每年研究計畫
個人檔案
學歷
- 美國馬里蘭州立大學材料工程系博士
研究專長
- Combinatorial Thin-Film Research Laboratory (CTRL) at NCKU
- High Dielectric Constant (High-K) Material Enhanced Photocatalysis
- Nanostructured Material Fabrication Using Sputtering
- Piezoelectric Probe
- Piezophotocatalysis
經歷
- 1995 ~ 1997 Platoon Officer, National Army of Republic of China
- 2004 ~ 2005 University of Maryland, College Park, MD. Post-doctorate, National Institute of Standards and Technology, Gaithersburg, MD.
- 2005 ~ 2010 National Institute of Standards and Technology (NIST), Gaithersburg, MD.
- 2008 ~ 2009 Process Engineer, Applied Materials, Inc.
- 2009 ~ 2010 Supervisory Committee Member, Taiwanese American Science and Technology Association
- 2010 ~ 2015 Assistant Professor, Department of Materials Science and Engineering, National Cheng Kung University
- 2015 ~ present Associate Professor, Department of Materials Science and Engineering, National Cheng Kung University
- 2016 ~ 2017 General Secretary, Taiwan Association for Coating and Thin Film Technology
指紋 查看啟用 Kao-Shuo Chang 的研究主題。這些主題標籤來自此人的作品。共同形成了獨特的指紋。
- 3 類似的檔案
Chemical analysis
Engineering & Materials Science
thin films
Physics & Astronomy
Photocatalysis
Engineering & Materials Science
Fabrication
Chemical Compounds
Nanorods
Chemical Compounds
Reactive sputtering
Engineering & Materials Science
Thin films
Engineering & Materials Science
Metals
Engineering & Materials Science
網絡
國家層面的近期外部合作。點選圓點深入探索詳細資料。
研究成果 2001 2019
Enhancement of piezo-related properties of AlN through combinatorial AlN–TiN nanocolumn composite composition spread
Lee, H. Y., Lee, S. Y. & Chang, K-S., 2019 十二月 1, 於 : Ceramics International. 45, 17, p. 22744-22751 8 p.研究成果: Article
Composite materials
Chemical analysis
Reactive sputtering
Valence bands
Light absorption
Fabrication and Photodegradation Application of Isopropanol-Functionalized Poly (Triazine Imide)
Chen, C. H. & Chang, K. S., 2019 一月 1, (Accepted/In press) 於 : Journal of Electronic Materials.研究成果: Article
Imides
Triazines
2-Propanol
imides
Photodegradation
1
引文
(Scopus)
Physical, photochemical, and extended piezoelectric studies of orthorhombic ZnSnN 2 nanocolumn arrays
Hsu, A. J. & Chang, K. S., 2019 三月 15, 於 : Applied Surface Science. 470, p. 19-26 8 p.研究成果: Article
Depth profiling
Fluorine
Substrates
Tin oxides
Chemical analysis
3
引文
(Scopus)
Fabrication and Photocatalytic Application of Aromatic Ring Functionalized Melem Oligomers
Hsu, C. Y. & Chang, K. S., 2018 二月 15, 於 : Journal of Physical Chemistry C. 122, 6, p. 3506-3512 7 p.研究成果: Article
oligomers
Oligomers
Fabrication
fabrication
rings
Fabrication of Ba 1−x ZnO 2 nanowires using solvothermal synthesis: Piezotronic and piezophototronic performance characterization
Chiang, Y. C. & Chang, K. S., 2018 七月 1, 於 : Applied Surface Science. 445, p. 71-76 6 p.研究成果: Article
Nanowires
Fabrication
Modulation
Impurities
Substrates
論文
BiFeO3/ITO Fabrication Using Hydrothermal Synthesis and Its Piezophotocatalytic and Photoelectrochemical Applications
作者: 佳臻, 吳., 2016 八月 26監督員: Chang, K. (Supervisor)
學生論文: Master's Thesis
Charge Carrier Transport Characterization of Photocatalytic TiO2-Y2O3 Nanorod Composite Arrays
作者: 之磊, 羅., 2016 九月 2監督員: Chang, K. (Supervisor)
學生論文: Master's Thesis
Enhancement of Photocatalytic and Piezo-related Properties of Orthorhombic ZnSnN2 Grown on FTO Through Morphology Control Using Combinatorial Magnetron Sputtering
作者: 桉榤, 許., 2017 八月 18監督員: Chang, K. (Supervisor)
學生論文: Master's Thesis
Exploration of the Piezo-photocatalytic Effect of Nano-structured ZnSnO3 Using Hydrothermal Synthesis
作者: 名凱, 羅., 2014 八月 5監督員: Chang, K. (Supervisor)
學生論文: Master's Thesis
Fabrication and Applications of Nanostructured Cuprite (Cu2O) Using a Two-Step Hydrothermal Method
作者: 浩文, 吳., 2014 八月 6監督員: Chang, K. (Supervisor)
學生論文: Master's Thesis