Fei-Yi Hung

2023

A Technology for Bonding Cu Wires with Cu Pads: Structure and Electrical Fatigue Mechanism of Fine Micro-alloyed Cu Wires

Zhao, J. R., Chen, Y. J. & Hung, F. Y., 2023 6月, 於: Journal of Electronic Materials. 52, 6, p. 4169-4178 10 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Effect of tensile loading–unloading cyclic plastic deformation on 4043 aluminum alloy manufactured through CCDR

Huang, B. C. & Hung, F. Y., 2023 3月, 於: Materials Today Communications. 34, 104979.

研究成果: Article › 同行評審

Metallographic Mechanism of Embrittlement of 15 μm Ultrafine Quaternary Silver Alloy Bonding Wire in Chloride Ions Environment

Zhao, J. R., Hung, F. Y. & Hsu, C. W., 2023 2月, 於: Materials. 16, 3, 1066.

研究成果: Article › 同行評審

開啟存取

Microstructure and fracture toughness of hot-rolling biomedical degradable ZKX500 magnesium bone plates

Huang, Y. T., Hung, F. Y. & Yen, C. W., 2023 9月, 於: Micron. 172, 103500.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Study of electrical and fatigue properties of copper micro-alloyed wires in IGBT subject to chloride corrosion

Wu, B. D. & Hung, F. Y., 2023 8月, 於: Materials Today Communications. 36, 106888.

研究成果: Article › 同行評審

Study of tensile properties, electrothermal characteristics and packaging reliability on Cu–Pt–Au–Pd fine micro-alloyed wire

Hsu, S. T., Hung, F. Y. & Wu, B. D., 2023 5月, 於: Journal of Materials Science: Materials in Electronics. 34, 14, 1130.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2022

A Novel Two-Stage Heat Treatment with Medium-Temperature Aging Influence on Microstructure, Al₃(Sc, Zr) Nanoprecipitation, and Application Properties, Enhancing Selective Laser Melting of Al–Mg–Sc–Zr Alloy

Zhao, J. R., Lee, L. Y., Chang, K. C. & Hung, F. Y., 2022 6月 1, 於: Nanomaterials. 12, 12, 2078.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

A Study on the Structure and Biomedical Application Characteristics of Phosphate Coatings on ZKX500 Magnesium Alloys

Huang, Y. T., Wu, W. Y., Hung, F. Y., Kuan, F. C., Hsu, K. L., Su, W. R. & Yen, C. W., 2022 10月, 於: Bioengineering. 9, 10, 542.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Charge-Discharge Properties of Sputtered Mg Anode in Flexible All-Solid-State Mg-Ion Batteries

Chen, K. J., Hung, F. Y. & He, Y. T., 2022 11月 29, 於: ACS Omega. 7, 47, p. 43161-43168 8 p.

研究成果: Article › 同行評審

開啟存取

Interface Characteristics, Erosion Behavior, and Thermal Shock Resistance of Al-Ta Alloy Coatings Produced by Arc Spraying

Zhao, J. R., Hung, F. Y. & Wu, S. C., 2022 11月 1, 於: IEEE Transactions on Semiconductor Manufacturing. 35, 4, p. 698-705 8 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Mechanical properties and biomedical application characteristics of degradable polylactic acid–Mg–Ca₃(PO₄)₂ three-phase composite

Chen, K. J., Hung, F. Y., Wang, Y. T. & Yen, C. W., 2022 1月, 於: Journal of the Mechanical Behavior of Biomedical Materials. 125, 104949.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Microstructure, Tensile Mechanical Properties and Electrical Fatigue Mechanism of a Microalloyed Copper Wire

Zhao, J. R., Lin, Y. C. & Hung, F. Y., 2022 10月, 於: Journal of Electronic Materials. 51, 10, p. 5857-5868 12 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

The electrothermal fracture mechanism between aluminum and copper wires

Wu, B. D. & Hung, F. Y., 2022 12月, 於: Microelectronics Reliability. 139, 114819.

研究成果: Article › 同行評審

2021

Al₂ o₃ particle erosion induced phase transformation: Structure, mechanical property, and impact toughness of an slm al-10si-mg alloy

Huang, B. C. & Hung, F. Y., 2021 8月, 於: Nanomaterials. 11, 8, 2131.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life

Zhao, J. R., Hung, F. Y., Lu, C. S. & Lai, I. C., 2021 6月, 於: Advanced Engineering Materials. 23, 6, 2001366.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Effect of electrification and chlorination on the microstructure and electrical properties of fine Al wires

Wu, B. D. & Hung, F. Y., 2021 9月, 於: Microelectronics Reliability. 124, 114234.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: Cold rolling characteristics and tensile fracture properties

Zhao, J. R., Hung, F. Y. & Chen, B. J., 2021 3月, 於: Journal of Materials Research and Technology. 11, p. 535-547 13 p.

研究成果: Article › 同行評審

開啟存取

14 引文斯高帕斯（Scopus）

Effects of hyper-high-temperature solid-solution treatment on microstructure evolution and nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc alloy manufactured by selective laser melting

Chang, K. C., Zhao, J. R. & Hung, F. Y., 2021 11月 25, 於: Journal of Alloys and Compounds. 883, 160781.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Microstructure, mechanical properties, and fatigue fracture characteristics of high-fracture-resistance selective laser melting Al-Ni-Cu alloys

Chang, K. C., Zhao, J. R. & Hung, F. Y., 2021 1月, 於: Metals. 11, 1, p. 1-13 13 p., 87.

研究成果: Article › 同行評審

開啟存取

14 引文斯高帕斯（Scopus）

Microstructure, mechanical properties, degradation behavior, and implant testing of hot-rolled biodegradable zkx500 magnesium alloy

Huang, Y. T., Hung, F. Y., Kuan, F. C., Hsu, K. L., Su, W. R. & Lin, C. Y., 2021 11月 1, 於: Applied Sciences (Switzerland). 11, 22, 10677.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Novel photovoltaic ribbon technology: Interfacial behavior of In–50Sn alloy ribbon without metal matrix under electrothermal effects and chlorine corrosion

Chen, K. J., Fang, Y. H. & Hung, F. Y., 2021 3月, 於: Materials Today Communications. 26, 101865.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Optical, Microstructure, and Electromagnetic Properties of (1 − x)ZnO − xCuO Powders Prepared Using Two-Stage Sintering and Direct Synthesis

Liu, T. H., Hung, F. Y., Chen, C. H. & Chen, K. J., 2021 3月, 於: JOM. 73, 3, p. 815-822 8 p.

研究成果: Article › 同行評審

Study on microstructure, mechanical properties and erosion characteristics of Al-Si Alloy manufactured by continuous casting direct rolling process

Huang, B. C., Chang, K. C. & Hung, F. Y., 2021 9月, 於: Applied Sciences (Switzerland). 11, 18, 8351.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

2020

A new infrared heat treatment on hot forging 7075 aluminum alloy: Microstructure and mechanical properties

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2020 3月 1, 於: Materials. 13, 5, 1177.

研究成果: Article › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

Biodegradation ZK50 magnesium alloy compression screws: Mechanical properties, biodegradable characteristics and implant test

Chen, Y. T., Hung, F. Y., Lin, Y. L. & Lin, C. Y., 2020 11月, 於: Journal of Orthopaedic Science. 25, 6, p. 1107-1115 9 p.

研究成果: Article › 同行評審

17 引文斯高帕斯（Scopus）

Erosion resistance and particle erosion-induced tensile embrittlement of 3d-selective laser melting inconel 718 superalloy

Zhao, J. R., Hung, F. Y. & Lui, T. S., 2020 1月, 於: Metals. 10, 1, 21.

研究成果: Article › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

Improving the applicability of wear-resistant Al–10Si–0.5 Mg alloy obtained through selective laser melting with T6 treatment in high-temperature, and high-wear environments

Chen, K-J., Hung, F. Y., Lui, T-S. & Tsai, C. L., 2020 7月 1, 於: Journal of Materials Research and Technology. 9, 4, p. 9242-9252 11 p.

研究成果: Article › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

Interface behavior and electrical properties of Zn–Sn–Cu (CTZ) stacking layer films with thermal diffusion and electrically induced crystallization

Liu, T. H., Hung, F. Y. & Chen, K-J., 2020 11月 1, 於: Journal of Materials Research and Technology. 9, 6, p. 15547-15554 8 p.

研究成果: Article › 同行評審

開啟存取

Microstructure, optical, electrical, and magnetic properties of ZnO/CuO thin films prepared using two-stage magnetron sputtering and diffusion doping process

Liu, T. H., Hung, F. Y., Chen, C. H. & Chen, K. J., 2020 3月 1, 於: Journal of Materials Science: Materials in Electronics. 31, 5, p. 4017-4026 10 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Microstructure and tensile fracture behavior of three-stage heat treated inconel 718 alloy produced via laser powder bed fusion process

Zhao, J. R., Hung, F. Y. & Lui, T. S., 2020, 於: Journal of Materials Research and Technology. 9, 3, p. 3357-3367 11 p.

研究成果: Article › 同行評審

開啟存取

45 引文斯高帕斯（Scopus）

Opto-electromagnetic properties of carbon-doped zinc-oxide prepared using electrically induced crystallization and ion implantation process for gas sensor application

Liu, T. H., Hung, F. Y., Chien, T. & Chen, K. J., 2020 1月 1, 於: Journal of Materials Science: Materials in Electronics. 31, 1, p. 144-153 10 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Wedge bonding technologies: microstructure, mechanical properties and electrical properties of fine Al–Zn–Si alloy wire

Wu, B. D. & Hung, F. Y., 2020 6月 1, 於: Journal of Materials Science: Materials in Electronics. 31, 12, p. 9270-9283 14 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2019

A study of the sulfidation behavior on palladium-coated copper wire with a flash-gold layer (Pca) after wire bonding

Chen, K. J., Hung, F. Y. & Chang, C. Y., 2019 7月, 於: Electronics (Switzerland). 8, 7, 792.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Biodegradable implantation material: Mechanical properties and surface corrosion mechanism of Mg-1Ca-0.5Zr alloy

Chen, Y. T., Hung, F. Y. & Syu, J. C., 2019 8月, 於: Metals. 9, 8, 857.

研究成果: Article › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Embrittlement due to excess heat input into friction stir processed 7075 alloy

Ku, M. H., Hung, F. Y. & Lui, T. S., 2019 1月 10, 於: Materials. 12, 2, 227.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Examination of the high tensile ductility improvement in an As-solutionized AA7075 alloy with the aid of a friction stir process

Ku, M. H., Hung, F. Y. & Lui, T. S., 2019, 於: Metals. 9, 2, 196.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes

Lin, C. W., Chen, K. J., Hung, F. Y., Lui, T. S. & Chen, H. P., 2019 5月, 於: Journal of Materials Research and Technology. 8, 3, p. 3137-3148 12 p.

研究成果: Article › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

Low conductivity decay of Sn-0.7Cu-0.2Zn photovoltaic ribbons for solar cell application

Chen, K. J., Hung, F. Y., Lui, T. S. & Hsu, L., 2019 8月 1, 於: Micromachines. 10, 8, 550.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Particle erosion induced phase transformation of different matrix microstructures of powder bed fusion Ti-6Al-4V alloy flakes

Zhao, J. R., Hung, F. Y. & Lui, T. S., 2019 7月, 於: Metals. 9, 7, 730.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Study of electrical fatigue test in gold-coated siliver-4 wt.% palladium bonding wire

Ho, C. C., Chen, K. J., Hung, F. Y. & Lui, T. S., 2019 12月, 於: Microelectronics Reliability. 103, 113502.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Study of microstructure and tensile properties of infrared-heat-treated cast-forged 6082 aluminum alloy

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2019 1月, 於: Journal of Materials Research and Technology. 8, 1, p. 173-179 7 p.

研究成果: Article › 同行評審

18 引文斯高帕斯（Scopus）

Study of wire bonding reliability of Ag-Pd-Au alloy wire with flash-gold after chlorination and sulfidation

Wu, Y. H., Hung, F. Y., Lui, T. S. & Chen, K. J., 2019 8月, 於: Microelectronics Reliability. 99, p. 186-196 11 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

The effect of hyper-rotation on the Weibull distribution of tensile properties in a friction stirred AA7075 aluminum alloy

Ku, M. H., Hung, F. Y. & Lui, T. S., 2019 3月 15, 於: Materials Chemistry and Physics. 226, p. 290-295 6 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

The relationship of fracture mechanism between high temperature tensile mechanical properties and particle erosion resistance of selective laser melting Ti-6al-4v alloy

Zhao, J. R., Hung, F. Y., Lui, T. S. & Wu, Y. L., 2019 5月, 於: Metals. 9, 5, 501.

研究成果: Article › 同行評審

開啟存取

16 引文斯高帕斯（Scopus）

Wear Inducing Phase Transformation of Plasma Transfer Arc Coated Tools during Friction Stir Welding with Al Alloy

Chen, K. J., Hung, F. Y., Lui, T. S. & Shih, Y. R., 2019, 於: Journal of Engineering (United Kingdom). 2019, 6413608.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

2018

Effects of static heat and dynamic current on Al/Zn·Cu/Sn Solder/Ag interfaces of Sn photovoltaic Al-ribbon modules

Chen, K. J., Hung, F. Y., Lui, T. S. & Lin, W. Y., 2018 9月 7, 於: Materials. 11, 9, 1642.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Effects of tempered microstructure and hydrogen concentration on hydrogen-induced embrittlement susceptibility of 10B21 screws at low temperature

Chen, K. J., Hung, F. Y., Lui, T. S. & Tseng, C. H., 2018, 於: Materials Transactions. 59, 7, p. 1124-1129 6 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Enhanced formability and accelerated precipitation behavior of 7075 Al alloy extruded rod by high temperature aging

Ku, M. H., Hung, F. Y., Lui, T. S. & Lai, J. C., 2018 8月 17, 於: Metals. 8, 8, 648.

研究成果: Article › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

Enhancement of mechanical properties of hot-forged 6082 suspension parts via rapid IR heat treatment

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2018 7月, 於: Metals. 8, 7, 501.

研究成果: Article › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Enhancement of the young’s modulus through infrared heat treatment: A study of the microstructure and the mass effect of real body 6082 aluminum forgings

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2018 4月, 於: Metals. 8, 4, 239.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

洪 飛義

研究成果

搜尋結果

洪飛義