每年研究計畫
個人檔案
學歷
- 1984 西德阿亨工業大學冶材所博士
研究專長
- 製造與材料
經歷
- 1981年2月 ~ 1984年6月 德國阿亨工業大學電子顯微鏡實驗室研究助理
- 1984年8月 ~ 1991年7月 國立成功大學機械工程學系副教授
- 1986年 ~ 迄今 國科會台南貴儀中心指導教授
- 1988年 中國機械工程學會高雄分會(44屆)理事
- 1988年 台南區車鑑會鑑定委員
- 1988年8月 ~ 1988年10月 德國丹斯泰大學客座研究
- 1990年 ~ 1996年 金屬工業研究發展中心諮議委員
- 1990年 ~ 迄今 中國材料學會破壞科學委員會委員
- 1991年1月 ~ 1992年2月 澳洲南澳大學客座研究
- 1991年8月 ~ 迄今 國立成功大學機械工程學系教授
- 1994年 ~ 迄今 中國金屬熱處理學會理事
- 1994年8月 ~ 1997年7月 國立成功大學慶齡工業技術研究發展中心副主任
- 1997年 ~ 迄今 中國礦冶工程學會冶金委員會委員
- 1997年6月 ~ 1997年9月 德國阿亨工業大學客座研究
- 2002年6月 ~ 2002年9月 日本東京工業大學客座研究
- 2002年8月 國立成功大學儀器設備中心主任
- 2002年8月 國科會成大貴儀中心主任
指紋 查看啟用 Hwa-Teng Lee 的研究主題。這些主題標籤來自此人的作品。共同形成了獨特的指紋。
Soldering alloys
Engineering & Materials Science
solders
Physics & Astronomy
Microstructure
Engineering & Materials Science
microstructure
Physics & Astronomy
Electric arc welding
Engineering & Materials Science
Tungsten
Chemical Compounds
Welds
Engineering & Materials Science
Residual stresses
Engineering & Materials Science
網絡
國家層面的近期外部合作。點選圓點深入探索詳細資料。
研究成果 1988 2019
Enhanced cell proliferation on biomedical titanium surfaces by laser ablation-induced micro- And nanoscale hybrid structures
Lee, H-T. & Lin, C. C., 2019 一月 1, 於 : Materials Transactions. 60, 9, p. 1799-1806 8 p.研究成果: Article
hybrid structures
Cell proliferation
Laser ablation
Titanium
microbalances
The influence of mg-based inclusions on the grain boundary mobility of austenite in ss400 steel
Lai, C. T., Lai, H. H., Su, Y. H. F., Huang, F. Y., Lin, C. K., Kuo, J. C. & Lee, H. T., 2019 三月, 於 : Metals. 9, 3, 370.研究成果: Article
開啟存取
Steel
Austenite
Grain boundaries
Grain growth
Temperature
Alloy82銲道微結構與沿晶腐蝕阻抗之研究
Lee, H-T. & Liu, T. C., 2018 四月 1, 於 : Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 39, 2, p. 131-143 13 p.研究成果: Article
Corrosion resistance
Welds
Microstructure
Grain boundaries
Electric arc welding
1
引文
(Scopus)
Influence on Powders and Process Parameters on Bonding Shear Strength in Laser Cladding
Xu, M., Li, J., Lee, H-T., Sun, J., Li, F. & Zhao, Y., 2017 五月 5, 於 : Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 53, 9, p. 209-216 8 p.研究成果: Article
Laser Cladding
Laser cladding
Shear Strength
Process Parameters
Powder
1
引文
(Scopus)
The improvement of corrosion resistance of sensitized alloy 82 welds using laser surface melting
Lee, H-T. & Liu, T. C., 2017 一月 1, 於 : Materials Transactions. 58, 9, p. 1329-1336 8 p.研究成果: Article
corrosion resistance
Corrosion resistance
Welds
Melting
melting
論文
B添加對Sn-1 5Ag-0 7Cu-0 05Ni低銀無鉛銲料顯微組織與機械性質影響之研究
作者: 敬賀, 枋., 2018 八月 16監督員: Lee, H. (Supervisor)
學生論文: Master's Thesis
Effect of Boron Addition on Microstructure and Mechanical Properties of Low-Ag-content Lead-free Sn-1 5Ag-0 7Cu Solder Joints
作者: 祐誠, 梁., 2018 八月 16監督員: Lee, H. (Supervisor)
學生論文: Master's Thesis
In添加對Sn-1 5Ag-0 7Cu-0 05Ni低銀無鉛銲料顯微結構與機械性質影響之研究
作者: 怡靜, 蘇., 2018 八月 25監督員: Lee, H. (Supervisor)
學生論文: Master's Thesis
Nb添加對鎳基合金Alloy 52雷射覆銲銲道熱裂敏感性影響之研究
作者: 聖文, 曾., 2018 八月 8監督員: Lee, H. (Supervisor)
學生論文: Master's Thesis