同行評審

The study of the chin bar standard problem of motorbike helmet

Chang, L. T., Chang, C. H., Lin, C. Y. & Chang, G. L., 1997 12月 1, 於: Chinese Journal of Medical and Biological Engineering. 17, 4, p. 223-230 8 p.

研究成果: Article › 同行評審

張 志涵

研究成果

搜尋結果

張志涵