TY - GEN
T1 - A 1280 x 720 Micro-LED Display Driver with 10-Bit Current-Mode Pulse Width Modulation
AU - Lee, Pei Yi Lai
AU - Yang, Ya Wen
AU - Li, Sih Han
AU - Sun, Jian Jhih
AU - Hung, Tzu Yi
AU - Lu, Chih Wen
AU - Fang, Yen Hsiang
AU - Kuo, Wei Hung
AU - Huang, Li Chun
AU - Su, Guo Dung John
AU - Chen, Poki
N1 - Publisher Copyright:
© 2021 IEEE.
PY - 2021
Y1 - 2021
N2 - Micro-light-emitting diode (micro-LED) displays are the most promising next-generation displays that use tiny LEDs acting as pixels [1-2]. Micro-LED displays are considerably brighter than are organic LED displays, which makes micro-LED displays suitable for head-up display (HUD), virtual-reality (VR), and augmented-reality (AR) applications [3]. A mass transfer technology is used to transfer a micro-LED array from epitaxy to a Si substrate. Pulse width modulation (PWM) is generally employed to generate gray levels in these arrays [4]. Micro-LED display drivers with voltage-mode PWM have strong driving ability but poor display uniformity. By contrast, current-mode PWM is a suitable driving method for achieving display uniformity. However, for high-resolution micro-LED displays, a large number of pixels must be connected to the data line, which creates a large capacitive load on the data line. A micro-LED consumes only tens of microamperes of current; thus, designing a display driver that uses a small current to drive a high-resolution and high-frame-rate display with current-mode PWM is challenging. In this paper, a precharge scheme and a pixel circuit with two transistors and one LED (2T1D) are proposed to solve the aforementioned issue. A 1280 \times 720 micro-LED display driver with 10-bit current-mode PWM was designed and fabricated in this study. Furthermore, a micro-LED array was successfully integrated into the designed display driver chip, which verified the feasibility of the designed display driver.
AB - Micro-light-emitting diode (micro-LED) displays are the most promising next-generation displays that use tiny LEDs acting as pixels [1-2]. Micro-LED displays are considerably brighter than are organic LED displays, which makes micro-LED displays suitable for head-up display (HUD), virtual-reality (VR), and augmented-reality (AR) applications [3]. A mass transfer technology is used to transfer a micro-LED array from epitaxy to a Si substrate. Pulse width modulation (PWM) is generally employed to generate gray levels in these arrays [4]. Micro-LED display drivers with voltage-mode PWM have strong driving ability but poor display uniformity. By contrast, current-mode PWM is a suitable driving method for achieving display uniformity. However, for high-resolution micro-LED displays, a large number of pixels must be connected to the data line, which creates a large capacitive load on the data line. A micro-LED consumes only tens of microamperes of current; thus, designing a display driver that uses a small current to drive a high-resolution and high-frame-rate display with current-mode PWM is challenging. In this paper, a precharge scheme and a pixel circuit with two transistors and one LED (2T1D) are proposed to solve the aforementioned issue. A 1280 \times 720 micro-LED display driver with 10-bit current-mode PWM was designed and fabricated in this study. Furthermore, a micro-LED array was successfully integrated into the designed display driver chip, which verified the feasibility of the designed display driver.
UR - https://www.scopus.com/pages/publications/85124020737
UR - https://www.scopus.com/pages/publications/85124020737#tab=citedBy
U2 - 10.1109/A-SSCC53895.2021.9634720
DO - 10.1109/A-SSCC53895.2021.9634720
M3 - Conference contribution
AN - SCOPUS:85124020737
T3 - Proceedings - A-SSCC 2021: IEEE Asian Solid-State Circuits Conference
BT - Proceedings - A-SSCC 2021
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2021 IEEE Asian Solid-State Circuits Conference, A-SSCC 2021
Y2 - 7 November 2021 through 10 November 2021
ER -