楊 大和

研究成果

每年研究成果 1994 2002 2004 2005 2007 2008 2011 2012 2015 2022

• 83 Article
• 7 Conference contribution
• 6 Paper
• 2 Review article
• 3 更多
  • 1 Chapter
  • 1 Conference article
  • 1 Editorial

每年研究成果

每年研究成果

搜尋結果

• 2022

  A simulation study on CONWIP system design for bicycle chain manufacturing

  Hung, Y. H., Huang, K. C. & Yang, T., 2022, 於: European Journal of Industrial Engineering. 16, 1, p. 31-40 10 p.

  研究成果: Article › 同行評審

  • Bicycles 100%
  • Systems analysis 64%
  • Lead 15%

• A Study on the Optimization of In-Process Inspection Procedure for Active Pharmaceutical Ingredients Manufacturing Process

  Yang, T., Lin, S. Y., Hung, Y. H. & Hong, C. C., 2022 3月 1, 於: Sustainability (Switzerland). 14, 6, 3706.

  研究成果: Article › 同行評審

  開啟存取

  • Taguchi methods 100%
  • Drug products 93%
  • pharmaceutical 79%
  • inspection 78%
  • manufacturing 77%

• Optimizing U-Shaped Production Line Balancing Problem with Exchangeable Task Locations and Walking Times

  Kuo, Y., Yang, T. & Huang, T. L., 2022 4月 1, 於: Applied Sciences (Switzerland). 12, 7, 3375.

  研究成果: Article › 同行評審

  開啟存取

  • walking 100%
  • cycles 30%
  • Time 27%
  • programming 17%
  • Integer programming 16%

• Virtual Material Quality Investigation System

  Lee, C. Y., Lin, Y. L., Lin, S. H. & Yang, T., 2022, (Accepted/In press) 於: IEEE Transactions on Engineering Management. p. 1-11 11 p.

  研究成果: Article › 同行評審

  • Predictive analytics 100%
  • Simulation Optimization 91%
  • Budget Allocation 81%
  • Solar cells 79%
  • Optimization Techniques 78%
• 2021

  A study on Shojinka design for automobile engine piston-rod manufacturing

  Wang, P. S., Lin, C. C. & Yang, T., 2021 1月, 於: Computers and Industrial Engineering. 151, 106974.

  研究成果: Article › 同行評審

  • Automobile engines 100%
  • Engine pistons 97%
  • Productivity 24%
  • Personnel 15%
  1 引文 斯高帕斯（Scopus）

• Supply chain information sharing under consideration of bullwhip effect and system robustness

  Tang, L., Yang, T., Tu, Y. & Ma, Y., 2021 6月, 於: Flexible Services and Manufacturing Journal. 33, 2, p. 337-380 44 p.

  研究成果: Article › 同行評審

  • Information Sharing 100%
  • Robustness 81%
  • Bullwhip Effect 79%
  • Supply chains 64%
  • Amplification 48%
  8 引文 斯高帕斯（Scopus）
• 2020

  A lean production system design for semiconductor crystal-ingot pulling manufacturing using hybrid Taguchi method and simulation optimization

  Yang, T., Wen, Y. F., Hsieh, Z. R. & Zhang, J., 2020 5月 12, 於: Assembly Automation. 40, 3, p. 433-445 13 p.

  研究成果: Article › 同行評審

  • Lean production 100%
  • Taguchi methods 87%
  • Ingots 85%
  • Crystals 73%
  • Semiconductor materials 65%
  6 引文 斯高帕斯（Scopus）
• 2018

  Lean-pull strategy for order scheduling problem in a multi-site semiconductor crystal ingot-pulling manufacturing company

  Wang, P. S., Yang, T. & Yu, L. C., 2018 11月, 於: Computers and Industrial Engineering. 125, p. 545-562 18 p.

  研究成果: Article › 同行評審

  • Ingots 100%
  • Crystals 85%
  • Semiconductor materials 76%
  • Scheduling 59%
  • Industry 37%
  16 引文 斯高帕斯（Scopus）

• TFT-LCD module cell layout design using simulation and fuzzy multiple attribute group decision-making approach

  Liu, Y. S., Tang, L. N., Ma, Y. Z. & Yang, T., 2018 7月, 於: Applied Soft Computing Journal. 68, p. 873-888 16 p.

  研究成果: Article › 同行評審

  • Thin film transistors 100%
  • Liquid crystal displays 84%
  • Decision making 56%
  • Lean production 17%
  • Cellular manufacturing 16%
  12 引文 斯高帕斯（Scopus）
• 2017

  Effective layout designs for the Shojinka control problem for a TFT-LCD module assembly line

  Wang, P. S., Yang, T. & Chang, M. C., 2017 7月, 於: Journal of Manufacturing Systems. 44, p. 255-269 15 p.

  研究成果: Article › 同行評審

  • Thin film transistors 100%
  • Liquid crystal displays 84%
  • Integer programming 42%
  • Signal to noise ratio 32%
  • Personnel 29%
  9 引文 斯高帕斯（Scopus）

• Estimation of the Pareto front in stochastic simulation through stochastic Kriging

  Zhang, J., Ma, Y., Yang, T. & Liu, L., 2017 12月, 於: Simulation Modelling Practice and Theory. 79, p. 69-86 18 p.

  研究成果: Article › 同行評審

  • Pareto Front 100%
  • Kriging 90%
  • Stochastic Simulation 86%
  • Operations research 76%
  • Multiobjective optimization 42%
  17 引文 斯高帕斯（Scopus）

• Optimization of Solder Volume in Printed Circuit Board Assembly Through an Operating Window Experiment—A Case Study

  Su, C. T., Hsu, C. C., Yang, T. & Hsu, H. P., 2017 6月 1, 於: Experimental Techniques. 41, 3, p. 309-316 8 p.

  研究成果: Article › 同行評審

  • Printed circuit boards 100%
  • Soldering alloys 98%
  • Printing 27%
  • Costs 16%
  • Networks (circuits) 15%
  1 引文 斯高帕斯（Scopus）
• 2016

  An exploratory study of virtual cell design for thin-film transistor–liquid crystal display (TFT-LCD) array manufacturing

  Yang, T., Kuo, Y., Hsieh, C. H. & Ge, W. C., 2016 3月, 於: International Journal of Advanced Manufacturing Technology. 83, 1-4, p. 633-644 12 p.

  研究成果: Article › 同行評審

  • Crystals 100%
  • Thin films 95%
  • Display devices 77%
  • Cellular manufacturing 51%
  • Production control 25%
  3 引文 斯高帕斯（Scopus）

• Integration of customer and supplier flexibility in a make-to-order industry

  Kuo, Y., Yang, T., Parker, D. & Sung, C. H., 2016 3月 14, 於: Industrial Management and Data Systems. 116, 2, p. 213-235 23 p.

  研究成果: Article › 同行評審

  • Make-to-order 100%
  • Profitability 87%
  • Raw materials 62%
  • Suppliers 58%
  • Mixed Integer Program 44%
  13 引文 斯高帕斯（Scopus）
• 2015

  A multiple attribute group decision making approach for solving problems with the assessment of preference relations

  Yang, T., Kuo, Y., Parker, D. & Chen, K. H., 2015, 於: Mathematical Problems in Engineering. 2015, 849897.

  研究成果: Article › 同行評審

  開啟存取

  • Preference Relation 100%
  • Group Decision Making 97%
  • Attribute 73%
  • Multiple Attribute Decision Making 67%
  • Decision making 55%
  10 引文 斯高帕斯（Scopus）

• Implementing lean standard work to solve a low work-in-process buffer problem in a highly automated manufacturing environment

  Lu, J. C. & Yang, T., 2015 4月 18, 於: International Journal of Production Research. 53, 8, p. 2285-2305 21 p.

  研究成果: Article › 同行評審

  • Automated Manufacturing 100%
  • Buffer 72%
  • Pacemakers 63%
  • Workstation 43%
  • Industrial plants 42%
  19 引文 斯高帕斯（Scopus）

• Lean principles and simulation optimization for emergency department layout design

  Wang, T. K., Yang, T., Yang, C. Y. & Chan, F. T. S., 2015 5月 11, 於: Industrial Management and Data Systems. 115, 4, p. 678-699 22 p.

  研究成果: Article › 同行評審

  • Simulation Optimization 100%
  • Emergency Department 94%
  • Layout 73%
  • Waiting Time 71%
  • Service Levels 69%
  36 引文 斯高帕斯（Scopus）

• Lean production system design for fishing net manufacturing using lean principles and simulation optimization

  Yang, T., Kuo, Y., Su, C. T. & Hou, C. L., 2015 1月 1, 於: Journal of Manufacturing Systems. 34, 1, p. 66-73 8 p.

  研究成果: Article › 同行評審

  • Lean production 100%
  • Systems analysis 55%
  • Pacemakers 33%
  • Design of experiments 23%
  • Industry 10%
  73 引文 斯高帕斯（Scopus）

• The Optimization of Total Laboratory Automation by Simulation of a Pull-Strategy

  Yang, T., Wang, T. K., Li, V. C. & Su, C. L., 2015 1月, 於: Journal of Medical Systems. 39, 1, 162.

  研究成果: Article › 同行評審

  • Automation 43%
  • Physicians 9%
  • Equipment and Supplies 8%
  • Scheduling 5%
  16 引文 斯高帕斯（Scopus）
• 2014

  Improving the reliability of electronic paper display using FMEA and Taguchi methods: A case study

  Su, C. T., Lin, H. C., Teng, P. W. & Yang, T., 2014, 於: Microelectronics Reliability. 54, 6-7, p. 1369-1377 9 p.

  研究成果: Article › 同行評審

  • Electronic paper 100%
  • Taguchi methods 94%
  • failure modes 74%
  • Failure modes 54%
  • Display devices 47%
  19 引文 斯高帕斯（Scopus）

• The Integration of Group Technology and Simulation Optimization to Solve the Flow Shop with Highly Variable Cycle Time Process: A Surgery Scheduling Case Study

  Wang, T. K., Chan, F. T. S. & Yang, T., 2014, 於: Mathematical Problems in Engineering. 2014, 796035.

  研究成果: Article › 同行評審

  開啟存取

  • Group Technology 100%
  • Group technology 85%
  • Flow Shop 82%
  • Surgery 68%
  • Scheduling 63%
  10 引文 斯高帕斯（Scopus）
• 2013

  Rule extraction from support vector machines by genetic algorithms

  Chen, Y. C., Su, C. T. & Yang, T., 2013 9月, 於: Neural Computing and Applications. 23, 3-4, p. 729-739 11 p.

  研究成果: Article › 同行評審

  • Support vector machines 100%
  • Genetic algorithms 87%
  • Set theory 11%
  8 引文 斯高帕斯（Scopus）
• 2012

  Analysing optimum push/pull junction point location using multiple criteria decision-making for multistage stochastic production system

  Lu, J. C., Yang, T. & Suc, C. T., 2012 10月 1, 於: International Journal of Production Research. 50, 19, p. 5523-5537 15 p.

  研究成果: Article › 同行評審

  • Multiple Criteria Decision Making 100%
  • Pull 90%
  • Service Levels 86%
  • Decision making 63%
  • Thin film transistors 56%
  19 引文 斯高帕斯（Scopus）

• Evolving optimal fuzzy-connective-based hierarchical aggregation networks using genetic algorithms

  Su, C. T., Wang, F. F. & Yang, T., 2012 1月, 於: International Journal of Innovative Computing, Information and Control. 8, 1 B, p. 617-631 15 p.

  研究成果: Article › 同行評審

  • Fuzzy Connectives 100%
  • Network Algorithms 93%
  • Genetic Algorithm 68%
  • Learning 57%
  • Aggregation Function 54%
  5 引文 斯高帕斯（Scopus）

• Fuzzy multiple attribute decision-making method for a large 300-mm fab layout design

  Yang, T., Chang, Y. C. & Yang, Y. H., 2012 1月 1, 於: International Journal of Production Research. 50, 1, p. 119-132 14 p.

  研究成果: Article › 同行評審

  • Multiple Attribute Decision Making 100%
  • Layout 84%
  • Decision making 59%
  • Wafer Fabrication 24%
  • Facilities Management 19%
  8 引文 斯高帕斯（Scopus）

• Heuristic algorithms for a practical-size dynamic parallel-machine scheduling problem: Integrated-circuit wire bonding

  Yang, T. & Shen, Y. A., 2012 1月 1, 於: Production Planning and Control. 23, 1, p. 67-78 12 p.

  研究成果: Article › 同行評審

  • Integrated Circuits 100%
  • Parallel Machine Scheduling 96%
  • Heuristic Algorithm 79%
  • Heuristic algorithms 69%
  • Integrated circuits 64%
  10 引文 斯高帕斯（Scopus）

• Scheduling two-stage hybrid flow shops with parallel batch, release time, and machine eligibility constraints

  Wang, I. L., Yang, T. & Chang, Y. B., 2012 12月, 於: Journal of Intelligent Manufacturing. 23, 6, p. 2271-2280 10 p.

  研究成果: Article › 同行評審

  • Scheduling 100%
  • Interchanges 55%
  • Integer programming 52%
  • Semiconductor materials 42%
  • Industry 21%
  27 引文 斯高帕斯（Scopus）

• Simulation study for a proposed segmented automated material handling system design for 300-mm semiconductor fabs

  Hsieh, C. H., Cho, C., Yang, T. & Chang, T. J., 2012 12月, 於: Simulation Modelling Practice and Theory. 29, p. 18-31 14 p.

  研究成果: Article › 同行評審

  • Materials Handling 100%
  • System Design 77%
  • Semiconductors 70%
  • Materials handling 68%
  • Semiconductor materials 52%
  15 引文 斯高帕斯（Scopus）

• The development of a hierarchical rough-cut capacity planning model and demand management system for fishing-net manufacturing

  Hsieh, C. H., Yang, T., Su, C. T. & Lin, C. H., 2012 7月, 於: European Journal of Industrial Engineering. 6, 4, p. 422-440 19 p.

  研究成果: Article › 同行評審

  • Planning 100%
  • Industry 39%
  • Profitability 19%
  2 引文 斯高帕斯（Scopus）

• The use of a simulation, a hybrid Taguchi, and dual response surface methods in the automated material handling system tool-to-tool strategy for a 300-mm fab

  Yang, T., Shen, Y. A., Cho, C. & Lin, Y. R., 2012 5月, 於: European Journal of Industrial Engineering. 6, 3, p. 281-300 20 p.

  研究成果: Article › 同行評審

  • Materials handling 100%
  • Occupational risks 20%
  • Discrete event simulation 15%
  • Semiconductor materials 12%
  • Rails 12%
  9 引文 斯高帕斯（Scopus）
• 2011

  A lean pull system design analysed by value stream mapping and multiple criteria decision-making method under demand uncertainty

  Lu, J. C., Yang, T. & Wang, C. Y., 2011 3月, 於: International Journal of Computer Integrated Manufacturing. 24, 3, p. 211-228 18 p.

  研究成果: Article › 同行評審

  • Systems analysis 100%
  • Decision making 95%
  • Uncertainty 83%
  • Thin film transistors 56%
  • Production control 55%
  59 引文 斯高帕斯（Scopus）

• Evaluation of robustness of supply chain information-sharing strategies using a hybrid Taguchi and multiple criteria decision-making method

  Yang, T., Wen, Y. F. & Wang, F. F., 2011 12月, 於: International Journal of Production Economics. 134, 2, p. 458-466 9 p.

  研究成果: Article › 同行評審

  • Information Sharing 100%
  • Robustness 81%
  • Multiple Criteria Decision Making 74%
  • Supply chains 64%
  • Decision making 47%
  60 引文 斯高帕斯（Scopus）

• Lean-pull strategy in a re-entrant manufacturing environment: A pilot study for TFT-LCD array manufacturing

  Yang, T., Hsieh, C. H. & Cheng, B. Y., 2011 3月 15, 於: International Journal of Production Research. 49, 6, p. 1511-1529 19 p.

  研究成果: Article › 同行評審

  • Thin film transistors 100%
  • Liquid crystal displays 84%
  • Pull 80%
  • Manufacturing 72%
  • Buffer 54%
  30 引文 斯高帕斯（Scopus）

• The dynamic transfer batch-size decision for thin film transistor-liquid crystal display array manufacturing by artificial neural-network

  Yang, T. & Shen, Y. A., 2011 5月, 於: Computers and Industrial Engineering. 60, 4, p. 769-776 8 p.

  研究成果: Article › 同行評審

  • Thin film transistors 100%
  • Liquid crystal displays 84%
  • Neural networks 47%
  • Materials handling 22%
  • Glass 15%
  6 引文 斯高帕斯（Scopus）

• The use of a multiple attribute decision-making method and value stream mapping in solving the pacemaker location problem

  Yang, T. & Lu, J. C., 2011 5月 15, 於: International Journal of Production Research. 49, 10, p. 2793-2817 25 p.

  研究成果: Article › 同行評審

  • Pacemakers 100%
  • Lean production 99%
  • Value Stream Mapping 97%
  • Multiple Attribute Decision Making 90%
  • Location Problem 85%
  40 引文 斯高帕斯（Scopus）
• 2010

  A hybrid dynamic pre-emptive and competitive neural-network approach in solving the multi-objective dispatching problem for TFT-LCD manufacturing

  Yang, T. & Lu, J. C., 2010 1月, 於: International Journal of Production Research. 48, 16, p. 4807-4828 22 p.

  研究成果: Article › 同行評審

  • Dispatching 100%
  • Thin film transistors 96%
  • Neural Networks 90%
  • Liquid crystal displays 81%
  • Manufacturing 70%
  9 引文 斯高帕斯（Scopus）

• The use of mahalanobis distance in solving the sputtering process thin-film thickness uniformity quality problem

  Yang, T., Cheng, Y. T. & Shen, Y. A., 2010 1月 1, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 33, 7, p. 1021-1033 13 p.

  研究成果: Article › 同行評審

  • Sputtering 100%
  • Film thickness 84%
  • Thin films 73%
  • Discriminant analysis 50%
  • Color 33%

• The use of mahalanobis distance in solving the sputtering process thin-film thickness uniformity quality problem

  Yang, T., Cheng, Y. T. & Shen, Y. A., 2010, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A. 33, 7

  研究成果: Article › 同行評審

  • Sputtering 100%
  • Film thickness 84%
  • Thin films 73%
  • Discriminant analysis 50%
  • Color 33%

• The use of Mahalanobis-Taguchi System to improve flip-chip bumping height inspection efficiency

  Yang, T. & Cheng, Y. T., 2010 3月 1, 於: Microelectronics Reliability. 50, 3, p. 407-414 8 p.

  研究成果: Article › 同行評審

  • inspection 100%
  • chips 84%
  • Inspection 81%
  • Microelectronics 60%
  • Industry 39%
  28 引文 斯高帕斯（Scopus）
• 2009

  An evolutionary simulation-optimization approach in solving parallel-machine scheduling problems - A case study

  Yang, T., 2009 4月, 於: Computers and Industrial Engineering. 56, 3, p. 1126-1136 11 p.

  研究成果: Article › 同行評審

  • Scheduling 100%
  • Integrated circuits 22%
  • Packaging 21%
  34 引文 斯高帕斯（Scopus）

• An incentive pay system for project management based on responsibility assignment matrix and fuzzy linguistic variables

  Yang, T. & Chen, C. W., 2009 12月, 於: Expert Systems With Applications. 36, 10, p. 12585-12591 7 p.

  研究成果: Article › 同行評審

  • Project management 100%
  • Linguistics 89%
  • Feedback 19%
  18 引文 斯高帕斯（Scopus）

• Six-Sigma project selection using national quality award criteria and Delphi fuzzy multiple criteria decision-making method

  Yang, T. & Hsieh, C. H., 2009 5月, 於: Expert Systems With Applications. 36, 4, p. 7594-7603 10 p.

  研究成果: Article › 同行評審

  • Decision making 53%
  • Industry 10%
  • Personnel 9%
  97 引文 斯高帕斯（Scopus）
• 2008

  The use of a grey-based Taguchi method for optimizing multi-response simulation problems

  Kuo, Y., Yang, T. & Huang, G. W., 2008 6月, 於: Engineering Optimization. 40, 6, p. 517-528 12 p.

  研究成果: Article › 同行評審

  • Taguchi Method 100%
  • Taguchi methods 67%
  • Simulation 38%
  • Grey Relational Analysis 22%
  • Systems analysis 17%
  135 引文 斯高帕斯（Scopus）

• The use of grey relational analysis in solving multiple attribute decision-making problems

  Kuo, Y., Yang, T. & Huang, G. W., 2008 8月, 於: Computers and Industrial Engineering. 55, 1, p. 80-93 14 p.

  研究成果: Article › 同行評審

  • Decision making 100%
  • Data envelopment analysis 94%
  698 引文 斯高帕斯（Scopus）

• Using simulation and multi-criteria methods to provide robust solutions to dispatching problems in a flow shop with multiple processors

  Kuo, Y., Yang, T., Cho, C. & Tseng, Y. C., 2008 6月, 於: Mathematics and Computers in Simulation. 78, 1, p. 40-56 17 p.

  研究成果: Article › 同行評審

  • Dispatching Rules 100%
  • Flow Shop 73%
  • Multi-criteria 67%
  • Simulation 34%
  • Performance 32%
  38 引文 斯高帕斯（Scopus）
• 2007

  A genetic algorithms simulation approach for the multi-attribute combinatorial dispatching decision problem

  Yang, T., Kuo, Y. & Cho, C., 2007 2月 1, 於: European Journal of Operational Research. 176, 3, p. 1859-1873 15 p.

  研究成果: Article › 同行評審

  • Genetic Algorithm 90%
  • Dispatching 81%
  • Decision problem 62%
  • Attribute 58%
  • Genetic algorithms 43%
  66 引文 斯高帕斯（Scopus）

• An evolutionary-simulation approach for the optimization of multi-constant work-in-process strategy-A case study

  Yang, T., Fu, H. P. & Yang, K. Y., 2007 5月, 於: International Journal of Production Economics. 107, 1, p. 104-114 11 p.

  研究成果: Article › 同行評審

  • Strategy Process 100%
  • Computational efficiency 80%
  • Computational complexity 67%
  • Evolutionary 63%
  • Simulation Optimization 58%
  45 引文 斯高帕斯（Scopus）

• Evaluating the supply chain performance of IT-based inter-enterprise collaboration

  Chen, M. C., Yang, T. & Li, H. C., 2007 9月, 於: Information and Management. 44, 6, p. 524-534 11 p.

  研究成果: Article › 同行評審

  • Forecasting and Replenishment Collaborative Planning 100%
  • Supply Chain Performance 67%
  • Supply chains 64%
  • Collaboration Strategy 32%
  • Retailers 30%
  77 引文 斯高帕斯（Scopus）

• Investigating the value of information sharing in multi-echelon supply chains

  Chen, M. C., Yang, T. & Yen, C. T., 2007 6月, 於: Quality and Quantity. 41, 3, p. 497-511 15 p.

  研究成果: Article › 同行評審

  • Information Sharing 100%
  • performance 26%
  • Scenarios 26%
  • Performance 22%
  • Profit 21%
  48 引文 斯高帕斯（Scopus）

• Multiple-attribute decision making methods for plant layout design problem

  Yang, T. & Hung, C. C., 2007 2月, 於: Robotics and Computer-Integrated Manufacturing. 23, 1, p. 126-137 12 p.

  研究成果: Article › 同行評審

  • Multiple Attribute Decision Making 100%
  • Plant layout 97%
  • Layout 79%
  • Decision making 49%
  • Design 42%
  357 引文 斯高帕斯（Scopus）