A Direct Current-Sensing VCO-Based 2nd-Order Continuous-Time Sigma-Delta Modulator for Biosensor Readout Applications

Shuenn Yuh Lee, Yi Ting Hsieh, Hao Yun Lee, Shih Shuo Chang, Ju Yi Chen

研究成果: Article同行評審

摘要

A second-order voltage-controlled oscillator (VCO)based continuous-time sigma-delta modulator (CTSDM) for current-sensing readout applications is proposed. Current signals from the sensor can directly be quantized by the proposed VCO-based CTSDM, which does not require any extra trans-impedance amplifiers. With the proportional-integral (PI) structure and a VCO phase integrator, the capability of second-order noise shaping is available to reduce the in-band quantization noise. The PI structure can be simply realized by a resistor in series with the integrating capacitor, which can reduce the architecture complexity and maintain the stability of the system. The current-steering digital-to-analog converter with tail and sink current sources is used on the feedback path for the subtraction of the current-type input signal. All the components of the circuit are scaling friendly and applicable to current-sensing readout applications in the Internet of Things (IoT). The proposed VCO-based CTSDM implemented in a 0.18-µm standard CMOS process has a measured signal-to-noise and distortion ratio (SNDR) of 74.6 dB at 10 kHz bandwidth and consumes 44.8 µw only under a supply voltage of 1.2 V, which can achieve a Figure-of-Merit (FoM) of 160.76 dB.

原文English
文章編號10274113
頁(從 - 到)288-298
頁數11
期刊IEEE transactions on biomedical circuits and systems
18
發行號2
DOIs
出版狀態Published - 2024 4月 1

All Science Journal Classification (ASJC) codes

  • 生物醫學工程
  • 電氣與電子工程

指紋

深入研究「A Direct Current-Sensing VCO-Based 2nd-Order Continuous-Time Sigma-Delta Modulator for Biosensor Readout Applications」主題。共同形成了獨特的指紋。

引用此