3-D FDTD design analysis of a 2.4-GHz polarization-diversity printed dipole antenna with integrated balun and polarization-switching circuit for WLAN and wireless communication applications

Huey Ru Chuang, Liang Chen Kuo

研究成果: Article同行評審

134 引文 斯高帕斯(Scopus)

摘要

Detail numerical simulation, fabrication, and experimental measurement of a 2.4-GHz polarization-diversity printed dipole antenna are presented for wireless communication applications. Two orthogonal printed dipole antennas and each with a microstrip via-hole balun feeding structure are combined and fabricated on an FR-4 printed-circuit-board substrate. A p-i-n-diode circuit is used to switch and select the desired antenna polarization. In the antenna design simulation, a full-wave method of a three-dimensional finite-difference time-domain (FDTD) method is employed to analyze the entire structure of the printed antenna including the lumped elements of the polarization-selected p-i-n diode switching circuit. The Berenger perfectly matched layer absorbing-boundary condition is used for the FDTD computation. Numerical and measured results of antenna radiation characteristics, including input standing-wave ratio, radiation patterns, and polarization diversity are presented.

原文English
頁(從 - 到)374-381
頁數8
期刊IEEE Transactions on Microwave Theory and Techniques
51
發行號2 I
DOIs
出版狀態Published - 2003 二月

All Science Journal Classification (ASJC) codes

  • 輻射
  • 凝聚態物理學
  • 電氣與電子工程

指紋

深入研究「3-D FDTD design analysis of a 2.4-GHz polarization-diversity printed dipole antenna with integrated balun and polarization-switching circuit for WLAN and wireless communication applications」主題。共同形成了獨特的指紋。

引用此