Ru-Min Chao

查看斯高帕斯 (Scopus) 概要

電話886 6 2757575 ext 63501
電子郵件rmchaomail.ncku.edutw
網站http://myweb.ncku.edu.tw/~rmchao/

h-index

每年研究成果

22 Article
13 Conference contribution
8 Patent
1 Conference article

22結果

篩選

2020
使用長短時記憶人工智慧方法預估極短時分散式太陽能系統發電成效
Chao, R. M. & Chin, T. H., 2020, 於: Journal of Taiwan Society of Naval Architects and Marine Engineers. 39, 4, p. 197-204 8 p.
研究成果: Article › 同行評審
2018
Evaluation of a distributed photovoltaic system in grid-connected and standalone applications by different MPPT algorithms
Chao, R. M., Ko, S. H., Lin, H. K. & Wang, I. K., 2018 6月, 於: Energies. 11, 6, p. 121693718 1 p., 1484.
研究成果: Article › 同行評審

開啟存取
15 引文斯高帕斯（Scopus）
2016
Multicore PSO Operation for Maximum Power Point Tracking of a Distributed Photovoltaic System under Partially Shading Condition
Chao, R. M., Nasirudin, A., Wang, I. K. & Chen, P. L., 2016, 於: International Journal of Photoenergy. 2016, 9754514.
研究成果: Article › 同行評審

開啟存取
20 引文斯高帕斯（Scopus）
2012
Design and fabrication of single-walled carbon nanonet flexible strain sensors
Huang, Y. T., Huang, S. C., Hsu, C. C., Chao, R. M. & Vu, T. K., 2012 3月, 於: Sensors. 12, 3, p. 3269-3280 12 p.
研究成果: Article › 同行評審

開啟存取
17 引文斯高帕斯（Scopus）
Photovoltaic dynamic MPPT on a moving vehicle
Ko, S. H. & Chao, R. M., 2012 6月, 於: Solar Energy. 86, 6, p. 1750-1760 11 p.
研究成果: Article › 同行評審
38 引文斯高帕斯（Scopus）
2011
A simplified signal analysis algorithm for the development of a low cost underwater echo-sounder
Lou, S. C., Chao, R. M., Ko, S. H., Lin, K. M. & Zhong, J. X., 2011 11月, 於: Measurement: Journal of the International Measurement Confederation. 44, 9, p. 1572-1581 10 p.
研究成果: Article › 同行評審
2 引文斯高帕斯（Scopus）
Evaluation of the gauge factor for single-walled carbon nanonets on the flexible plastic substrates by nano-transfer-printing
Hsu, C. C., Chao, R. M., Liu, C. W. & Liang, S. Y., 2011 7月, 於: Journal of Micromechanics and Microengineering. 21, 7, 075012.
研究成果: Article › 同行評審
8 引文斯高帕斯（Scopus）
Performance evaluation of parabolic prediction to maximum power point tracking for PV array
Pai, F. S., Chao, R. M., Ko, S. H. & Lee, T. S., 2011 1月 1, 於: IEEE Transactions on Sustainable Energy. 2, 1, p. 60-68 9 p., 5585793.
研究成果: Article › 同行評審

73 引文斯高帕斯（Scopus）
2010
A new algorithm to photovoltaic power point tracking problems with Quadratic maximization
Pai, F. S. & Chao, R. M., 2010 3月, 於: IEEE Transactions on Energy Conversion. 25, 1, p. 262-264 3 p., 5340544.
研究成果: Article › 同行評審
38 引文斯高帕斯（Scopus）
2009
Evaluation of a photovoltaic energy mechatronics system with a built-in quadratic maximum power point tracking algorithm
Chao, R. M., Ko, S. H., Pai, F. S., Lin, I. H. & Chang, C. C., 2009 12月, 於: Solar Energy. 83, 12, p. 2177-2185 9 p.
研究成果: Article › 同行評審
18 引文斯高帕斯（Scopus）
2008
Surface tension/thermal mismatch in a self-assembly process
Chao, R. M., Hsu, C. C. & Chu, F. I., 2008 11月 1, 於: Journal of Micromechanics and Microengineering. 18, 11, 115002.
研究成果: Article › 同行評審
2 引文斯高帕斯（Scopus）
2004
Angular vertical comb-driven tunable capacitor with high-tuning capabilities
Nguyen, H. D., Hah, D., Patterson, P. R., Chao, R., Piyawattanametha, W., Lau, E. K. & Wu, M. C., 2004 6月, 於: Journal of Microelectromechanical Systems. 13, 3, p. 406-413 8 p.
研究成果: Article › 同行評審
65 引文斯高帕斯（Scopus）
Structural analysis based on multiresolution blind system identification algorithm
Too, G. P. J., Wang, C. C. K. & Chao, R., 2004 6月, 於: Structural Engineering and Mechanics. 17, 6, p. 819-828 10 p.
研究成果: Article › 同行評審
2002
A scanning micromirror with angular comb drive actuation
Patterson, P. R., Hah, D., Nguyen, H., Toshiyoshi, H., Chao, R. M. & Wu, M. C., 2002, 於: Proceedings of the IEEE Micro Electro Mechanical Systems (MEMS). p. 544-547 4 p.
研究成果: Article › 同行評審
101 引文斯高帕斯（Scopus）
2001
Determining the unknown traction of a cracked elastic body using the inverse technique with the dual boundary element method
Chao, R. M., Chen, Y. J. & Lin, F. C., 2001 12月 1, 於: CMES - Computer Modeling in Engineering and Sciences. 2, 1, p. 73-85 13 p.
研究成果: Article › 同行評審
9 引文斯高帕斯（Scopus）
1999
An H-adaptive refinement BEM procedure using modified sample point error analysis in two-dimensional elastic problems
Chao, R. M. & Lee, S. Y., 1999, 於: Advances in Engineering Software. 30, 4, p. 227-242 16 p.
研究成果: Article › 同行評審
2 引文斯高帕斯（Scopus）
1998
Arc-shaped debonding crack opened by internal pressure
Chao, R. M., 1998, 於: Chinese Journal of Mechanics Series A (English Edition). 14, 2, p. 83-89 7 p.
研究成果: Article › 同行評審

開啟存取
1997
Interfacial toughness for the shipboard aluminum/steel structural transition joint
Chao, R. M., Yang, J. M. & Lay, S. R., 1997 6月, 於: Marine Structures. 10, 5, p. 353-362 10 p.
研究成果: Article › 同行評審
25 引文斯高帕斯（Scopus）
The fiber-matrix interface crack
Chao, R. & Laws, N., 1997 12月, 於: Journal of Applied Mechanics, Transactions ASME. 64, 4, p. 992-999 8 p.
研究成果: Article › 同行評審
13 引文斯高帕斯（Scopus）
1996
Boundary element method for the frictionless arc-shaped crack closure problem
Chao, R. M. & Chang, C. H., 1996 4月, 於: Engineering Analysis with Boundary Elements. 17, 3, p. 245-252 8 p.
研究成果: Article › 同行評審
1 引文斯高帕斯（Scopus）
1995
Frictional contact of an arc crack in an isotropic homogeneous material due to uniaxial loading
Chao, R. M. & Rau, M. Y., 1995 1月, 於: Engineering Fracture Mechanics. 50, 1, p. 121-130 10 p.
研究成果: Article › 同行評審
5 引文斯高帕斯（Scopus）
1994

Potential functions of an edge dislocation associated with a circular inclusion
Chao, R. M., 1994 3月, 於: Journal of Applied Mechanics, Transactions ASME. 61, 1, p. 217-219 3 p.
研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

趙 儒民

研究成果

搜尋結果

趙儒民