A 2.4 GHz CMOS transceiver single-chip RF front-end for ISM-band wireless communications

Wei Ting Lee, Huey-Ru Chuang, Chun Lin Lu

研究成果: Article

1 引文 (Scopus)

摘要

The design, fabrication, and measurements of a 2.4 GHz single-chip CMOS transceiver RF front-end containing a gain-controlled low noise amplifier (LNA), a series type T/R switch, and a power amplifier, to be employed for ISM-band wireless applications is presented. The single-chip RFIC with a chip size of 1.92 × 1.10 mm 2 is fabricated with the 0.25 μm 1P5M standard CMOS process. Extensive measurements in the transmit and receive modes were performed using a FR-4 PCB test fixture which also included an IEEE 802.11b transmit spectrum mask test. The transceiver RFIC for the receiver mode exhibits a gain of 13 dB, a noise figure of 5.7 dB, an input P1dB of -5.3 dBm, and an IIP3 of 1.5 dBm. The CMOS transceiver RFIC performance demonstrated that the standard 0.25 μm CMOS process has a great potential in the transceivers for 2.4 GHz wireless communications.

原文English
頁面72-84
頁數13
49
6
專業出版物Microwave Journal
出版狀態Published - 2006 六月 1

指紋

Transceivers
Communication
Low noise amplifiers
Noise figure
Polychlorinated biphenyls
Power amplifiers
Masks
Switches
Fabrication

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

@misc{4d717ddef4dc4d80bb5038ee1c3bebb0,
title = "A 2.4 GHz CMOS transceiver single-chip RF front-end for ISM-band wireless communications",
abstract = "The design, fabrication, and measurements of a 2.4 GHz single-chip CMOS transceiver RF front-end containing a gain-controlled low noise amplifier (LNA), a series type T/R switch, and a power amplifier, to be employed for ISM-band wireless applications is presented. The single-chip RFIC with a chip size of 1.92 × 1.10 mm 2 is fabricated with the 0.25 μm 1P5M standard CMOS process. Extensive measurements in the transmit and receive modes were performed using a FR-4 PCB test fixture which also included an IEEE 802.11b transmit spectrum mask test. The transceiver RFIC for the receiver mode exhibits a gain of 13 dB, a noise figure of 5.7 dB, an input P1dB of -5.3 dBm, and an IIP3 of 1.5 dBm. The CMOS transceiver RFIC performance demonstrated that the standard 0.25 μm CMOS process has a great potential in the transceivers for 2.4 GHz wireless communications.",
author = "Lee, {Wei Ting} and Huey-Ru Chuang and Lu, {Chun Lin}",
year = "2006",
month = "6",
day = "1",
language = "English",
volume = "49",
pages = "72--84",
journal = "Microwave Journal",
issn = "0192-6225",
publisher = "Horizon House",

}

A 2.4 GHz CMOS transceiver single-chip RF front-end for ISM-band wireless communications. / Lee, Wei Ting; Chuang, Huey-Ru; Lu, Chun Lin.

於: Microwave Journal, 卷 49, 編號 6, 01.06.2006, p. 72-84.

研究成果: Article

TY - GEN

T1 - A 2.4 GHz CMOS transceiver single-chip RF front-end for ISM-band wireless communications

AU - Lee, Wei Ting

AU - Chuang, Huey-Ru

AU - Lu, Chun Lin

PY - 2006/6/1

Y1 - 2006/6/1

N2 - The design, fabrication, and measurements of a 2.4 GHz single-chip CMOS transceiver RF front-end containing a gain-controlled low noise amplifier (LNA), a series type T/R switch, and a power amplifier, to be employed for ISM-band wireless applications is presented. The single-chip RFIC with a chip size of 1.92 × 1.10 mm 2 is fabricated with the 0.25 μm 1P5M standard CMOS process. Extensive measurements in the transmit and receive modes were performed using a FR-4 PCB test fixture which also included an IEEE 802.11b transmit spectrum mask test. The transceiver RFIC for the receiver mode exhibits a gain of 13 dB, a noise figure of 5.7 dB, an input P1dB of -5.3 dBm, and an IIP3 of 1.5 dBm. The CMOS transceiver RFIC performance demonstrated that the standard 0.25 μm CMOS process has a great potential in the transceivers for 2.4 GHz wireless communications.

AB - The design, fabrication, and measurements of a 2.4 GHz single-chip CMOS transceiver RF front-end containing a gain-controlled low noise amplifier (LNA), a series type T/R switch, and a power amplifier, to be employed for ISM-band wireless applications is presented. The single-chip RFIC with a chip size of 1.92 × 1.10 mm 2 is fabricated with the 0.25 μm 1P5M standard CMOS process. Extensive measurements in the transmit and receive modes were performed using a FR-4 PCB test fixture which also included an IEEE 802.11b transmit spectrum mask test. The transceiver RFIC for the receiver mode exhibits a gain of 13 dB, a noise figure of 5.7 dB, an input P1dB of -5.3 dBm, and an IIP3 of 1.5 dBm. The CMOS transceiver RFIC performance demonstrated that the standard 0.25 μm CMOS process has a great potential in the transceivers for 2.4 GHz wireless communications.

UR - http://www.scopus.com/inward/record.url?scp=33746121877&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33746121877&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:33746121877

VL - 49

SP - 72

EP - 84

JO - Microwave Journal

JF - Microwave Journal

SN - 0192-6225

ER -