每年研究成果
每年研究成果
- 1個結果中的 - 50103
搜尋結果
-
2022
Efficient Modeling of Heat Conduction across Thin Surface Coatings on 3D Anisotropic Substrate
Shiah, Y. C., Huang, P. W., Hematiyan, M. R. & Tuan, N. A., 2022 6月, 於: Aerospace. 9, 6, 321.研究成果: Article › 同行評審
開啟存取 -
Identification of Time Variations of Moving Loads Applied to Plates Resting on Viscoelastic Foundation Using a Meshfree Method
Behradnia, S., Khosravifard, A., Hematiyan, M. R. & Shiah, Y. C., 2022 7月, 於: Aerospace. 9, 7, 357.研究成果: Article › 同行評審
開啟存取 -
Theoretical investigation of the power curve of small HAWT by combining aerodynamic and mechatronic systems
Chen, Y. J., Shiah, Y. C., Tsai, Y. L., Chang, C. H. & Chen, M. H., 2022 1月, 於: International Journal of Energy Research. 46, 1, p. 433-440 8 p.研究成果: Article › 同行評審
開啟存取2 引文 斯高帕斯（Scopus） -
2021
An efficient boundary-type meshfree method for analysis of two-dimensional laser heating problems
Mohammadi, M., Hematiyan, M. R. & Shiah, Y. C., 2021 11月 1, 於: Engineering Analysis with Boundary Elements. 132, p. 460-468 9 p.研究成果: Article › 同行評審
5 引文 斯高帕斯（Scopus） -
Canard optimization for enhancing the performance of small horizontal axis wind turbine at low wind speeds
Shiah, Y. C., Chang, C. H., Chen, Y. J. & Reddy, A. V. K., 2021, 於: Journal of Mechanics. 37, p. 63-71 9 p.研究成果: Article › 同行評審
開啟存取 -
Three-dimensional analysis of heat conduction in anisotropic composites with thin adhesive/interstitial media by the boundary element method
Shiah, Y. C., Chang, R. Y. & Hematiyan, M. R., 2021 2月 1, 於: Engineering Analysis with Boundary Elements. 123, p. 36-47 12 p.研究成果: Article › 同行評審
7 引文 斯高帕斯（Scopus） -
2020
An inverse meshfree thermoelastic analysis for identification of temperature-dependent thermal and mechanical material properties
Dadar, N., Hematiyan, M. R., Khosravifard, A. & Shiah, Y. C., 2020 9月 1, 於: Journal of Thermal Stresses. 43, 9, p. 1165-1188 24 p.研究成果: Article › 同行評審
5 引文 斯高帕斯（Scopus） -
Efficient 2D analysis of interfacial thermoelastic stresses in multiply bonded anisotropic composites with thin adhesives
Shiah, Y. C., Huang, S. C. & Hematiyan, M. R., 2020 6月, 於: Computers, Materials and Continua. 64, 2, p. 701-727 27 p.研究成果: Article › 同行評審
開啟存取4 引文 斯高帕斯（Scopus） -
Load identification for a viscoelastic solid by an accurate meshfree sensitivity analysis
Jamshidi, B., Hematiyan, M. R., Mahzoon, M. & Shiah, Y. C., 2020 1月 15, 於: Engineering Structures. 203, 109895.研究成果: Article › 同行評審
15 引文 斯高帕斯（Scopus） -
Performance Prediction for Small Horizontal Axis Wind Turbine (HAWT) by Integrated Theory and Experimental Verifications
Chen, Y. J., Huang, G. Y., Shiah, Y. C. & Tsai, Y. L., 2020 1月 1, 於: International Journal of Precision Engineering and Manufacturing - Green Technology. 7, 1, p. 131-140 10 p.研究成果: Article › 同行評審
4 引文 斯高帕斯（Scopus） -
2019
Bem Study of 3D Heat Conduction in Multiply Adjoined Anisotropic Media with Quadratic Domain Heat Generation
Tuan, N. A. & Shiah, Y. C., 2019 4月 1, 於: Journal of Mechanics. 35, 2, p. 225-231 7 p.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
Boundary element analysis of the stress intensity factors of plane interface cracks between dissimilarly adjoined anisotropic materials
Shiah, Y. C., Hwu, C. & Yao, J. J., 2019 9月, 於: Engineering Analysis with Boundary Elements. 106, p. 68-74 7 p.研究成果: Article › 同行評審
10 引文 斯高帕斯（Scopus） -
Fundamental solutions for two-dimensional anisotropic thermo-magneto-electro-elasticity
Hwu, C., Hsu, C. L., Hsu, C. W. & Shiah, Y. C., 2019 11月 1, 於: Mathematics and Mechanics of Solids. 24, 11, p. 3575-3596 22 p.研究成果: Article › 同行評審
5 引文 斯高帕斯（Scopus） -
Load identification for viscoplastic materials with some unknown material parameters
Kazemi, Z., Hematiyan, M. R. & Shiah, Y. C., 2019 4月, 於: International Journal of Mechanical Sciences. 153-154, p. 164-177 14 p.研究成果: Article › 同行評審
12 引文 斯高帕斯（Scopus） -
Thermal Stress Analysis of 3D Anisotropic Materials Involving Domain Heat Source by the Boundary Element Method
Shiah, Y. C., Tuan, N. A. & Hematiyan, M. R., 2019 12月 1, 於: Journal of Mechanics. 35, 6, p. 839-850 12 p.研究成果: Article › 同行評審
開啟存取2 引文 斯高帕斯（Scopus） -
Three-dimensional boundary element analysis for anisotropic elastic solids and its extension to piezoelectric and magnetoelectroelastic solids
Hsu, C. L., Hwu, C. & Shiah, Y. C., 2019 1月, 於: Engineering Analysis with Boundary Elements. 98, p. 265-280 16 p.研究成果: Article › 同行評審
14 引文 斯高帕斯（Scopus） -
Two-dimensional analysis of interlaminar stresses in thin anisotropic composites subjected to inertial loads by regularized boundary integral equation
Shiah, Y. C. & Hsu, K. W., 2019 2月 15, 於: Composites Part B: Engineering. 159, p. 105-113 9 p.研究成果: Article › 同行評審
2 引文 斯高帕斯（Scopus） -
2018
3D CFD simulation and parametric study of a flat plate deflector for vertical axis wind turbine
Wong, K. H., Chong, W. T., Poh, S. C., Shiah, Y. C., Sukiman, N. L. & Wang, C. T., 2018 12月, 於: Renewable Energy. 129, p. 32-55 24 p.研究成果: Article › 同行評審
62 引文 斯高帕斯（Scopus） -
Analysis of 2D anisotropic thermoelasticity involving constant volume heat source by directly transformed boundary integral equation
Shiah, Y. U. C. H., Hsu, C. L. & Hwu, C., 2018 8月, 於: Engineering Analysis with Boundary Elements. 93, p. 44-52 9 p.研究成果: Article › 同行評審
4 引文 斯高帕斯（Scopus） -
An efficient analysis of steady-state heat conduction involving curved line/surface heat sources in two/three-dimensional isotropic media
Mohammadi, M., Hematiyan, M. R. & Shiah, Y. C., 2018, 於: Journal of Theoretical and Applied Mechanics (Poland). 56, 4, p. 1123-1137 15 p.研究成果: Article › 同行評審
6 引文 斯高帕斯（Scopus） -
An efficient load identification for viscoplastic materials by an inverse meshfree analysis
Kazemi, Z., Hematiyan, M. R. & Shiah, Y. C., 2018 2月, 於: International Journal of Mechanical Sciences. 136, p. 303-312 10 p.研究成果: Article › 同行評審
13 引文 斯高帕斯（Scopus） -
Direct transformation of the volume integral in the boundary integral equation for treating three-dimensional steady-state anisotropic thermoelasticity involving volume heat source
Shiah, Y. C., Anh Tuan, N. & Hematiyan, M. R., 2018 6月 15, 於: International Journal of Solids and Structures. 143, p. 287-297 11 p.研究成果: Article › 同行評審
開啟存取2 引文 斯高帕斯（Scopus） -
Experimental and simulation investigation into the effects of a flat plate deflector on vertical axis wind turbine
Wong, K. H., Chong, W. T., Sukiman, N. L., Shiah, Y. C., Poh, S. C., Sopian, K. & Wang, W. C., 2018 3月 15, 於: Energy Conversion and Management. 160, p. 109-125 17 p.研究成果: Article › 同行評審
66 引文 斯高帕斯（Scopus） -
Interlaminar stresses analysis of three-dimensional composite laminates by the boundary element method
Shiah, Y. C. & Hematiyan, M. R., 2018 12月 1, 於: Journal of Mechanics. 34, 6, p. 829-837 9 p.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
2017
A new stable inverse method for identification of the elastic constants of a three-dimensional generally anisotropic solid
Hematiyan, M. R., Khosravifard, A. & Shiah, Y. C., 2017 2月 1, 於: International Journal of Solids and Structures. 106-107, p. 240-250 11 p.研究成果: Article › 同行評審
28 引文 斯高帕斯（Scopus） -
Boundary Element Calculation of Near-Boundary Solutions in 3D Generally Anisotropic Solids by the Self-Regularization Scheme
Shiah, Y. C. & Chang, L. D., 2017 12月 1, 於: Journal of Mechanics. 33, 6, p. 813-820 8 p.研究成果: Article › 同行評審
2 引文 斯高帕斯（Scopus） -
Power-Curve Corrections for Horizontal-Axis Wind Turbine by an Improved Blade Element Momentum Theory
Bai, C. J. & Shiah, Y. C., 2017 6月 1, 於: Journal of Mechanics. 33, 3, p. 341-349 9 p.研究成果: Article › 同行評審
1 引文 斯高帕斯（Scopus） -
2016
Analysis of thermoelastic stress-concentration around oblate cavities in three-dimensional generally anisotropic bodies by the boundary element method
Shiah, Y. C., 2016 3月 1, 於: International Journal of Solids and Structures. 81, p. 350-360 11 p.研究成果: Article › 同行評審
開啟存取4 引文 斯高帕斯（Scopus） -
Analytical transformation of volume integral for the time-stepping BEM analysis of 2D transient heat conduction in anisotropic media
Shiah, Y. C., Chaing, Y. C. & Matsumoto, T., 2016 3月 1, 於: Engineering Analysis with Boundary Elements. 64, p. 101-110 10 p.研究成果: Article › 同行評審
12 引文 斯高帕斯（Scopus） -
Boundary element analysis of interior thermoelastic stresses in three-dimensional generally anisotropic bodies
Shiah, Y. C. & Chong, J. Y., 2016 12月 1, 於: Journal of Mechanics. 32, 6, p. 725-735 11 p.研究成果: Article › 同行評審
5 引文 斯高帕斯（Scopus） -
Experiments and numerical simulations of the rotor-blade performance for a small-scale horizontal axis wind turbine
Lee, M. H., Shiah, Y. C. & Bai, C. J., 2016 2月 1, 於: Journal of Wind Engineering and Industrial Aerodynamics. 149, p. 17-29 13 p.研究成果: Article › 同行評審
68 引文 斯高帕斯（Scopus） -
Experiments on the performance of small horizontal axis wind turbine with passive pitch control by disk pulley
Chen, Y. J. & Shiah, Y. C., 2016 5月, 於: Energies. 9, 5, 353.研究成果: Article › 同行評審
開啟存取14 引文 斯高帕斯（Scopus） -
New domain integral transformation in boundary element analysis for 2D anisotropic thermoelasticity
Shiah, Y. C. & Wang, S. H., 2016 9月 1, 於: Journal of Engineering Mechanics. 142, 9, 04016065.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
New treatment of the self-weight and the inertial effects of rotation for the BEM formulation of 2D anisotropic solids
Shiah, Y. C. & Ye, S. Y., 2016 12月 1, 於: Engineering Analysis with Boundary Elements. 73, p. 170-180 11 p.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
Optimal design of protuberant blades for small variable-speed horizontal axis wind turbine-experiments and simulations
Huang, C. C., Bai, C. J., Shiah, Y. C. & Chen, Y. J., 2016 11月 15, 於: Energy. 115, p. 1156-1167 12 p.研究成果: Article › 同行評審
14 引文 斯高帕斯（Scopus） -
Thermoelastic analysis of 3D generally anisotropic bodies by the boundary element method
Shiah, Y. C. & Tan, C. L., 2016 3月 3, 於: European Journal of Computational Mechanics. 25, 1-2, p. 91-108 18 p.研究成果: Article › 同行評審
1 引文 斯高帕斯（Scopus） -
2015
3D Elastostatic Boundary Element Analysis of thin bodies by Integral Regularizations
Shiah, Y. C., 2015 10月 1, 於: Journal of Mechanics. 31, 5, p. 533-543 11 p.研究成果: Article › 同行評審
4 引文 斯高帕斯（Scopus） -
A novel inverse method for identification of 3D thermal conductivity coefficients of anisotropic media by the boundary element analysis
Hematiyan, M. R., Khosravifard, A. & Shiah, Y. C., 2015 6月 11, 於: International Journal of Heat and Mass Transfer. 89, p. 685-693 9 p.研究成果: Article › 同行評審
32 引文 斯高帕斯（Scopus） -
Boundary element analysis of thin anisotropic structures by a self-regularization scheme
Shiah, Y. C., Tan, C. L. & Chan, L. D., 2015 1月 1, 於: CMES - Computer Modeling in Engineering and Sciences. 109, 1, p. 15-33 19 p.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
Experimental study of the protuberance effect on the blade performance of a small horizontal axis wind turbine
Huang, G. Y., Shiah, Y. C., Bai, C. J. & Chong, W. T., 2015 12月 1, 於: Journal of Wind Engineering and Industrial Aerodynamics. 147, p. 202-211 10 p.研究成果: Article › 同行評審
62 引文 斯高帕斯（Scopus） -
The solution to an elliptic partial differential equation for facilitating exact volume integral transformation in the 3D BEM analysis
Shiah, Y. C. & Li, M. R., 2015 5月, 於: Engineering Analysis with Boundary Elements. 54, p. 13-18 6 p.研究成果: Article › 同行評審
2 引文 斯高帕斯（Scopus） -
2014
Analytical transformation of the volume integral in the boundary integral equation for 3D anisotropic elastostatics involving body force
Shiah, Y. C., 2014 8月 5, 於: Computer Methods in Applied Mechanics and Engineering. 278, p. 404-422 19 p.研究成果: Article › 同行評審
7 引文 斯高帕斯（Scopus） -
A novel approach to identify the thermal conductivities of a thin anisotropic medium by the boundary element method
Shiah, Y. C., Lee, Y. M. & Huang, T. C., 2014, 於: Computers, Materials and Continua. 39, 1, p. 49-71 23 p.研究成果: Article › 同行評審
3 引文 斯高帕斯（Scopus） -
Direct volume-to-surface integral transformation for 2D BEM analysis of anisotropic thermoelasticity
Shiah, Y. C., Hsu, C. L. & Hwu, C., 2014, 於: CMES - Computer Modeling in Engineering and Sciences. 102, 4, p. 257-270 14 p.研究成果: Article › 同行評審
8 引文 斯高帕斯（Scopus） -
The boundary integral equation for 3D general anisotropic thermoelasticity
Shiah, Y. C. & Tan, C. L., 2014 1月 1, 於: CMES - Computer Modeling in Engineering and Sciences. 102, 6, p. 425-447 23 p.研究成果: Article › 同行評審
6 引文 斯高帕斯（Scopus） -
Transient heat conduction across thermal barrier coating on an anisotropic substrate
Lee, Y. M., Tsai, T. W. & Shiah, Y-C., 2014 1月 1, 於: Engineering Computations (Swansea, Wales). 31, 3, p. 510-529 20 p., 17110720.研究成果: Article › 同行評審
1 引文 斯高帕斯（Scopus） -
2013
BEM analysis of 3D heat conduction in 3D thin anisotropic media
Shiah, Y-C., Lee, Y. M. & Wang, C. C., 2013, 於: Computers, Materials and Continua. 33, 3, p. 229-255 27 p.研究成果: Article › 同行評審
5 引文 斯高帕斯（Scopus） -
Boundary element elastic stress analysis of 3D generally anisotropic solids using fundamental solutions based on Fourier series
Tan, C. L., Shiah, Y. C. & Wang, C. Y., 2013 8月 1, 於: International Journal of Solids and Structures. 50, 16-17, p. 2701-2711 11 p.研究成果: Article › 同行評審
開啟存取28 引文 斯高帕斯（Scopus） -
Efficient bem stress analysis of 3d generally anisotropic elastic solidswith stress concentrations and cracks
Shiah, Y-C., Tan, C. L. & Chen, Y. H., 2013 12月 1, 於: CMES - Computer Modeling in Engineering and Sciences. 96, 4, p. 243-257 15 p.研究成果: Article › 同行評審
7 引文 斯高帕斯（Scopus） -
Heat conduction analysis in an anisotropic thin film irradiated by an ultrafast pulse laser heating
Tsai, T. W., Lee, Y. M. & Shiah, Y. C., 2013 7月 15, 於: Numerical Heat Transfer; Part A: Applications. 64, 2, p. 132-152 21 p.研究成果: Article › 同行評審
7 引文 斯高帕斯（Scopus）