Yung-Chun Lee

2022

Evaluation of the stress gradient of the superficial layer in ferromagnetic components based on sub-band energy of magnetic Barkhausen noise

Di, J., He, C., Lee, Y. C. & Liu, X., 2022, 於: Nondestructive Testing and Evaluation. 37, 1, p. 41-55 15 p.

研究成果: Article › 同行評審

Quantitative Evaluation of Light Collimating for Commercial UV-LEDs Based On Analytic Collimating Lens

Syu, Y. S. & Lee, Y. C., 2022 1月 1, 於: Applied Sciences (Switzerland). 12, 2, 911.

研究成果: Article › 同行評審

開啟存取

2021

Application of a New Inversion Algorithm Based on Multi-Layer Model Hypothesis for Testing Stress-Depth Profiles by Multi-Frequency EC Method

DI, J., He, C., Lee, Y. C., Liu, X. & Shang, W., 2021 5月, 於: IEEE Transactions on Magnetics. 57, 5, 9361582.

研究成果: Article › 同行評審

Legendre orthogonal polynomial method in calculating reflection and transmission coefficients of fluid-loaded functionally gradient plates

Gao, J., Lyu, Y., Song, G., Liu, M., Zheng, M., He, C. & Lee, Y., 2021 7月, 於: Wave Motion. 104, 102754.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Maskless lithography based on oblique scanning of point array with digital distortion correction

Chien, H. L., Chiu, Y. H. & Lee, Y. C., 2021 1月, 於: Optics and Lasers in Engineering. 136, 106313.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Soft photomask lithography and droplet spreading nano-imprinting for manufacturing patterned sapphire substrates

Tu, P. C. & Lee, Y. C., 2021 3月 15, 於: Microelectronic Engineering. 241, 111528.

研究成果: Article › 同行評審

Ultraviolet Beam Lithography System for Digital Fabrication of Roller Molds

Yang, S. & Lee, Y. C., 2021 2月, 於: IEEE/ASME Transactions on Mechatronics. 26, 1, p. 226-234 9 p., 9145867.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

2020

Development of lightweight energy-saving glass and its near-field electromagnetic analysis

Chen, Y. H., Shih, F. Y., Lee, M. T., Lee, Y. C. & Chen, Y. B., 2020 2月 15, 於: Energy. 193, 116812.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Droplet spreading nanoimprinting method for micro-/nano-fabrication

Tu, P. C. & Lee, Y. C., 2020 8月, 於: Journal of Micromechanics and Microengineering. 30, 8, 085003.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Strain omnidirectional detection based on circular patch antenna

Song, G., Zhang, B., Lyu, Y., Wang, X., Wu, B., He, C. & Lee, Y. C., 2020 11月 1, 於: Sensors and Actuators, A: Physical. 315, 112275.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Three Dimensional Maskless Ultraviolet Exposure System Based on Digital Light Processing

Chien, H. L. & Lee, Y. C., 2020 5月 1, 於: International Journal of Precision Engineering and Manufacturing. 21, 5, p. 937-945 9 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Ultrasonic touch sensing system based on lamb waves and convolutional neural network

Chang, C. S. & Lee, Y. C., 2020 5月 1, 於: Sensors (Switzerland). 20, 9, 2619.

研究成果: Article › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

2019

Anti-reflection nano-structures fabricated on curved surface of glass lens based on metal contact printing lithography

Su, W. X., Wu, C. Y. & Lee, Y. C., 2019 6月 1, 於: Microelectronic Engineering. 214, p. 15-20 6 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Application of Legendre orthogonal polynomial method in calculating reflection and transmission coefficients of multilayer plates

Guorong, S., Mingkun, L., Yan, L., Yungchun, L., Bin, W. & Cunfu, H., 2019 1月, 於: Wave Motion. 84, p. 32-45 14 p.

研究成果: Article › 同行評審

15 引文斯高帕斯（Scopus）

Contact photolithography at sub-micrometer scale using a soft photomask

Wu, C. Y., Hsieh, H. & Lee, Y. C., 2019 8月 1, 於: Micromachines. 10, 8, 547.

研究成果: Article › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

Double-sided freeform lens for light collimation of light emitting diodes

Syu, Y. S., Wu, C. Y. & Lee, Y. C., 2019 12月 1, 於: Applied Sciences (Switzerland). 9, 24, 5452.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Maskless lithography based on digital micromirror device (DMD) and double sided microlens and spatial filter array

Dinh, D. H., Chien, H. L. & Lee, Y. C., 2019 5月, 於: Optics and Laser Technology. 113, p. 407-415 9 p.

研究成果: Article › 同行評審

28 引文斯高帕斯（Scopus）

Simple in-house fabrication of microwells for generating uniform hepatic multicellular cancer aggregates and discovering novel therapeutics

Chiu, C. Y., Chen, Y. C., Wu, K. W., Hsu, W. C., Lin, H. P., Chang, H. C., Lee, Y. C., Wang, Y. K. & Tu, T. Y., 2019 10月 1, 於: Materials. 12, 20, 3308.

研究成果: Article › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Step and scanning lithography for patterning seamless microstructures on the inner surface of a hollow roller

Nguyen, H. T. & Lee, Y. C., 2019 8月 27, 於: Journal of Micromechanics and Microengineering. 29, 10, 105012.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

2018

Excimer laser three-dimensional micromachining based on image projection and the optical diffraction effect

Hung, Y. H., Chien, H. L. & Lee, Y. C., 2018 9月 18, 於: Applied Sciences (Switzerland). 8, 9, 1690.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

2017

A ball valve micro-pump based on axially symmetrical nozzle fabricated by excimer laser micromachining technology

Chien, H. L. & Lee, Y. C., 2017 10月 1, 於: International Journal of Precision Engineering and Manufacturing. 18, 10, p. 1315-1320 6 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Design and fabrication of a biconvex aspherical microlens for maximizing fiber coupling efficiency with an ultraviolet laser diode

Hoque, M. U., Hasan, M. N. & Lee, Y. C., 2017 2月 1, 於: Sensors and Actuators, A: Physical. 254, p. 36-42 7 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

Maskless beam pen lithography based on integrated microlens array and spatial-filter array

Hasan, M. N., Dinh, D. H., Chien, H. L. & Lee, Y. C., 2017 11月 1, 於: Optical Engineering. 56, 11, 115104.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Sound fields radiated from a linear phased array based on analytical solutions of transient elastic waves

He, C., Zhang, X., Lu, Y., Wu, B. & Lee, Y. C., 2017 9月, 於: Wave Motion. 73, p. 86-95 10 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

Waveguide plasmon resonance of arrayed metallic nanostructures patterned on a soft substrate by direct contact printing lithography

Su, W. X., Wu, C. Y. & Lee, Y. C., 2017 8月 13, 於: Sensors (Switzerland). 17, 8, 1867.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

2016

Contact photolithography using a carbon-black embedded soft photomask and ultraviolet light emitting diodes with application on patterned sapphire substrates

Hsieh, H., Wu, C. Y. & Lee, Y. C., 2016 4月 18, 於: Optics Express. 24, 8, p. 8620-8631 12 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Deastigmatism, circularization, and focusing of a laser diode beam using a single biconvex microlens

Hasan, M. N., Haque, M. U. & Lee, Y. C., 2016 9月 1, 於: Optical Engineering. 55, 9, 095107.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Fabrication of array-analytic ultrasonic focused transducer and research of spatial-sensing method

Song, G., Qin, D., Liu, X., Lü, Y., Lee, Y., He, C. & Wu, B., 2016 1月 20, 於: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 52, 2, p. 62-69 8 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Fabrication of seamless roller mold with 3D micropatterns using inner curved surface photolithography

Tsai, S. W., Chen, P. Y., Huang, S. R. & Lee, Y. C., 2016 1月 25, 於: Microelectronic Engineering. 150, p. 19-25 7 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Non-immersive Ultrasound Scanning and Inspection of Internal Defects Using a Water Droplet Coupling Device

Kuo, C. T. & Lee, Y-C., 2016 6月 1, 於: Journal of Nondestructive Evaluation. 35, 2, 27.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Unified fabrication process for complex gratings

Ho, C. C., Chen, J. S., Lin, C. H., Lee, Y. C. & Chen, Y. B., 2016 7月 1, 於: Journal of Micro/ Nanolithography, MEMS, and MOEMS. 15, 3, 034502.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

2015

Beam pen lithography based on focused laser diode beam with single microlens fabricated by excimer laser

Hasan, M. N. & Lee, Y. C., 2015 2月 23, 於: Optics Express. 23, 4, p. 4494-4505 12 p.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Cylindrical Rayleigh surface waves on a layer-coated cylinder measured by PVDF transducer and defocusing measurement method

Lin, C. I., Lu, Y., He, C., Song, G. & Lee, Y. C., 2015 6月 4, 於: NDT and E International. 74, p. 43-49 7 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Direct-writing lithography using laser diode beam focused with single elliptical microlens

Hasan, M. N., Haque, M. U., Trisno, J. & Lee, Y. C., 2015 10月 1, 於: Journal of Micro/ Nanolithography, MEMS, and MOEMS. 14, 4, 043505.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Measurement of circumferential Lamb waves using a line-focus poly(vinylidene fluoride) transducer and cross correlation waveform analysis

Lin, C. I., Lu, Y., He, C., Song, G. & Lee, Y. C., 2015 11月 1, 於: Journal of the Acoustical Society of America. 138, 5, p. 2738-2743 6 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Tempering Hemispherical Radiative Properties with a Resonance Compilation

Chen, Y. B., Lee, Y. C., Chang, Y. F., Lin, Y. H. & Chen, P. H., 2015 6月 1, 於: Plasmonics. 10, 3, p. 595-603 9 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

2014

Acoustoelastic and acoustoplastic effects of polymethylmethacrylate measured by V( f, z) defocusing measurement system

Lin, C. I. & Lee, Y. C., 2014 4月, 於: IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 61, 4, p. 647-653 7 p., 6822991.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

A metal-embedded photo-mask for contact photolithography with application on patterned sapphire substrate

Yan, J. N., Chang, C. W. & Lee, Y. C., 2014 6月 25, 於: Microelectronic Engineering. 122, p. 20-24 5 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Apertureless beam pen lithography based on fully metal-coated polyurethane-acrylate (PUA) pyramidal microstructure array

Wu, C. Y. & Lee, Y. C., 2014, 於: Optics Express. 22, 9, p. 10593-10604 12 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

A Soft PDMS/Metal-film photo-mask for large-area contact photolithography at sub-micrometer scale with application on patterned sapphire substrates

Hsieh, Y. T. & Lee, Y. C., 2014 6月, 於: Journal of Microelectromechanical Systems. 23, 3, p. 719-726 8 p., 6617718.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

A soft photo-mask with embedded carbon black and its application in contact photolithography

Hsieh, Y. T., Hsieh, H. & Lee, Y. C., 2014 8月 1, 於: Journal of Micromechanics and Microengineering. 24, 8, 085006.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Beam pen lithography based on arrayed polydimethylsiloxane (PDMS) micro-pyramids spin-coated with carbon black photo-resist

Chen, Y. Z., Wu, C. Y. & Lee, Y. C., 2014 4月, 於: Journal of Micromechanics and Microengineering. 24, 4, 045007.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Elastic Properties Inversion of an Isotropic Plate by Hybrid Particle Swarm-Based-Simulated Annealing Optimization Technique from Leaky Lamb Wave Measurements Using Acoustic Microscopy

Yan, L., Cunfu, H., Guorong, S., Bin, W., Chung, C. H. & Lee, Y. C., 2014 10月 21, 於: Journal of Nondestructive Evaluation. 33, 4, p. 651-662 12 p.

研究成果: Article › 同行評審

15 引文斯高帕斯（Scopus）

Enhanced performance of polymer solar cells with imprinted nanostructures on the active layer

Chen, B. C., Cheng, Y. S., Gau, C. & Lee, Y. C., 2014 8月 1, 於: Thin Solid Films. 564, p. 384-389 6 p.

研究成果: Article › 同行評審

14 引文斯高帕斯（Scopus）

Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography

Tsai, S. W., Chen, P. Y. & Lee, Y-C., 2014 1月 1, 於: Journal of Micromechanics and Microengineering. 24, 4, 045022.

研究成果: Article › 同行評審

17 引文斯高帕斯（Scopus）

Fabrication of ball-strip convex microlens array using seamless roller mold patterned by curved surface lithography technique

Tsai, S. W. & Lee, Y. C., 2014 1月 1, 於: Journal of Micromechanics and Microengineering. 24, 1, 015014.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Fabrication of broadband poly(vinylidene difluoride-trifluroethylene) line-focus ultrasonic transducers for surface acoustic wave measurements of anisotropy of a (1 0 0) silicon wafer

Lu, Y., He, C., Song, G., Wu, B., Chung, C. H. & Lee, Y. C., 2014 1月, 於: Ultrasonics. 54, 1, p. 296-304 9 p.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Fabrication of three-dimensional and submicrometer-scaled microstructures based on metal contact printing and silicon bulk machining

Kao, K. L., Chang, C. W. & Lee, Y. C., 2014 4月, 於: Journal of Micro/Nanolithography, MEMS, and MOEMS. 13, 2, 023008.

研究成果: Article › 同行評審

Measurement of Acoustoelastic Effect of Rayleigh Wave in Plastically Deformed Silicon Steel Using Lensless Line-Focus Acoustic Microscopy

Lin, C. I. & Lee, Y. C., 2014 10月 21, 於: Journal of Nondestructive Evaluation. 33, 4, p. 670-675 6 p.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Measurement of cylindrical Rayleigh surface waves using line-focused PVDF transducers and defocusing measurement method

Lin, C. I. & Lee, Y-C., 2014 1月 1, 於: Ultrasonics. 54, 6, p. 1488-1494 7 p.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

李 永春

研究成果

搜尋結果

李永春