A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life

Kian Fu Wong, Chien-Hung Tsai

研究成果: Conference contribution

3 引文 (Scopus)

摘要

In this paper, a high efficiency and completely smooth transition between buck and boost mode, non-inverting Buck-Boost Converter with Continuity-Mode (CM) Technique is presented. The proposed continuity mode technique provides smooth transition and minimizes the switching and conduction losses better than conventional buffer mode. It just like buck or boost mode, the number of switches are used in one switching cycle is reduced from four to two and the inductor current is reduced to close to the value of load current. The results show the problem of pulse skipping in mode transition region is removed and without expense any unnecessary power losses. The dc output voltage is regulated on 3.3V in whole decreasing battery life. The output voltage ripple is reduced in transition region due to without pulse skipping and approximate to zero due to the duty cycle is close to almost 100% when the input voltage equal to output voltage.

原文English
主出版物標題2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011
頁面974-977
頁數4
DOIs
出版狀態Published - 2011 十二月 1
事件2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011 - Singapore, Singapore
持續時間: 2011 十二月 52011 十二月 8

出版系列

名字Proceedings of the International Conference on Power Electronics and Drive Systems

Other

Other2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011
國家Singapore
城市Singapore
期間11-12-0511-12-08

指紋

Switches
Electric potential

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

Wong, K. F., & Tsai, C-H. (2011). A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life. 於 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011 (頁 974-977). [6147374] (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2011.6147374
Wong, Kian Fu ; Tsai, Chien-Hung. / A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life. 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011. 2011. 頁 974-977 (Proceedings of the International Conference on Power Electronics and Drive Systems).
@inproceedings{59b3841c092e411490f11e4abd293bb8,
title = "A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life",
abstract = "In this paper, a high efficiency and completely smooth transition between buck and boost mode, non-inverting Buck-Boost Converter with Continuity-Mode (CM) Technique is presented. The proposed continuity mode technique provides smooth transition and minimizes the switching and conduction losses better than conventional buffer mode. It just like buck or boost mode, the number of switches are used in one switching cycle is reduced from four to two and the inductor current is reduced to close to the value of load current. The results show the problem of pulse skipping in mode transition region is removed and without expense any unnecessary power losses. The dc output voltage is regulated on 3.3V in whole decreasing battery life. The output voltage ripple is reduced in transition region due to without pulse skipping and approximate to zero due to the duty cycle is close to almost 100{\%} when the input voltage equal to output voltage.",
author = "Wong, {Kian Fu} and Chien-Hung Tsai",
year = "2011",
month = "12",
day = "1",
doi = "10.1109/PEDS.2011.6147374",
language = "English",
isbn = "9781612849997",
series = "Proceedings of the International Conference on Power Electronics and Drive Systems",
pages = "974--977",
booktitle = "2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011",

}

Wong, KF & Tsai, C-H 2011, A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life. 於 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011., 6147374, Proceedings of the International Conference on Power Electronics and Drive Systems, 頁 974-977, 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore, Singapore, 11-12-05. https://doi.org/10.1109/PEDS.2011.6147374

A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life. / Wong, Kian Fu; Tsai, Chien-Hung.

2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011. 2011. p. 974-977 6147374 (Proceedings of the International Conference on Power Electronics and Drive Systems).

研究成果: Conference contribution

TY - GEN

T1 - A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life

AU - Wong, Kian Fu

AU - Tsai, Chien-Hung

PY - 2011/12/1

Y1 - 2011/12/1

N2 - In this paper, a high efficiency and completely smooth transition between buck and boost mode, non-inverting Buck-Boost Converter with Continuity-Mode (CM) Technique is presented. The proposed continuity mode technique provides smooth transition and minimizes the switching and conduction losses better than conventional buffer mode. It just like buck or boost mode, the number of switches are used in one switching cycle is reduced from four to two and the inductor current is reduced to close to the value of load current. The results show the problem of pulse skipping in mode transition region is removed and without expense any unnecessary power losses. The dc output voltage is regulated on 3.3V in whole decreasing battery life. The output voltage ripple is reduced in transition region due to without pulse skipping and approximate to zero due to the duty cycle is close to almost 100% when the input voltage equal to output voltage.

AB - In this paper, a high efficiency and completely smooth transition between buck and boost mode, non-inverting Buck-Boost Converter with Continuity-Mode (CM) Technique is presented. The proposed continuity mode technique provides smooth transition and minimizes the switching and conduction losses better than conventional buffer mode. It just like buck or boost mode, the number of switches are used in one switching cycle is reduced from four to two and the inductor current is reduced to close to the value of load current. The results show the problem of pulse skipping in mode transition region is removed and without expense any unnecessary power losses. The dc output voltage is regulated on 3.3V in whole decreasing battery life. The output voltage ripple is reduced in transition region due to without pulse skipping and approximate to zero due to the duty cycle is close to almost 100% when the input voltage equal to output voltage.

UR - http://www.scopus.com/inward/record.url?scp=84857394113&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84857394113&partnerID=8YFLogxK

U2 - 10.1109/PEDS.2011.6147374

DO - 10.1109/PEDS.2011.6147374

M3 - Conference contribution

AN - SCOPUS:84857394113

SN - 9781612849997

T3 - Proceedings of the International Conference on Power Electronics and Drive Systems

SP - 974

EP - 977

BT - 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011

ER -

Wong KF, Tsai C-H. A completely smooth transition Buck-Boost Converter with Continuity-Mode (CM) Technique for only using 2 switches in whole battery life. 於 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011. 2011. p. 974-977. 6147374. (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2011.6147374