Fei-Yi Hung

2024

Advancements in microstructure, texture characterization, and mechanical properties of powder metallurgy Al-Si-Mg-Fe alloy for engineering applications

Chang, K. C., Hung, F. Y., Zhao, J. R. & Miu, C. F., 2024 2月 5, 於: Journal of Alloys and Compounds. 973, 172941.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

All-solid-state Li-ion battery: A study on the charge/discharge mechanism of an LMO-BCD-MgC system

Wu, P. T., Zhao, J. R., Hung, F. Y. & Kuan, H., 2024 6月, 於: Energy Storage. 6, 4, e664.

研究成果: Article › 同行評審

A new iron battery technology: Charge-discharge mechanism of ferrous chloride and ferric oxide electrolyte in all solid-state iron-graphite batteries

Chen, Z. Y., Hung, F. Y. & Zhao, J. R., 2024 5月, 於: Materials Science and Engineering: B. 303, 117305.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

A new secondary battery technology: Electrode structure and charge–discharge mechanism of all-solid-state zinc-graphite batteries

Zhao, J. R., Wang, I. H. & Hung, F. Y., 2024 1月, 於: Materials Science and Engineering: B. 299, 116975.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Application of New Al-Si Welding Filler with High Concentration of Copper and Magnesium: High-Temperature Strength and Anti-Corrosion Mechanism

Zhao, J. R., Hung, F. Y. & Pan, C. Y., 2024 1月, 於: Materials. 17, 1, 126.

研究成果: Article › 同行評審

開啟存取

A Study on Surface Modification Characteristics and Charge–Discharge Mechanism of Natural Serpentinite Ore Secondary Battery

Zhao, J. R., Chen, K-J., Hung, F. Y., Tsai, Y. Y. & Wu, P. T., 2024 1月, 於: Inorganics. 12, 1, 13.

研究成果: Article › 同行評審

開啟存取

A study on thermal-induced phase transformation behavior and deterioration mechanism of 310S stainless steel

Yen, Y. W., Hung, F. Y., Zhao, J. R., Wu, B. D. & Hsieh, H. Y., 2024 6月, 於: Journal of Alloys and Metallurgical Systems. 6, 100069.

研究成果: Article › 同行評審

開啟存取

Chlorination for all solid-state zinc-graphite battery: Investigate into the charge-discharge mechanism of zinc electrodes and sodium silicate electrolyte

Hsiao, Y. F., Hung, F. Y. & Zhao, J. R., 2024 3月, 於: Materials Science and Engineering: B. 301, 117146.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Effects of Heat-Treatment and Cold-Rolling on Mechanical Properties and Impact Failure Resistance of New Al 6082 Aluminum Alloy by Continuous Casting Direct Rolling Process

Zhao, J. R., Hung, F. Y. & Chen, J. H., 2024 2月, 於: Materials. 17, 4, 805.

研究成果: Article › 同行評審

開啟存取

Jet-Printable, Low-Melting-Temperature Ga–xSn Eutectic Composites: Application in All-Solid-State Batteries

Chen, K-J., Hung, F. Y. & Liao, H. C., 2024 3月, 於: Materials. 17, 5, 995.

研究成果: Article › 同行評審

開啟存取

Mechanisms of electrical fatigue and oxidation corrosion failure of micro-alloyed copper wire

Wu, B. D., Hung, F. Y. & Chang, K. C., 2024 5月, 於: Materials Science and Engineering: B. 303, 117301.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Preliminary study of novel all-solid-state tin-graphite battery based on composite solid electrolyte

Huang, P. Y., Hung, F. Y. & Huang, B. C., 2024 3月, 於: Energy Storage. 6, 2, e603.

研究成果: Article › 同行評審

Study and Application on the Electromagnetic Stainless Steel: Microstructure, Tensile Mechanical Behavior, and Magnetic Properties

Lu, C. W., Hung, F. Y., Chang, T. W. & Hsieh, H. Y., 2024 6月, 於: Materials. 17, 12, 2998.

研究成果: Article › 同行評審

開啟存取

Study of engineering developing decagonal-like rational approximant structure of Al–Ni–Cu–Fe–Mn–Cr senary system in aluminum alloy through additive manufacturing

Chang, K. C., Hung, F. Y. & Zhao, J. R., 2024 8月, 於: Materials Today Advances. 23, 100513.

研究成果: Article › 同行評審

開啟存取

Study on microstructure and charge–discharge mechanism of all solid-state indium-graphite batteries

Huang, B. C., Fan, W. C. & Hung, F. Y., 2024 2月, 於: Energy Storage. 6, 1, e544.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2023

A study on structural characteristics and metallurgical mechanism of carbides for 440 martensitic stainless steel with different melt refining processes

Kuo, Y. A., Hung, F. Y., Zhao, J. R., Wu, B. D., Huang, B. C., Chang, K. C., Chen, K. J., Ku, C. W., Huang, C. Y. & Hsieh, H. Y., 2023 9月, 於: Journal of Alloys and Metallurgical Systems. 3, 100029.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

A Technology for Bonding Cu Wires with Cu Pads: Structure and Electrical Fatigue Mechanism of Fine Micro-alloyed Cu Wires

Zhao, J. R., Chen, Y. J. & Hung, F. Y., 2023 6月, 於: Journal of Electronic Materials. 52, 6, p. 4169-4178 10 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Effect of High Temperature and Thermal Cycle of 4043 Al Alloy Manufactured through Continuous Casting Direct Rolling

Huang, B. C. & Hung, F. Y., 2023 11月, 於: Materials. 16, 22, 7176.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Effect of tensile loading–unloading cyclic plastic deformation on 4043 aluminum alloy manufactured through CCDR

Huang, B. C. & Hung, F. Y., 2023 3月, 於: Materials Today Communications. 34, 104979.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Effects of the microstructure and texture characteristics on mechanical properties of the Al–Ni–Cu–Fe alloy manufactured by laser powder bed fusion

Chang, K. C., Zhao, J. R. & Hung, F. Y., 2023 11月 1, 於: Journal of Materials Research and Technology. 27, p. 3411-3423 13 p.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Metallographic Mechanism of Embrittlement of 15 μm Ultrafine Quaternary Silver Alloy Bonding Wire in Chloride Ions Environment

Zhao, J. R., Hung, F. Y. & Hsu, C. W., 2023 2月, 於: Materials. 16, 3, 1066.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Microstructural Characteristics and Material Failure Mechanism of SLM Ti-6Al-4V-Zn Alloy

Cheng, Y. J., Hung, F. Y. & Zhao, J. R., 2023 12月, 於: Materials. 16, 23, 7341.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Microstructure, mechanical properties and biomedical application of medical implantable extruded Mg-Zn-Zr-Ca alloy

Huang, Y. T., Lee, C. J., Hung, F. Y. & Yen, C. W., 2023 12月 1, 於: Materials Research Express. 10, 12, 125404.

研究成果: Article › 同行評審

開啟存取

Microstructure and fracture toughness of hot-rolling biomedical degradable ZKX500 magnesium bone plates

Huang, Y. T., Hung, F. Y. & Yen, C. W., 2023 9月, 於: Micron. 172, 103500.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Microstructure and mechanical properties of 631 Stainless Steel: Study of Yield Slip and Strain Rate Mechanism with Austempering and Martempering

Huang, C. T., Hung, F. Y., Zhao, J. R. & Hsieh, H. Y., 2023 6月, 於: Journal of Alloys and Metallurgical Systems. 2, 100015.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Study of electrical and fatigue properties of copper micro-alloyed wires in IGBT subject to chloride corrosion

Wu, B. D. & Hung, F. Y., 2023 8月, 於: Materials Today Communications. 36, 106888.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Study of tensile properties, electrothermal characteristics and packaging reliability on Cu–Pt–Au–Pd fine micro-alloyed wire

Hsu, S. T., Hung, F. Y. & Wu, B. D., 2023 5月, 於: Journal of Materials Science: Materials in Electronics. 34, 14, 1130.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

2022

A Novel Two-Stage Heat Treatment with Medium-Temperature Aging Influence on Microstructure, Al₃(Sc, Zr) Nanoprecipitation, and Application Properties, Enhancing Selective Laser Melting of Al–Mg–Sc–Zr Alloy

Zhao, J. R., Lee, L. Y., Chang, K. C. & Hung, F. Y., 2022 6月 1, 於: Nanomaterials. 12, 12, 2078.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

A Study on the Structure and Biomedical Application Characteristics of Phosphate Coatings on ZKX500 Magnesium Alloys

Huang, Y. T., Wu, W. Y., Hung, F. Y., Kuan, F. C., Hsu, K. L., Su, W. R. & Yen, C. W., 2022 10月, 於: Bioengineering. 9, 10, 542.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Charge-Discharge Properties of Sputtered Mg Anode in Flexible All-Solid-State Mg-Ion Batteries

Chen, K. J., Hung, F. Y. & He, Y. T., 2022 11月 29, 於: ACS Omega. 7, 47, p. 43161-43168 8 p.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Interface Characteristics, Erosion Behavior, and Thermal Shock Resistance of Al-Ta Alloy Coatings Produced by Arc Spraying

Zhao, J. R., Hung, F. Y. & Wu, S. C., 2022 11月 1, 於: IEEE Transactions on Semiconductor Manufacturing. 35, 4, p. 698-705 8 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Mechanical properties and biomedical application characteristics of degradable polylactic acid–Mg–Ca₃(PO₄)₂ three-phase composite

Chen, K. J., Hung, F. Y., Wang, Y. T. & Yen, C. W., 2022 1月, 於: Journal of the Mechanical Behavior of Biomedical Materials. 125, 104949.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Microstructure, Tensile Mechanical Properties and Electrical Fatigue Mechanism of a Microalloyed Copper Wire

Zhao, J. R., Lin, Y. C. & Hung, F. Y., 2022 10月, 於: Journal of Electronic Materials. 51, 10, p. 5857-5868 12 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

The electrothermal fracture mechanism between aluminum and copper wires

Wu, B. D. & Hung, F. Y., 2022 12月, 於: Microelectronics Reliability. 139, 114819.

研究成果: Article › 同行評審

2021

Al₂ o₃ particle erosion induced phase transformation: Structure, mechanical property, and impact toughness of an slm al-10si-mg alloy

Huang, B. C. & Hung, F. Y., 2021 8月, 於: Nanomaterials. 11, 8, 2131.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life

Zhao, J. R., Hung, F. Y., Lu, C. S. & Lai, I. C., 2021 6月, 於: Advanced Engineering Materials. 23, 6, 2001366.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Effect of electrification and chlorination on the microstructure and electrical properties of fine Al wires

Wu, B. D. & Hung, F. Y., 2021 9月, 於: Microelectronics Reliability. 124, 114234.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: Cold rolling characteristics and tensile fracture properties

Zhao, J. R., Hung, F. Y. & Chen, B. J., 2021 3月, 於: Journal of Materials Research and Technology. 11, p. 535-547 13 p.

研究成果: Article › 同行評審

開啟存取

19 引文斯高帕斯（Scopus）

Effects of hyper-high-temperature solid-solution treatment on microstructure evolution and nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc alloy manufactured by selective laser melting

Chang, K. C., Zhao, J. R. & Hung, F. Y., 2021 11月 25, 於: Journal of Alloys and Compounds. 883, 160781.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Microstructure, mechanical properties, and fatigue fracture characteristics of high-fracture-resistance selective laser melting Al-Ni-Cu alloys

Chang, K. C., Zhao, J. R. & Hung, F. Y., 2021 1月, 於: Metals. 11, 1, p. 1-13 13 p., 87.

研究成果: Article › 同行評審

開啟存取

18 引文斯高帕斯（Scopus）

Microstructure, mechanical properties, degradation behavior, and implant testing of hot-rolled biodegradable zkx500 magnesium alloy

Huang, Y. T., Hung, F. Y., Kuan, F. C., Hsu, K. L., Su, W. R. & Lin, C. Y., 2021 11月 1, 於: Applied Sciences (Switzerland). 11, 22, 10677.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Novel photovoltaic ribbon technology: Interfacial behavior of In–50Sn alloy ribbon without metal matrix under electrothermal effects and chlorine corrosion

Chen, K. J., Fang, Y. H. & Hung, F. Y., 2021 3月, 於: Materials Today Communications. 26, 101865.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Optical, Microstructure, and Electromagnetic Properties of (1 − x)ZnO − xCuO Powders Prepared Using Two-Stage Sintering and Direct Synthesis

Liu, T. H., Hung, F. Y., Chen, C. H. & Chen, K. J., 2021 3月, 於: JOM. 73, 3, p. 815-822 8 p.

研究成果: Article › 同行評審

Study on microstructure, mechanical properties and erosion characteristics of Al-Si Alloy manufactured by continuous casting direct rolling process

Huang, B. C., Chang, K. C. & Hung, F. Y., 2021 9月, 於: Applied Sciences (Switzerland). 11, 18, 8351.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

2020

A new infrared heat treatment on hot forging 7075 aluminum alloy: Microstructure and mechanical properties

Chang, Y. L., Hung, F. Y. & Lui, T. S., 2020 3月 1, 於: Materials. 13, 5, 1177.

研究成果: Article › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Biodegradation ZK50 magnesium alloy compression screws: Mechanical properties, biodegradable characteristics and implant test

Chen, Y. T., Hung, F. Y., Lin, Y. L. & Lin, C. Y., 2020 11月, 於: Journal of Orthopaedic Science. 25, 6, p. 1107-1115 9 p.

研究成果: Article › 同行評審

19 引文斯高帕斯（Scopus）

Erosion resistance and particle erosion-induced tensile embrittlement of 3d-selective laser melting inconel 718 superalloy

Zhao, J. R., Hung, F. Y. & Lui, T. S., 2020 1月, 於: Metals. 10, 1, 21.

研究成果: Article › 同行評審

開啟存取

14 引文斯高帕斯（Scopus）

Improving the applicability of wear-resistant Al–10Si–0.5 Mg alloy obtained through selective laser melting with T6 treatment in high-temperature, and high-wear environments

Chen, K-J., Hung, F. Y., Lui, T-S. & Tsai, C. L., 2020 7月 1, 於: Journal of Materials Research and Technology. 9, 4, p. 9242-9252 11 p.

研究成果: Article › 同行評審

開啟存取

22 引文斯高帕斯（Scopus）

Interface behavior and electrical properties of Zn–Sn–Cu (CTZ) stacking layer films with thermal diffusion and electrically induced crystallization

Liu, T. H., Hung, F. Y. & Chen, K. J., 2020 11月 1, 於: Journal of Materials Research and Technology. 9, 6, p. 15547-15554 8 p.

研究成果: Article › 同行評審

開啟存取

Microstructure, optical, electrical, and magnetic properties of ZnO/CuO thin films prepared using two-stage magnetron sputtering and diffusion doping process

Liu, T. H., Hung, F. Y., Chen, C. H. & Chen, K. J., 2020 3月 1, 於: Journal of Materials Science: Materials in Electronics. 31, 5, p. 4017-4026 10 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

洪 飛義

研究成果

搜尋結果

洪飛義