Kuo-Shen Chen

2022

Ball bearing multiple failure diagnosis using feature-selected autoencoder model

Cheng, R. C. & Chen, K. S., 2022 6月, 於: International Journal of Advanced Manufacturing Technology. 120, 7-8, p. 4803-4819 17 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Evaluation of transducer signature selections on machine learning performance in cutting tool wear prognosis

Sun, I. C., Cheng, R. C. & Chen, K. S., 2022 4月, 於: International Journal of Advanced Manufacturing Technology. 119, 9-10, p. 6451-6468 18 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

2021

Development and demonstration of indoor three-dimensional localization using IR CMOS sensors for Mobile manipulators

Li, T. H., Chen, K. S. & Vechet, S., 2021 2月 1, 於: Sensors and Actuators, A: Physical. 318, 112497.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Realization and performance evaluation of a machine tool vibration monitoring module by multiple MEMS accelerometer integrations

Tsai, J. M., Sun, I. C. & Chen, K. S., 2021 5月, 於: International Journal of Advanced Manufacturing Technology. 114, 1-2, p. 465-479 15 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Stress Analysis and Characterization of PECVD Oxide/Nitride Multi-Layered Films after Thermal Cycling

Chen, K. S., Tsai, Y. G. & Yang, T. H., 2021 3月, 於: IEEE Transactions on Device and Materials Reliability. 21, 1, p. 17-25 9 p., 5.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

有限元素分析於撓性長距離移動系統之輸入修正設計與應用

Chen, W. & Chen, K. S., 2021 2月, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 42, 1, p. 1-10 10 p.

研究成果: Article › 同行評審

2020

Characterization and Image-Based Performance Evaluation on the Longevity of LCDs under High Temperature and Humid Environment

Chang, Y. K., Chen, K. S. & Chen, C. C., 2020 3月, 於: IEEE Transactions on Device and Materials Reliability. 20, 1, p. 42-50 9 p., 8922749.

研究成果: Article › 同行評審

Crafting interior holes on chemically strengthened thin glass based on ultrafast laser ablation and thermo-shock crack propagations

Chuang, C. F., Chen, K. S., Chiu, T. C., Yang, T. S. & Lin, M. C., 2020 1月 1, 於: Sensors and Actuators, A: Physical. 301, 111723.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Reconstituted Wafer Deformation Analysis through Whole Process Emulation

Yang, C. Y., Chen, K. S. & Yang, T. S., 2020 3月, 於: IEEE Transactions on Device and Materials Reliability. 20, 1, p. 172-180 9 p., 8994086.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

2019

Realization and performance assessment of a force-sensing based smart floor panel for indoor localization applications

Cheng, C. H., Wu, M. F., Guo, S. H. & Chen, K. S., 2019 1月 1, 於: Sensors and Actuators, A: Physical. 285, p. 468-481 14 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

結合Wiimote與紅外光LED陣列之室內定位系統與其在機器人路徑規劃之應用

Fu, Y. T. & Chen, K. S., 2019 2月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 40, 1, p. 21-31 11 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2018

Thermo-mechanical analysis of laser peeling of ultrathin glass for removing edge flaws in web processing applications

Chen, K. S., Yang, T. S., Hong, R. C., Chiu, T. C. & Lin, M. C., 2018 1月 1, 於: Microsystem Technologies. 24, 1, p. 397-409 13 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

2017

Buckling and Postbuckling Failure Analyses on a Rectangular Membrane for Touch Panel Applications

Chuang, C. H., Chang, Y. K., Chen, K. S. & Chen, C. C., 2017 3月, 於: IEEE Transactions on Device and Materials Reliability. 17, 1, p. 204-212 9 p., 7812653.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2016

Analysis, design, and control of a novel elastomeric bearing positioning stage

Teng, Y. C. & Chen, K. S., 2016 9月, 於: Inventions. 1, 3, 17.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Design, analysis, and experimental studies of a novel PVDF-based piezoelectric energy harvester with beating mechanisms

Huang, H. H. & Chen, K. S., 2016 2月 1, 於: Sensors and Actuators, A: Physical. 238, p. 317-328 12 p.

研究成果: Article › 同行評審

37 引文斯高帕斯（Scopus）

Design and control of a cascaded piezoelectric actuated two-degrees-of-freedom positioning compliant stage

Lee, J. W., Li, Y. C., Chen, K. S. & Liu, Y. H., 2016 7月 1, 於: Precision Engineering. 45, p. 374-386 13 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

Developing Electromechanical Coupling Macro Models for Dynamic Responses of MEMS Structures with Command Shaping Techniques

Ou, K. S. & Chen, K. S., 2016 6月, 於: IEEE Transactions on Device and Materials Reliability. 16, 2, p. 123-131 9 p., 7423750.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

On the mechanics of laser peeling for ultra-thin glasses

Chiu, T. C., Hua, C. A., Wang, C. H., Chen, K. S., Yang, T. S., Wen, C. D., Li, C. H., Lin, M. C., Huang, C. J. & Chen, K. T., 2016 9月 1, 於: Engineering Fracture Mechanics. 163, p. 236-247 12 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

On the Stiffness of Elastomer Bearings for Precision Machine Design

Chen, K. S. & Hong, R. C., 2016 12月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 37, 6, p. 533-546 14 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2015

Design and performance evaluation of wiimote-based two-dimensional indoor localization systems for indoor mobile robot control

Gu, D. & Chen, K. S., 2015 4月, 於: Measurement: Journal of the International Measurement Confederation. 66, p. 95-108 14 p.

研究成果: Article › 同行評審

14 引文斯高帕斯（Scopus）

Modeling of chemical mechanical polishing processes by cellular automata and finite element/matlab integration methods

Chen, K. S., Wu, S. L. & Yeh, H. M., 2015 9月 21, 於: Microsystem Technologies. 21, 9, p. 1879-1892 14 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2014

A strain-sensing based scheme for indoor localization: Analysis, algorithm, and demonstration

Pi, C. H. & Chen, K. S., 2014 5月, 於: Measurement: Journal of the International Measurement Confederation. 51, 1, p. 224-235 12 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Design and vibration control of a notch-based compliant stage for display panel inspection applications

Wang, W. C., Lee, J. W., Chen, K. S. & Liu, Y. H., 2014 5月 12, 於: Journal of Sound and Vibration. 333, 10, p. 2701-2718 18 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

IR indoor localization and motion control in smart living space applications based on wiimote technology: A preliminary demonstration

Chen, B. W., Gu, D., Ou, K. S. & Chen, K. S., 2014 6月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 35, 3, p. 187-196 10 p.

研究成果: Article › 同行評審

Nanoindentation fracture and fatigue characterization of PECVD silicon nitride films subjected to rapid thermal annealing

Huang, Z. K. & Chen, K. S., 2014 3月 1, 於: Sensors and Actuators, A: Physical. 207, p. 49-60 12 p.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Pull-in voltage estimation of microcantilever beams with effects of residual stress gradients and capacitance fringing

Ou, K. S. & Chen, K. S., 2014 3月, 於: IEEE Transactions on Device and Materials Reliability. 14, 1, p. 577-579 3 p., 6587523.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

2013

Design, analysis, and control of a cascaded piezoelectric actuated two-degrees-of-freedom precision stage

Li, J. W., Chen, K. S. & Liu, Y. H., 2013, 於: International Journal of Earth Sciences and Engineering. 6, 4, p. 856-861 6 p.

研究成果: Article › 同行評審

Navigation method for autonomous robots in a dynamic indoor environment

Věchet, S., Chen, K. S. & Krejsa, J., 2013, 於: International Journal of Automation and Smart Technology. 3, 4, p. 273-277 5 p.

研究成果: Article › 同行評審

Residual vibration suppression of crane movement by input shaping: Experimental investigation and finite element dynamics simulations

Dai, C. X. & Chen, K. S., 2013 12月, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 34, 6, p. 497-506 10 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2012

A one-dimensional touch panel based on strain sensing

Pi, C. H., Tsai, I. F., Ou, K. S. & Chen, K. S., 2012 9月, 於: Mechatronics. 22, 6, p. 802-810 9 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Development of navigation schemes for grouped mobile robots leading to biomimetic applications

Chen, M. H., Fu, Y. T., Ou, K. S. & Chen, K. S., 2012, 於: International Journal of Automation and Smart Technology. 2, 1, p. 29-41 13 p.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Performance evaluation of drift-free integration for navigation and velocity feedback applications

Lin, W. C., Dai, C. X., Deng, D. L., Ou, K. S. & Chen, K. S., 2012 9月, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A. 35, 6, p. 767-778 12 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Residual vibration suppression of crane movement by input shaping: Experimental investigation and finite element dynamics simulations

Dai, C. X. & Chen, K. S., 2012 12月, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 33, 6, p. 477-486 10 p.

研究成果: Article › 同行評審

2011

A novel semianalytical approach for finding pull-in voltages of micro cantilever beams subjected to electrostatic loads and residual stress gradients

Ou, K. S., Chen, K. S., Yang, T. S. & Lee, S. Y., 2011 4月, 於: Journal of Microelectromechanical Systems. 20, 2, p. 527-537 11 p., 5704539.

研究成果: Article › 同行評審

27 引文斯高帕斯（Scopus）

Fast positioning and impact minimizing of MEMS devices by suppression of motion-induced vibration by command-shaping method

Ou, K. S., Chen, K. S., Yang, T. S. & Lee, S. Y., 2011 2月, 於: Journal of Microelectromechanical Systems. 20, 1, p. 128-139 12 p., 5682000.

研究成果: Article › 同行評審

19 引文斯高帕斯（Scopus）

Mechanical property characterization of sputtered and plasma enhanced chemical deposition (PECVD) silicon nitride films after rapid thermal annealing

Wu, P. H., Lin, I. K., Yan, H. Y., Ou, K. S., Chen, K. S. & Zhang, X., 2011 7月, 於: Sensors and Actuators, A: Physical. 168, 1, p. 117-126 10 p.

研究成果: Article › 同行評審

31 引文斯高帕斯（Scopus）

On the influence of roller misalignments on the web behavior during roll-to-roll processing

Chena, K. S., Ou, K. S. & Liao, Y. M., 2011 1月, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A. 34, 1, p. 87-97 11 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Synergetic effects of wafer rigidity and retaining-ring parameters on contact stress uniformity in chemical mechanical planarization

Hu, I., Yang, T. S. & Chen, K. S., 2011 9月, 於: International Journal of Advanced Manufacturing Technology. 56, 5-8, p. 523-538 16 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

2010

Development of a pad conditioning simulation module with a diamond dresser for CMP applications

Yeh, H. M. & Chen, K. S., 2010 9月, 於: International Journal of Advanced Manufacturing Technology. 50, 1-4, p. 1-12 12 p.

研究成果: Article › 同行評審

42 引文斯高帕斯（Scopus）

Simulations and experimental investigations on residual vibration suppression of electromagnetically actuated structures using command shaping methods

Chen, K. S. & Ou, K. S., 2010 10月, 於: JVC/Journal of Vibration and Control. 16, 11, p. 1713-1734 22 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

2009

A command shaping approach to enhance the dynamic performance and longevity of contact switches

Ou, K. S., Chen, K. S., Yang, T. S. & Lee, S. Y., 2009 4月, 於: Mechatronics. 19, 3, p. 375-389 15 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

Design of command shapers for residual vibration suppression in Duffing nonlinear systems

Chen, K. S., Yang, T. S., Ou, K. S. & Yin, J. F., 2009 3月, 於: Mechatronics. 19, 2, p. 184-198 15 p.

研究成果: Article › 同行評審

19 引文斯高帕斯（Scopus）

Development of a digital-convolution-based process emulator for three-dimensional microstructure fabrication using electron-beam lithography

Yeh, H. M. & Chen, K. S., 2009, 於: IEEE Transactions on Industrial Electronics. 56, 4, p. 926-936 11 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Effects of retaining ring on contact stress uniformity in chemical mechanical planarization

Yang, T. S., Hu, I., Chen, K. S., Liu, C. L. & Wang, Y. C., 2009 10月, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 30, 5, p. 381-392 12 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Finite-element analysis on wafer-level CMP contact stress: Reinvestigated issues and the effects of selected process parameters

Chen, K. S., Yeh, H. M., Yan, J. L. & Chen, Y. T., 2009 6月, 於: International Journal of Advanced Manufacturing Technology. 42, 11-12, p. 1118-1130 13 p.

研究成果: Article › 同行評審

43 引文斯高帕斯（Scopus）

Viscoelastic characterization and modeling of polymer transducers for biological applications

Lin, I. K., Ou, K. S., Liao, Y. M., Liu, Y., Chen, K. S. & Zhang, X., 2009, 於: Journal of Microelectromechanical Systems. 18, 5, p. 1087-1099 13 p.

研究成果: Article › 同行評審

73 引文斯高帕斯（Scopus）

2008

Development of geometrically based fabrication emulator for MEMS micromachining and excimer laser ablation

Chen, K. S. & Yeh, H. M., 2008, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 31, 1, p. 41-51 11 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Development of semi-empirical formulation for extracting materials properties from nanoindentation measurements: Residual stresses, substrate effect, and creep

Chen, K. S., Chen, T. C. & Ou, K. S., 2008 2月 29, 於: Thin Solid Films. 516, 8, p. 1931-1940 10 p.

研究成果: Article › 同行評審

55 引文斯高帕斯（Scopus）

Mechanical characterization of KMPR by nano-indentation for MEMS applications

Ou, K. S., Yan, H. Y. & Chen, K. S., 2008 6月, 於: Strain. 44, 3, p. 267-271 5 p.

研究成果: Article › 同行評審

17 引文斯高帕斯（Scopus）

Mechanical properties measurement of PECVD silicon nitride after rapid thermal annealing using nanoindentation technique

Yan, H. Y., Ou, K. S. & Chen, K. S., 2008 6月, 於: Strain. 44, 3, p. 259-266 8 p.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

陳 國聲

研究成果

搜尋結果

陳國聲