每年專案
個人檔案
學歷
- 1995 馬里蘭大學機械工程博士
研究專長
- 3D 金屬列印
- 生醫光電
- 光學量測
- 固體力學
經歷
- 1987/08 ~ 1989/04 Assistant Engineer, Yue-Loong Motor Engineering Center
- 1996/02 ~ 1996/07 Engineer, Opto-Electronics & Systems Lab, Industrial Technology Research Institute
- 1996/08 ~ 1997/02 Lecturer, Department of Mechanical Engineering, National Cheng Kung University
- 1997/03 ~ 1999/07 Assistant Professor, Department of Mechanical Engineering, National Cheng Kung University
- 1999/02 ~ 2000/01 Affiliate Assistant Professor, Mechanical Engineering, National Chung Cheng University
- 1999/08 ~ 2002/07 Associate Professor, Department of Mechanical Engineering, National Cheng Kung University
- 2002/08 ~ 2005/07 Associate Head, Department of Mechanical Engineering, National Cheng Kung University
- 2002/08 ~ 2005/07 Director of Machine Shop, Department of Mechanical Engineering, National Cheng Kung University
- 2002/08 ~ present Professor, Department of Mechanical Engineering, National Cheng Kung University
- 2005/08 ~ present Affiliate Professor, Institute of Nanotechnology and Microsystem Engineering, National Cheng Kung University
- 2006/08 ~ present Distinguished Professor, Department of Mechanical Engineering, National Cheng Kung University
- 2010/02 ~ present Director, Instrument Development Center
- 2010/02 ~ present Director, NSC Instrument Center, National Cheng Kung University
與 UN SDG 相關的專業知識
聯合國會員國於 2015 年同意 17 項全球永續發展目標 (SDG),以終結貧困、保護地球並確保全體的興盛繁榮。此人的作品有助於以下永續發展目標:
指紋
查看啟用 Yu-Lung Lo 的研究主題。這些主題標籤來自此人的作品。共同形成了獨特的指紋。
- 1 類似的個人檔案
過去五年中的合作和熱門研究領域
國家/地區層面的近期外部共同作業。按一下圓點深入探索詳細資料,或
專案
- 66 已完成
-
A complete phase distribution map of the laser affected zone and ablation debris formed by nanosecond laser-cutting of SiC
Rouhani, M., Metla, S. B. S., Hobley, J., Karnam, D., Hung, C. H., Lo, Y. L. & Jeng, Y. R., 2025 4月, 於: Journal of Materials Processing Technology. 338, 118782.研究成果: Article › 同行評審
1 引文 斯高帕斯(Scopus) -
Novel approach to nanosecond laser drilling of a crack-free through hole on SiC wafer
Bustamante, L., Karnam, D. & Lo, Y. L., 2025 3月 1, 於: Journal of Materials Research and Technology. 35, p. 5818-5829 12 p.研究成果: Article › 同行評審
開啟存取 -
Optimized Nanosecond Laser Cutting of SiC Wafers: A Simulation-Driven Approach
Karnam, D. & Lo, Y. L., 2025, (Accepted/In press) 於: Advanced Materials Technologies.研究成果: Article › 同行評審
-
Optimizing 3D Laser Foil Printing Parameters for AA 6061: Numerical and Experimental Analysis
Lin, Y. C., Raza, M. M., Hung, C. H., Wang, Y. X. & Lo, Y. L., 2025 3月 1, 於: Journal of Manufacturing Science and Engineering. 147, 3, 031003.研究成果: Article › 同行評審
-
Using Machine learning to predict blood glucose level based on Photoplethysmography
Jian, S. E., Lo, Y. L., Chuang, Y. T. & Kuo, S. H., 2025 9月 1, 於: Measurement: Journal of the International Measurement Confederation. 253, 117421.研究成果: Article › 同行評審