Yean-Liang Su

2022

Mechanical, tribological and anti-corrosion properties of AlCrNbSiTi high entropy coatings with various nitrogen fluxes and application to nickel-based alloy milling

Kao, W. H., Su, Y. L., Horng, J. H. & Wu, W. C., 2022 4月 15, 於: Materials Chemistry and Physics. 282, 125999.

研究成果: Article › 同行評審

Mechanical and Tribological Properties of NbAl, NbAlN, and NbAIN-CH Coatings Deposited using Various Niobium Target Currents and Acetylene Flow Rates

Su, Y. L., Kao, W. H. & Sung, K. H., 2022 5月, 於: Journal of Materials Engineering and Performance. 31, 5, p. 3594-3610 17 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Mechanical and Tribological Properties of NbTiAl_x, NbTiAl_0.5N_y, and NbTiAl_0.5N₁₄-CH_z Coatings with Various Aluminum Target Currents and Nitrogen and Acetylene Flow Rates

Su, Y. L., Kao, W. H. & Chen, B. Y., 2022, (Accepted/In press) 於: Journal of Materials Engineering and Performance.

研究成果: Article › 同行評審

Tribological, Anti-corrosion, and Electrical Conductivity Properties of CrC_x Coatings Deposited on Stainless Steel 316L and Used as Metal Bipolar Plates for Fuel Cells

Su, Y. L., Kao, W. H. & Chang, G. Y., 2022, (Accepted/In press) 於: Journal of Materials Engineering and Performance.

研究成果: Article › 同行評審

2021

Effects of Acetylene Flow Rate on Structure, Mechanical Properties, and Tribological Properties of Cr-CH_x Coatings Deposited by Radio Frequency Magnetron Sputtering

Su, Y. L., Kao, W. H. & Chen, G. Y., 2021 12月, 於: Journal of Materials Engineering and Performance. 30, 12, p. 9084-9093 10 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Effects of carbon doping on mechanical, tribological, structural, anti-corrosion and anti-glass-sticking properties of CrNbSiTaZr high entropy alloy coatings

Kao, W. H., Su, Y. L., Horng, J. H. & Wu, H. M., 2021 1月 1, 於: Thin Solid Films. 717, 138448.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

Mechanical, tribological, anti-corrosion and anti-glass sticking properties of high-entropy TaNbSiZrCr carbide coatings prepared using radio-frequency magnetron sputtering

Kao, W. H., Su, Y. L., Horng, J. H. & Wu, W. C., 2021 8月 1, 於: Materials Chemistry and Physics. 268, 124741.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Structure, mechanical properties and thermal stability of nitrogen-doped TaNbSiZrCr high entropy alloy coatings and their application to glass moulding and micro-drills

Kao, W. H., Su, Y. L., Horng, J. H. & Wu, C. M., 2021 1月 15, 於: Surface and Coatings Technology. 405, 126539.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

Taguchi Optimization of Wear Resistance of CrN Coatings Deposited on WC Substrates Using High-Power Impulse Magnetron Sputtering Technology and Application to High-Speed Micro-Drilling

Kao, W. H., Su, Y. L. & Chung, S. T., 2021 8月, 於: Journal of Materials Engineering and Performance. 30, 8, p. 6243-6257 15 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

2020

Effects of pulse power and argon flux flow rate on mechanical and tribological properties of diamond-like carbon coatings prepared using high power impulse magnetron sputtering technology

Kao, W. H., Su, Y. L., Horng, J. H. & Yu, C. C., 2020 1月 1, 於: Thin Solid Films. 693, 137712.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Effects of Varying Power and Argon Gas Flux on Tribological Properties and High-Speed Drilling Performance of Diamond-Like Carbon Coatings Deposited using High-Power Impulse Magnetron Sputtering System

Kao, W. H., Su, Y. L. & Shih, M. Y., 2020 11月, 於: Journal of Materials Engineering and Performance. 29, 11, p. 7291-7307 17 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Mechanical and Tribological Properties and High-Speed Drilling Performance of NbTiN Coatings Prepared by High-Power Impulse Magnetron Sputtering with Varying Nitrogen and Acetylene Flux Rates

Su, Y. L., Kao, W. H. & Chang, Y. C., 2020 12月, 於: Journal of Materials Engineering and Performance. 29, 12, p. 8194-8212 19 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Mechanical and Tribological Properties of NbTi-N_X and NbTi-N₁₂-CH Coatings Prepared Using Radio Frequency Magnetron Sputtering and Their Application for Micro-drills

Su, Y. L., Kao, W. H. & Mao, Y. H., 2020 1月 1, 於: Journal of Materials Engineering and Performance. 29, 1, p. 259-277 19 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

乙炔氣體的流量和鈦金屬的添加對於類鑽碳之機械與磨潤性質的影響

Su, Y. L., Horng, J. H., Torskaya, E., Kao, W. H. & Yu, C. C., 2020 2月 1, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 41, 1, p. 11-20 10 p.

研究成果: Article › 同行評審

2018

Enhanced Tribological, Electrochemical, and Biocompatibility Properties of Ti6Al4V Alloy Through Gas Nitriding and CN Coating Deposition

Kao, W. H., Su, Y. L. & Chang, C. Y., 2018 10月 1, 於: Journal of Materials Engineering and Performance. 27, 10, p. 5329-5340 12 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy produced by selective laser melting method and then processed using gas nitriding, CN or Ti-C:H coating treatments

Kao, W. H., Su, Y. L., Horng, J. H. & Chang, C. Y., 2018 9月 25, 於: Surface and Coatings Technology. 350, p. 172-187 16 p.

研究成果: Article › 同行評審

32 引文斯高帕斯（Scopus）

Tribological performance, electrochemical behavior and biocompatibility of high-temperature gas-nitrided Ti6Al4V alloy

Kao, W. H., Su, Y. L., Horng, J. H. & Yang, S. E., 2018 11月 13, 於: Industrial Lubrication and Tribology. 70, 8, p. 1536-1544 9 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Tribological properties of biomedical 316L stainless steel after plasma nitriding and Ti-C:H sputtering coating

Kao, W. H. & Su, Y. L., 2018 11月 13, 於: Industrial Lubrication and Tribology. 70, 8, p. 1516-1526 11 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

2017

Antibacterial and tribological performance of carbonitride coatings doped with W, Ti, Zr, or Cr deposited on AISI 316L stainless steel

Yao, S. H., Su, Y. L. & Lai, Y. C., 2017 10月 17, 於: Materials. 10, 10, 1189.

研究成果: Article › 同行評審

開啟存取

10 引文斯高帕斯（Scopus）

Effects of Duplex Nitriding and TiN Coating Treatment on Wear Resistance, Corrosion Resistance and Biocompatibility of Ti6Al4V Alloy

Kao, W. H., Su, Y. L. & Hsieh, Y. T., 2017 8月 1, 於: Journal of Materials Engineering and Performance. 26, 8, p. 3686-3697 12 p.

研究成果: Article › 同行評審

17 引文斯高帕斯（Scopus）

Improved tribological properties, electrochemical resistance and biocompatibility of AISI 316L stainless steel through duplex plasma nitriding and TiN coating treatment

Kao, W. H., Su, Y. L., Horng, J. H. & Hsieh, Y. T., 2017 7月 1, 於: Journal of Biomaterials Applications. 32, 1, p. 12-27 16 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

2016

Effects of Ti-C:H coating and plasma nitriding treatment on tribological, electrochemical, and biocompatibility properties of AISI 316L

Kao, W. H., Su, Y. L., Horng, J. H. & Zhang, K. X., 2016 8月 1, 於: Journal of Biomaterials Applications. 31, 2, p. 215-229 15 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

The Tribological Performance of Surface Treated Ti6A14V as Sliding Against Si₃N₄ Ball and 316L Stainless Steel Cylinder

Kao, W. H., Su, Y. L., Horng, J. H. & Huang, H. C., 2016 12月 1, 於: Journal of Materials Engineering and Performance. 25, 12, p. 5209-5219 11 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

2015

Application of taguchi method to the optimization of a-C:H coatings deposited using ion beam assisted physical vapor deposition

Kao, W. H., Su, Y. L., Horng, J. H., Yao, S. H. & Huang, H. C., 2015, 於: Advances in Mechanical Engineering. 7, 2, 582653.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Improved tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy by gas-nitriding and Ti-C:H coating

Kao, W. H., Su, Y. L., Horng, J. H., Huang, H. C. & Yang, S. E., 2015 12月 15, 於: Surface and Coatings Technology. 283, p. 70-79 10 p.

研究成果: Article › 同行評審

21 引文斯高帕斯（Scopus）

Microstructure, phase transformation and hardness of nanometric Cr-Al multilayer coatings

Su, Y. L. & Lin, Y. F., 2015 6月 8, 於: Advances in Mechanical Engineering. 7, 6, p. 1-7 7 p.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

The tribological properties of Zr/a-C:Zr/Zr-C:H-x films with various pulsed-direct current power frequency sliding against various normal loading

Kao, W. H., Su, Y. L., Horng, J. H., Yao, S. H. & Huang, H. C., 2015 5月 1, 於: Materials Research Innovations. 19, p. S5337-S5342

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2011

Effect of TiO₂ content on wear performance and mechanisms of aluminum oxide based ceramic coatings

Yao, S. H., Su, Y-L. & Gao, W. X., 2011 5月 1, 於: Sichuan Daxue Xuebao (Gongcheng Kexue Ban)/Journal of Sichuan University (Engineering Science Edition). 43, 3, p. 204-208 5 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Performance of nanolayer CrN/Ag coated cutting tools

Yao, S. H., Su, Y-L., Kao, W. H., Cheng, K. W. & Su, C. T., 2011 4月 1, 於: Surface Engineering. 27, 3, p. 180-188 9 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition

Kao, W. H., Su, Y. L., Yao, S. H. & Huang, H. C., 2011 11月 1, 於: Thin Solid Films. 520, 2, p. 842-848 7 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

2010

Application of Cr-Ag-N and Cr-W-N nano-composite thin films on micro-drills

Yao, S. H., Su, Y-L., Gao, W. X. & Zheng, K. W., 2010 2月 1, 於: Cailiao Kexue yu Gongyi/Material Science and Technology. 18, 1, p. 75-78 4 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

A wear-resistant coating-Oxidized graded multilayer TiN/W coating

Yao, S. H., Su, Y. L., Kao, W. H. & Cheng, K. W., 2010 1月 15, 於: Materials Letters. 64, 1, p. 99-101 3 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

Nanolayer CrNx/WNy coatings used on micro drills for machining of printed circuit boards

Yao, S. H., Su, Y. L., Kao, W. H., Cheng, K. W. & Su, C. T., 2010 3月 1, 於: Journal of Materials Processing Technology. 210, 4, p. 660-668 9 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

Optimizing the tribological properties and high-speed drilling performance of a-C:H coatings via nitrogen addition

Kao, W. H., Su, Y. L., Yao, S. H. & Huang, H. C., 2010 1月 15, 於: Surface and Coatings Technology. 204, 8, p. 1277-1287 11 p.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

2008

Tribological performance of nano-structured WC reinforced Ni-based alloy HVOF coatings

Yao, S. H., Su, Y. L., Gao, W. X. & Zheng, K. W., 2008 1月, 於: Mocaxue Xuebao/Tribology. 28, 1, p. 33-38 6 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

2006

Evaluation on wear behavior of Cr-Ag-N and Cr-W-N PVD nanocomposite coatings using two different types of tribometer

Yao, S. H., Su, Y. L., Kao, W. H. & Cheng, K. W., 2006 12月 4, 於: Surface and Coatings Technology. 201, 6, p. 2520-2526 7 p.

研究成果: Article › 同行評審

53 引文斯高帕斯（Scopus）

Friction and wear properties of Cr:(W_x,N_0.1) coatings deposited by magnetron sputtering

Su, Y. L., Su, C. T., Yao, S. H., Yur, J. P., Hsu, C. A. & Liu, T. H., 2006 6月 20, 於: Vacuum. 80, 9, p. 1021-1031 11 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Improving tribological properties and machining performance of a-C coatings by doping with titanium

Kao, W. H., Su, Y. L. & Yao, S. H., 2006 10月, 於: Journal of Materials Engineering and Performance. 15, 5, p. 525-534 10 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Tribological performance of ZrN ceramic thin films with Ti additions

Yao, S. H., Su, Y. L., Gao, W. X. & Cheng, K. W., 2006 9月 1, 於: Mocaxue Xuebao/Tribology. 26, 5, p. 413-416 4 p.

研究成果: Article › 同行評審

Tribological property and drilling application of Ti-C:H and Cr-C:H coatings on high-speed steel substrates

Kao, W. H., Su, Y. L. & Yao, S. H., 2006 3月 10, 於: Vacuum. 80, 6, p. 604-614 11 p.

研究成果: Article › 同行評審

39 引文斯高帕斯（Scopus）

Tribology and oxidation behavior of TiN/AlN nano-multilayer films

Yao, S. H., Su, Y. L., Kao, W. H. & Liu, T. H., 2006 4月, 於: Tribology International. 39, 4, p. 332-341 10 p.

研究成果: Article › 同行評審

38 引文斯高帕斯（Scopus）

Wear of CrC-coated carbide tools in dry machining

Su, Y. L., Liu, T. H., Su, C. T., Yao, S. H., Kao, W. H. & Cheng, K. W., 2006 1月 10, 於: Journal of Materials Processing Technology. 171, 1, p. 108-117 10 p.

研究成果: Article › 同行評審

34 引文斯高帕斯（Scopus）

2005

Effect of Ag/W addition on the wear performance of CrN coatings prepared by RF unbalanced magnetron sputtering

Yao, S. H., Su, Y. L. & Kao, W. H., 2005 5月 25, 於: Materials Science and Engineering A. 398, 1-2, p. 88-92 5 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Effect of periods on wear performance of TiN/AlN superlattice films

Yao, S. H., Kao, W. H., Su, Y. L. & Liu, T. H., 2005 2月 15, 於: Materials Science and Engineering A. 392, 1-2, p. 380-385 6 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

Effects of tungsten on the microstructures and tribological properties of CrN-W_x% coatings

Su, Y. L. & Liu, T. H., 2005 3月 25, 於: Materials Science and Engineering A. 395, 1-2, p. 241-250 10 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

On the micro-drilling and turning performance of TiN/AlN nano-multilayer films

Yao, S. H., Su, Y. L., Kao, W. H. & Liu, T. H., 2005 2月 15, 於: Materials Science and Engineering A. 392, 1-2, p. 340-347 8 p.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Study of the wear-resistance and machining application of magnetron sputtered TiN/AIN nano-multilayer films

Yao, S. H., Su, Y-L., Gao, W. X. & Liu, C. H., 2005 5月 1, 於: Mocaxue Xuebao/Tribology. 25, 3, p. 258-264 7 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

The optimum composition of Me-C:H coatings on drills for cutting performance

Kao, W. H., Su, Y. L., Yao, S. H. & Luan, J. M., 2005 5月 25, 於: Materials Science and Engineering A. 398, 1-2, p. 233-240 8 p.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

TiN-AlN nanomultilayer films for microdrilling and machining

Yao, S. H., Su, Y. L., Kao, W. H. & Cheng, K. W., 2005 8月, 於: Surface Engineering. 21, 4, p. 307-314 8 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Tribological properties of Ti₂N-W_x% coatings deposited by magnetron sputtering

Su, Y. L. & Liu, T. H., 2005 2月 18, 於: Vacuum. 77, 3, p. 343-354 12 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

蘇 演良

研究成果

搜尋結果

蘇演良