Mi-Ching Tsai

2023

Influence of Wobble-Based Scanning Strategy on Surface Morphology of Laser Powder Bed-Fabricated Permalloy

Huang, T. Y., Cheng, C. W., Lee, A. C., Chang, T. W. & Tsai, M. C., 2023 3月, 於: Materials. 16, 5, 2062.

研究成果: Article › 同行評審

開啟存取

2022

Acceleration-based FIR filters for trajectory interpolation with different kinematic constraints and target velocities for NC systems

Huang, R. Y., Cheng, C. W., Tsai, M. C. & Lee, A. C., 2022 7月, 於: Control Engineering Practice. 124, 105204.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion

Yu, K. S., Cheng, C. W., Lee, A. C., Jhang Jian, W. Y., Chang, W. C., Chang, T. W. & Tsai, M. C., 2022 2月, 於: Optics and Laser Technology. 146, 107604.

研究成果: Article › 同行評審

Deep Learning Applied to Defect Detection in Powder Spreading Process of Magnetic Material Additive Manufacturing

Chen, H. Y., Lin, C. C., Horng, M. H., Chang, L. K., Hsu, J. H., Chang, T. W., Hung, J. C., Lee, R. M. & Tsai, M. C., 2022 8月, 於: Materials. 15, 16, 5662.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Development of a Dual-Input Magnetic Gear Train for the Transmission System of Small-Scale Wind Turbines

Wu, Y. C., Ou, F. M., Tsai, M. C. & Fajri, S. N., 2022 4月 1, 於: Applied Sciences (Switzerland). 12, 7, 3685.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Fabrication of crack-free Nd-Fe-B magnets with laser powder bed fusion

Jian, W. Y. J., Cheng, C. W., Chang, W. C., Huang, T. Y., Liang, Y. C., Lee, A. C., Chang, T. W. & Tsai, M. C., 2022 3月, 於: Materialia. 21, 101351.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Fabrication of Non-Contact Magnetic Screws by Additive Manufacturing

Chang, T. W., Huang, P. W., Kung, S. H., Shih, C. H., Tsai, M. C., Ubadigha, C. U., Chang, W. C. & Huang, C. C., 2022 8月 1, 於: IEEE Transactions on Magnetics. 58, 8, 8001805.

研究成果: Article › 同行評審

Novel diagonal scanning strategy for the laser powder bed fusion process

Huang, R. Y., Lin, M. H., Lai, R. S., Cheng, C. W., Tsai, M. C. & Lee, A. C., 2022 8月, 於: International Journal of Advanced Manufacturing Technology. 121, 11-12, p. 7949-7961 13 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Tiny Piezoelectric Multi-Layered Actuators with Application in a Compact Camera Module—Design, Fabrication, Assembling and Testing Issues

Lee, C. P., Tsai, M. C. & Fuh, Y. K., 2022 12月, 於: Micromachines. 13, 12, 2126.

研究成果: Article › 同行評審

開啟存取

2021

Advanced Application of Centralized Control for a Scanning Mirror System Based on EtherCAT Fieldbus

Huang, R. Y., Chen, Y. J., Chen, Y. X., Cheng, C. W., Tsai, M. C. & Lee, A. C., 2021, (Accepted/In press) 於: International Journal of Control, Automation and Systems.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Application of Magnetic Metal 3-D Printing on the Integration of Axial-Flow Impeller Fan Motor Design

Wu, S. T., Huang, P. W., Chang, T. W., Jiang, I. H. & Tsai, M. C., 2021 2月, 於: IEEE Transactions on Magnetics. 57, 2, 9163169.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Cu₃Si enhanced crystallinity and dopamine derived nitrogen doping into carbon coated micron-sized Si/Cu₃Si as anode material in lithium-ion batteries

Wu, Y. H., Huang, J. L., Hou, S. C., Tsai, M. C. & Chang, C. C., 2021 8月 10, 於: Electrochimica Acta. 387, 138495.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Improved haptic transparency of bilateral control using torque-measured magnetic coupling

Tu, T. K., Tsai, I. H., Yen, J. Y., Tsao, T. C. & Tsai, M. C., 2021, 於: Machines. 9, 8, 172.

研究成果: Article › 同行評審

開啟存取

Predicting magnetic characteristics of additive manufactured soft magnetic composites by machine learning

Chang, T. W., Liao, K. W., Lin, C. C., Tsai, M. C. & Cheng, C. W., 2021 6月, 於: International Journal of Advanced Manufacturing Technology. 114, 9-10, p. 3177-3184 8 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

Robust scalar control of synchronous reluctance motor with optimal efficiency by MTPA control

Cheng, L. J. & Tsai, M. C., 2021, 於: IEEE Access. 9, p. 32599-32612 14 p., 3060436.

研究成果: Article › 同行評審

開啟存取

13 引文斯高帕斯（Scopus）

The analysis and design of a high efficiency piezoelectric harvesting floor with impacting force mechanism

Wang, S. H., Tsai, M. C. & Wu, T. H., 2021 4月, 於: Crystals. 11, 4, 380.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

2020

Analysis of Integrated Magnetic Gear Motor with Dual Mechanical Output Port: A Block Diagram Approach

Ubadigha, C. U. & Tsai, M. C., 2020 9月, 於: IEEE Transactions on Energy Conversion. 35, 3, p. 1301-1308 8 p., 9072530.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Demagnetization fault diagnosis of a PMSM using auto-encoder and k-means clustering

Chang, L. K., Wang, S. H. & Tsai, M. C., 2020 9月, 於: Energies. 13, 17, en13174467.

研究成果: Article › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Design and implementation of position-based repetitive control torque observer for cogging torque compensation in PMSM

Wu, C. J., Tsai, M. C. & Cheng, L. J., 2020 1月 1, 於: Applied Sciences (Switzerland). 10, 1, 96.

研究成果: Article › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Enhanced Model Predictive Direct Torque Control Applied to IPM Motor with Online Parameter Adaptation

Cheng, L. J. & Tsai, M. C., 2020, 於: IEEE Access. 8, p. 42185-42199 15 p., 9018213.

研究成果: Article › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

Laser powder bed fusion of multilayer thin-walled structures based on data-driven model

Lee, A. C., Huang, R. Y., Nguyen, T. D., Cheng, C. W. & Tsai, M. C., 2020 6月 1, 於: Journal of Laser Micro Nanoengineering. 15, 1, p. 38-44 7 p.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Long short-term memory approach to estimate battery remaining useful life using partial data

Chinomona, B., Chung, C., Chang, L. K., Su, W. C. & Tsai, M. C., 2020, 於: IEEE Access. 8, p. 165419-165431 13 p.

研究成果: Article › 同行評審

開啟存取

42 引文斯高帕斯（Scopus）

2019

Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

Jhong, K. J., Chang, T. W., Lee, W. H., Tsai, M. C. & Jiang, I. H., 2019 3月 1, 於: AIP Advances. 9, 3, 035317.

研究成果: Article › 同行評審

開啟存取

11 引文斯高帕斯（Scopus）

New Hybrid Stator Design for High-Speed PMSMS Based on Selective Laser Melting of 3-D Printing

Huang, P. W., Jiang, I. H., Tsai, M. C. & Chen, G. M., 2019 7月, 於: IEEE Transactions on Magnetics. 55, 7, 8671524.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Single track of selective laser melting process: Modeling and experimental comparison

Cheng, C. W., Liou, Y. W., Lee, A. C. & Tsai, M. C., 2019, 於: Journal of Laser Micro Nanoengineering. 14, 2, p. 138-141 4 p.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Synchronized multi-spot scanning strategies for the laser powder bed fusion process

Tsai, C. Y., Cheng, C. W., Lee, A. C. & Tsai, M. C., 2019 5月, 於: Additive Manufacturing. 27, p. 1-7 7 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

2018

3-D Structure Line-Start Synchronous Reluctance Motor Design Based on Selective Laser Melting of 3-D Printing

Huang, P. W., Tsai, M. C. & Jiang, I. H., 2018 11月, 於: IEEE Transactions on Magnetics. 54, 11, 8410946.

研究成果: Article › 同行評審

14 引文斯高帕斯（Scopus）

Dynamic switching of two degree-of-freedom control for belt-driven servomechanism

Chen, C. L. & Tsai, M. C., 2018, 於: IEEE Access. 6, p. 77849-77858 10 p., 8554269.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

H∞ control design of PID-Like controller for speed drive systems

Ko, P. J. & Tsai, M. C., 2018 6月 28, 於: IEEE Access. 6, p. 36711-36722 12 p.

研究成果: Article › 同行評審

開啟存取

13 引文斯高帕斯（Scopus）

Kinematic and Dynamic Analysis of Magnetic Gear with Dual-Mechanical Port Using Block Diagrams

Chen, C. L. & Tsai, M. C., 2018 11月, 於: IEEE Transactions on Magnetics. 54, 11, 8403910.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Stimulation Interval Evaluation for Lower-Limb Cycling Movement Based on Torque Observer

Hsueh, P. W., Tsai, M. C. & Chen, C. L., 2018 11月, 於: Asian Journal of Control. 20, 6, p. 2318-2330 13 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Wire tension control of an automatic motor winding machine—an iterative learning sliding mode control approach

Lu, J. S., Cheng, M. Y., Su, K. H. & Tsai, M. C., 2018 4月, 於: Robotics and Computer-Integrated Manufacturing. 50, p. 50-62 13 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

2017

Modulating Ring Structural Configuration Influence on the Dual Air-Gap Magnetic Gear Electric Machine

Ubadigha, C. U., Tsai, M. C. & Hsieh, M. F., 2017 11月, 於: IEEE Transactions on Magnetics. 53, 11, 7954689.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

On-line condition monitoring of servo motor drive systems by HHT in Industry 4.0

Tsai, M. C. & Ko, P. J., 2017 10月 3, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A. 40, 7, p. 572-584 13 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

2016

Density characteristics of laser-sintered three-dimensional printing parts investigated by using an integrated finite element analysis-based evolutionary algorithm approach

Vijayaraghavan, V., Garg, A., Wong, C. H., Tai, K., Regalla, S. P. & Tsai, M. C., 2016 1月, 於: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 230, 1, p. 100-110 11 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Design of single-phase driven screw-thread-type ultrasonic motor

Chang, L. K. & Tsai, M. C., 2016 5月 1, 於: Review of Scientific Instruments. 87, 5, 055002.

研究成果: Article › 同行評審

25 引文斯高帕斯（Scopus）

2015

3-D Printing-Based Design of Axial Flux Magnetic Gear for High Torque Density

Tsai, M. C. & Ku, L. H., 2015 11月 1, 於: IEEE Transactions on Magnetics. 51, 11, 7114312.

研究成果: Article › 同行評審

23 引文斯高帕斯（Scopus）

Actuator Design Based on Flux Path Switching for High Energy Utilization

Huang, P. W. & Tsai, M. C., 2015 11月 1, 於: IEEE Transactions on Magnetics. 51, 11, 7114282.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Impact of Electrical Steel Punching Process on the Performance of Switched Reluctance Motors

Chiang, C. C., Hsieh, M. F., Li, Y. H. & Tsai, M. C., 2015 11月 1, 於: IEEE Transactions on Magnetics. 51, 11, 7132755.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Improved Accuracy for Performance Evaluation of Synchronous Reluctance Motor

Lin, I. H., Hsieh, M. F., Kuo, H. F. & Tsai, M. C., 2015 11月 1, 於: IEEE Transactions on Magnetics. 51, 11, 7137637.

研究成果: Article › 同行評審

22 引文斯高帕斯（Scopus）

Numerical study on electromagnetics and thermal cooling of a switched reluctance motor

Jang, J. H., Chiu, H. C., Yan, W. M., Tsai, M. C. & Wang, P. Y., 2015 5月 26, 於: Case Studies in Thermal Engineering. 6, p. 16-27 12 p.

研究成果: Article › 同行評審

開啟存取

34 引文斯高帕斯（Scopus）

2014

Characteristics measurement of electric motors by contactless eddy-current magnetic coupler

Tsai, M. C., Chiou, K. Y., Wang, S. H. & Lin, C. K., 2014 11月 1, 於: IEEE Transactions on Magnetics. 50, 11, 6971639.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

Design of star-shaped flextensional stator for ultrasonic motor

Chang, L. K. & Tsai, M. C., 2014, 於: Advances in Mechanical Engineering. 2014, 162535.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Effects of annealing on magnetic properties of electrical steel and performances of SRM after punching

Chiang, C. C., Knight, A. M., Hsieh, M. F., Tsai, M. G., Liu, B. H., Chen, I. G., Gaing, Z. L. & Tsai, M. C., 2014 11月 1, 於: IEEE Transactions on Magnetics. 50, 11, 6971254.

研究成果: Article › 同行評審

26 引文斯高帕斯（Scopus）

Novel stator design of double salient permanent magnet motor

Tai, W. H., Tsai, M. C., Gaing, Z. L., Huang, P. W. & Hsu, Y. S., 2014 4月 1, 於: IEEE Transactions on Magnetics. 50, 4, 6786457.

研究成果: Article › 同行評審

31 引文斯高帕斯（Scopus）

Rigorous design and optimization of brushless PM motor using response surface methodology with quantum-behaved PSO operator

Gaing, Z. L., Lin, C. H., Tsai, M. H., Hsieh, M. F. & Tsai, M. C., 2014 1月, 於: IEEE Transactions on Magnetics. 50, 1, 2279672.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

2013

Force sensorless control of power-assisted wheelchair based on motion coordinate transformation

Tsai, M. C. & Hsueh, P. W., 2013 12月, 於: Mechatronics. 23, 8, p. 1014-1024 11 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Implementation and analysis of noncontact acoustic tweezers using quasi-standing waves

Wang, S. H. & Tsai, M. C., 2013, 於: IEEE/ASME Transactions on Mechatronics. 18, 3, p. 1019-1026 8 p., 6197722.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Implementation of repetitive controller for rejection of position-based periodic disturbances

Yao, W. S., Tsai, M-C. & Yamamoto, Y., 2013 9月 1, 於: Control Engineering Practice. 21, 9, p. 1226-1237 12 p.

研究成果: Article › 同行評審

25 引文斯高帕斯（Scopus）

Investigation of V-shaped line start permanent magnet motors based on reactance effect

Huang, P. W. & Tsai, M. C., 2013, 於: IEEE Transactions on Magnetics. 49, 5, p. 2311-2314 4 p., 6514619.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

蔡 明祺

研究成果

搜尋結果

蔡明祺