A K- To Ka-band broadband doubly balanced monolithic ring mixer

Hung Chih Chuang; Chih Ming Lin; Che Hung Lin; Yeong Her Wang

doi:10.1109/LMWC.2008.922648

A K- To Ka-band broadband doubly balanced monolithic ring mixer

Hung Chih Chuang, Chih Ming Lin, Che Hung Lin, Yeong Her Wang

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

摘要

A broadband doubly balanced monolithic ring mixer with a new intermediate frequency (IF) signal extraction method implemented by 0.15 μm pHEMT process is presented. The hybrid couplers of the proposed mixer consist of multiple coupled lines and fourfold coupled line Marchand baluns. The use of multiple coupled lines leads to a die size less than 1×1 mm ² and improves the bandwidth of the mixer. The novel fourfold coupled line allows the extraction of the IF signal directly without any extra low pass filter circuits. The mixer exhibited 8-13 dB conversion loss, high radio frequency/local oscillation isolation of 35-50 dB over 16-40 GHz and an input 1-dB compression point of 14 dBm.

原文	English
文章編號	4530632
頁（從 - 到）	401-403
頁數	3
期刊	IEEE Microwave and Wireless Components Letters
卷	18
發行號	6
DOIs	https://doi.org/10.1109/LMWC.2008.922648
出版狀態	Published - 2008 6月

All Science Journal Classification (ASJC) codes

凝聚態物理學
電氣與電子工程

存取文件

10.1109/LMWC.2008.922648

其它文件與鏈接

引用此

@article{2af1a81c6a5f4f939cc37c4fecdce397,

title = "A K- To Ka-band broadband doubly balanced monolithic ring mixer",

abstract = "A broadband doubly balanced monolithic ring mixer with a new intermediate frequency (IF) signal extraction method implemented by 0.15 μm pHEMT process is presented. The hybrid couplers of the proposed mixer consist of multiple coupled lines and fourfold coupled line Marchand baluns. The use of multiple coupled lines leads to a die size less than 1×1 mm 2 and improves the bandwidth of the mixer. The novel fourfold coupled line allows the extraction of the IF signal directly without any extra low pass filter circuits. The mixer exhibited 8-13 dB conversion loss, high radio frequency/local oscillation isolation of 35-50 dB over 16-40 GHz and an input 1-dB compression point of 14 dBm.",

author = "Chuang, {Hung Chih} and Lin, {Chih Ming} and Lin, {Che Hung} and Wang, {Yeong Her}",

note = "Funding Information: Manuscript received December 9, 2007; revised January 5, 2008. This work was supported in part by the National Chip Implementation Center, National Applied Research Laboratories, and the National Science Council of Taiwan, R.O.C., under Contract NSC 95-2215-E-006-428-MY3, and by the Foundation of Chen, Jieh-Chen Scholarship, Tainan, Taiwan.",

year = "2008",

month = jun,

doi = "10.1109/LMWC.2008.922648",

language = "English",

volume = "18",

pages = "401--403",

journal = "IEEE Microwave and Wireless Components Letters",

issn = "1531-1309",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "6",

}

TY - JOUR

T1 - A K- To Ka-band broadband doubly balanced monolithic ring mixer

AU - Chuang, Hung Chih

AU - Lin, Chih Ming

AU - Lin, Che Hung

AU - Wang, Yeong Her

N1 - Funding Information: Manuscript received December 9, 2007; revised January 5, 2008. This work was supported in part by the National Chip Implementation Center, National Applied Research Laboratories, and the National Science Council of Taiwan, R.O.C., under Contract NSC 95-2215-E-006-428-MY3, and by the Foundation of Chen, Jieh-Chen Scholarship, Tainan, Taiwan.

PY - 2008/6

Y1 - 2008/6

N2 - A broadband doubly balanced monolithic ring mixer with a new intermediate frequency (IF) signal extraction method implemented by 0.15 μm pHEMT process is presented. The hybrid couplers of the proposed mixer consist of multiple coupled lines and fourfold coupled line Marchand baluns. The use of multiple coupled lines leads to a die size less than 1×1 mm 2 and improves the bandwidth of the mixer. The novel fourfold coupled line allows the extraction of the IF signal directly without any extra low pass filter circuits. The mixer exhibited 8-13 dB conversion loss, high radio frequency/local oscillation isolation of 35-50 dB over 16-40 GHz and an input 1-dB compression point of 14 dBm.

AB - A broadband doubly balanced monolithic ring mixer with a new intermediate frequency (IF) signal extraction method implemented by 0.15 μm pHEMT process is presented. The hybrid couplers of the proposed mixer consist of multiple coupled lines and fourfold coupled line Marchand baluns. The use of multiple coupled lines leads to a die size less than 1×1 mm 2 and improves the bandwidth of the mixer. The novel fourfold coupled line allows the extraction of the IF signal directly without any extra low pass filter circuits. The mixer exhibited 8-13 dB conversion loss, high radio frequency/local oscillation isolation of 35-50 dB over 16-40 GHz and an input 1-dB compression point of 14 dBm.

UR - http://www.scopus.com/inward/record.url?scp=45149133991&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=45149133991&partnerID=8YFLogxK

U2 - 10.1109/LMWC.2008.922648

DO - 10.1109/LMWC.2008.922648

M3 - Article

AN - SCOPUS:45149133991

SN - 1531-1309

VL - 18

SP - 401

EP - 403

JO - IEEE Microwave and Wireless Components Letters

JF - IEEE Microwave and Wireless Components Letters

IS - 6

M1 - 4530632

ER -

A K- To Ka-band broadband doubly balanced monolithic ring mixer

摘要

All Science Journal Classification (ASJC) codes

存取文件

其它文件與鏈接

指紋

引用此