A 2.4-GHz printed meander-line antenna for WLAN applications

C. C. Lin, S. W. Kuo, H. R. Chuang

研究成果: Conference article同行評審

8 引文 斯高帕斯(Scopus)


A 2.4-GHz printed meander-line antenna for WLAN application is discussed. The space for the printed meander-line antenna is about 1cm × 2cm and the ground plate to emulate the RF board is about 5cm × 2cm. The meander shape has been tuned to resonate at GHz band. It is observed that the USB connector can be bended and the antenna on the WLAN card can have different position and orientation. The result shows that the notebook PC housing seems not possessing significant effect on the antenna patterns.

頁(從 - 到)2767-2770
期刊IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
出版狀態Published - 2004 1月 1
事件IEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting - Monterey, CA, United States
持續時間: 2004 6月 202004 6月 25

All Science Journal Classification (ASJC) codes

  • 電氣與電子工程


深入研究「A 2.4-GHz printed meander-line antenna for WLAN applications」主題。共同形成了獨特的指紋。