A general design method for electric machines using magnetic circuit model considering the flux saturation problem

You Chiuan Hsu, Min-Fu Hsieh, Richard A. McMahon

研究成果: Conference contribution

2 引文 (Scopus)

摘要

This paper proposes an analytical approach that is generalized for the design of various types of electric machines based on a physical magnetic circuit model. Conventional approaches have been used to predict the behavior of electric machines but have limitations in accurate flux saturation analysis and hence machine dimensioning at the initial design stage. In particular, magnetic saturation is generally ignored or compensated by correction factors in simplified models since it is difficult to determine the flux in each stator tooth for machines with any slot-pole combinations. In this paper, the flux produced by stator winding currents can be calculated accurately and rapidly for each stator tooth using the developed model, taking saturation into account. This aids machine dimensioning without the need for a computationally expensive finite element analysis (FEA). A 48-slot machine operated in induction and doubly-fed modes is used to demonstrate the proposed model. FEA is employed for verification.

原文English
主出版物標題2009 International Conference on Power Electronics and Drive Systems, PEDS 2009
頁面625-630
頁數6
DOIs
出版狀態Published - 2009 十二月 1
事件2009 International Conference on Power Electronics and Drive Systems, PEDS 2009 - Taipei, Taiwan
持續時間: 2009 一月 22009 一月 5

出版系列

名字Proceedings of the International Conference on Power Electronics and Drive Systems

Other

Other2009 International Conference on Power Electronics and Drive Systems, PEDS 2009
國家Taiwan
城市Taipei
期間09-01-0209-01-05

指紋

Electric machinery
Magnetic circuits
Fluxes
Stators
Finite element method
Saturation magnetization
Poles

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

Hsu, Y. C., Hsieh, M-F., & McMahon, R. A. (2009). A general design method for electric machines using magnetic circuit model considering the flux saturation problem. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009 (頁 625-630). [5385860] (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2009.5385860
Hsu, You Chiuan ; Hsieh, Min-Fu ; McMahon, Richard A. / A general design method for electric machines using magnetic circuit model considering the flux saturation problem. 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. 頁 625-630 (Proceedings of the International Conference on Power Electronics and Drive Systems).
@inproceedings{8a291593df584cd5af8ed29b49ffc9aa,
title = "A general design method for electric machines using magnetic circuit model considering the flux saturation problem",
abstract = "This paper proposes an analytical approach that is generalized for the design of various types of electric machines based on a physical magnetic circuit model. Conventional approaches have been used to predict the behavior of electric machines but have limitations in accurate flux saturation analysis and hence machine dimensioning at the initial design stage. In particular, magnetic saturation is generally ignored or compensated by correction factors in simplified models since it is difficult to determine the flux in each stator tooth for machines with any slot-pole combinations. In this paper, the flux produced by stator winding currents can be calculated accurately and rapidly for each stator tooth using the developed model, taking saturation into account. This aids machine dimensioning without the need for a computationally expensive finite element analysis (FEA). A 48-slot machine operated in induction and doubly-fed modes is used to demonstrate the proposed model. FEA is employed for verification.",
author = "Hsu, {You Chiuan} and Min-Fu Hsieh and McMahon, {Richard A.}",
year = "2009",
month = "12",
day = "1",
doi = "10.1109/PEDS.2009.5385860",
language = "English",
isbn = "9781424441662",
series = "Proceedings of the International Conference on Power Electronics and Drive Systems",
pages = "625--630",
booktitle = "2009 International Conference on Power Electronics and Drive Systems, PEDS 2009",

}

Hsu, YC, Hsieh, M-F & McMahon, RA 2009, A general design method for electric machines using magnetic circuit model considering the flux saturation problem. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009., 5385860, Proceedings of the International Conference on Power Electronics and Drive Systems, 頁 625-630, 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009, Taipei, Taiwan, 09-01-02. https://doi.org/10.1109/PEDS.2009.5385860

A general design method for electric machines using magnetic circuit model considering the flux saturation problem. / Hsu, You Chiuan; Hsieh, Min-Fu; McMahon, Richard A.

2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. p. 625-630 5385860 (Proceedings of the International Conference on Power Electronics and Drive Systems).

研究成果: Conference contribution

TY - GEN

T1 - A general design method for electric machines using magnetic circuit model considering the flux saturation problem

AU - Hsu, You Chiuan

AU - Hsieh, Min-Fu

AU - McMahon, Richard A.

PY - 2009/12/1

Y1 - 2009/12/1

N2 - This paper proposes an analytical approach that is generalized for the design of various types of electric machines based on a physical magnetic circuit model. Conventional approaches have been used to predict the behavior of electric machines but have limitations in accurate flux saturation analysis and hence machine dimensioning at the initial design stage. In particular, magnetic saturation is generally ignored or compensated by correction factors in simplified models since it is difficult to determine the flux in each stator tooth for machines with any slot-pole combinations. In this paper, the flux produced by stator winding currents can be calculated accurately and rapidly for each stator tooth using the developed model, taking saturation into account. This aids machine dimensioning without the need for a computationally expensive finite element analysis (FEA). A 48-slot machine operated in induction and doubly-fed modes is used to demonstrate the proposed model. FEA is employed for verification.

AB - This paper proposes an analytical approach that is generalized for the design of various types of electric machines based on a physical magnetic circuit model. Conventional approaches have been used to predict the behavior of electric machines but have limitations in accurate flux saturation analysis and hence machine dimensioning at the initial design stage. In particular, magnetic saturation is generally ignored or compensated by correction factors in simplified models since it is difficult to determine the flux in each stator tooth for machines with any slot-pole combinations. In this paper, the flux produced by stator winding currents can be calculated accurately and rapidly for each stator tooth using the developed model, taking saturation into account. This aids machine dimensioning without the need for a computationally expensive finite element analysis (FEA). A 48-slot machine operated in induction and doubly-fed modes is used to demonstrate the proposed model. FEA is employed for verification.

UR - http://www.scopus.com/inward/record.url?scp=77950904663&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77950904663&partnerID=8YFLogxK

U2 - 10.1109/PEDS.2009.5385860

DO - 10.1109/PEDS.2009.5385860

M3 - Conference contribution

AN - SCOPUS:77950904663

SN - 9781424441662

T3 - Proceedings of the International Conference on Power Electronics and Drive Systems

SP - 625

EP - 630

BT - 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009

ER -

Hsu YC, Hsieh M-F, McMahon RA. A general design method for electric machines using magnetic circuit model considering the flux saturation problem. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. p. 625-630. 5385860. (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2009.5385860