監製作品
搜尋結果
-
Effect of Laser Power on Mechanical Properties and Microstructure of 316L Stainless Steel Deposited by Direct Energy Deposition(DED)
泰育邱 (Author), Kuo, J.-C. (Supervisor), 2019學生論文: Doctoral Thesis
-
Effect of Manganese Content and Cooling Rate on Transverse Crack in Low Carbon Steel
宗憲蔡 (Author), Kuo, J.-C. (Supervisor), 2019學生論文: Doctoral Thesis
-
Effects of Bismuth Addition on Microstructure and Mechanical Properties of SAC Solder Ball
琇涵湖 (Author), Kuo, J.-C. (Supervisor), 2020學生論文: Doctoral Thesis
-
Influence of Twin-Matrix Lamellae on Rolling Texture Simulation in Low Stacking Fault Energy F C C Metals Using Taylor-Based Models
昕瑩林 (Author), Kuo, J.-C. (Supervisor), 2019學生論文: Doctoral Thesis
-
Investigation of Microstructure and Mechanical Properties of Extruded AA6061 Rod and Plate
鵬威黃 (Author), Kuo, J.-C. (Supervisor), 2020學生論文: Doctoral Thesis
-
Investigation of Oxidation Behavior in High-Alloy Austenitic Stainless Steel Containing Nb
聖堯黃 (Author), Kuo, J.-C. (Supervisor), 2020學生論文: Doctoral Thesis
-
Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel
証文, 蕭 (Author), Kuo, J.-C. (Supervisor), 2017 7月 7學生論文: Doctoral Thesis
-
On Stress-Strain Method of Polycrystalline Copper from Spherical Indentation Using Finite Element Method
晏文劉 (Author), Kuo, J.-C. (Supervisor), 2020學生論文: Doctoral Thesis
-
Simulation of Flow Curve and Rolling Texture of Polycrystalline Copper Using Crystal Plasticity Finite Element Method (CP-FEM)
仲紹孫 (Author), Kuo, J.-C. (Supervisor), 2019學生論文: Doctoral Thesis
-
-
Study of Preferred Orientation in FePd Alloy Prepared by Electrodeposition and Thermo-mechanical Processes
鴻濱, 林 (Author), Kuo, J.-C. (Supervisor), 2014 8月 11學生論文: Doctoral Thesis
-
-
以EBSD分析HTST與HAST可靠度測試後銀-鈀/鋁及銀-金-鈀/鋁接合處之介金屬層
柏勲, 林 (Author), Kuo, J.-C. (Supervisor), 2015 2月 16學生論文: Master's Thesis
-
以ECCI技術分析變形與退火過程中Crofer 22 H不鏽鋼中差排組織之演化
庭宜, 吳 (Author), Kuo, J.-C. (Supervisor), 2017 8月 17學生論文: Master's Thesis
-
-
-
-
-
探討加速電壓和試片厚度對穿透式背向散射電子繞射技術之空間解析度的影響
智文, 施 (Author), Kuo, J.-C. (Supervisor), 2016 8月 11學生論文: Master's Thesis
-
探討沃斯田鐵晶粒尺寸及冷卻速率對SM570鋼的針狀肥粒鐵形成之影響
儀珊, 徐 (Author), Kuo, J.-C. (Supervisor), 2014 8月 13學生論文: Master's Thesis
-
探討直接能量雷射沉積之製程參數對單層沉積之316L不鏽鋼中結構與性質的影響
彥廷, 陳 (Author), Kuo, J.-C. (Supervisor), 2018 8月 16學生論文: Master's Thesis
-
探討原子序對穿透式背向散射電子繞射技術之空間解析度的影響
珈瑋, 郭 (Author), Kuo, J.-C. (Supervisor), 2017 7月 25學生論文: Master's Thesis
-
探討泰勒模型模擬和實驗間冷軋純銅優選方位強度差異之研究
世杰, 蕭 (Author), Kuo, J.-C. (Supervisor), 2018 8月 18學生論文: Master's Thesis
-
-
探討蒙地卡羅法模擬背向式與穿透式背向散射電子繞射顯微鏡的空間解析度
彥慧, 李 (Author), Kuo, J.-C. (Supervisor), 2015 8月 17學生論文: Master's Thesis