A fast-transient quasi-V\bf 2 switching buck regulator using AOT control with a load current correction (LCC) technique

Chien Hung Tsai, Shih Mei Lin, Chun Sheng Huang

研究成果: Article同行評審

37 引文 斯高帕斯(Scopus)


A switching regulator with quasi-V2 adaptive on-time (AOT) control that provides a fast load transient response is proposed in this paper. The feed-forward path network allows the proposed switching regulator to achieve a fast transient response and stable operation without requiring an output capacitor with large equivalent series resistance. The proposed adaptive on-time controller makes the switching frequency pseudofixed in the continuous conduction mode and works in the pulse-frequency modulation mode under ultralight-load conditions to maintain the conversion efficiency. The AOT controller adjusts the on-time according to the supply voltage and load current conditions. The measurement results verify that the switching regulator can operate under load current between 5 and 800 mA for the supply voltage of 3.3-4.2 V and an output voltage of 1.2 V. The recovery time is 3.6 μs and the voltage drop is 75 mV when the load current is increased from 5 to 750 mA.

頁(從 - 到)3949-3957
期刊IEEE Transactions on Power Electronics
出版狀態Published - 2013 一月 31

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

指紋 深入研究「A fast-transient quasi-V<sup>\bf 2</sup> switching buck regulator using AOT control with a load current correction (LCC) technique」主題。共同形成了獨特的指紋。