A light energy harvesting single-inductor dual-input dual-output converter for WSN

Peng Chang Huang, Tai-Haur Kuo

研究成果: Conference contribution

摘要

A single-inductor dual-input dual-output (SIDIDO) converter is proposed for power management among photovoltaic (PV) module, storage element, and load in light energy harvesting systems. Low power maximum power point tracking (MPPT) and voltage regulation circuits are realized to harvest maximum power from a PV module and provide a regulated voltage for load. The chip including the SIDIDO converter and the control circuits are fabricated in 0.5μm CMOS process with 0.5mm2active area. The measured peak conversion efficiency is 93%, while the measured quiescent current is 1μA. Moreover, for wireless sensor node applications, an RF transceiver supplied by a light energy system with proposed IC is also measured.

原文English
主出版物標題2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019
發行者Institute of Electrical and Electronics Engineers Inc.
ISBN(電子)9781728106557
DOIs
出版狀態Published - 2019 四月 1
事件2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019 - Hsinchu, Taiwan
持續時間: 2019 四月 222019 四月 25

出版系列

名字2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019

Conference

Conference2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019
國家Taiwan
城市Hsinchu
期間19-04-2219-04-25

指紋

Energy harvesting
inductors
converters
modules
Networks (circuits)
output
transmitter receivers
electric potential
Transceivers
Sensor nodes
Voltage control
Conversion efficiency
CMOS
chips
energy
sensors
Electric potential
Power management

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Safety, Risk, Reliability and Quality
  • Instrumentation
  • Computer Networks and Communications
  • Hardware and Architecture

引用此文

Huang, P. C., & Kuo, T-H. (2019). A light energy harvesting single-inductor dual-input dual-output converter for WSN. 於 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019 [8742058] (2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/VLSI-DAT.2019.8742058
Huang, Peng Chang ; Kuo, Tai-Haur. / A light energy harvesting single-inductor dual-input dual-output converter for WSN. 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019).
@inproceedings{d86f073b421345eab5aee79a867c6858,
title = "A light energy harvesting single-inductor dual-input dual-output converter for WSN",
abstract = "A single-inductor dual-input dual-output (SIDIDO) converter is proposed for power management among photovoltaic (PV) module, storage element, and load in light energy harvesting systems. Low power maximum power point tracking (MPPT) and voltage regulation circuits are realized to harvest maximum power from a PV module and provide a regulated voltage for load. The chip including the SIDIDO converter and the control circuits are fabricated in 0.5μm CMOS process with 0.5mm2active area. The measured peak conversion efficiency is 93{\%}, while the measured quiescent current is 1μA. Moreover, for wireless sensor node applications, an RF transceiver supplied by a light energy system with proposed IC is also measured.",
author = "Huang, {Peng Chang} and Tai-Haur Kuo",
year = "2019",
month = "4",
day = "1",
doi = "10.1109/VLSI-DAT.2019.8742058",
language = "English",
series = "2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
booktitle = "2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019",
address = "United States",

}

Huang, PC & Kuo, T-H 2019, A light energy harvesting single-inductor dual-input dual-output converter for WSN. 於 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019., 8742058, 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019, Institute of Electrical and Electronics Engineers Inc., 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019, Hsinchu, Taiwan, 19-04-22. https://doi.org/10.1109/VLSI-DAT.2019.8742058

A light energy harvesting single-inductor dual-input dual-output converter for WSN. / Huang, Peng Chang; Kuo, Tai-Haur.

2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8742058 (2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019).

研究成果: Conference contribution

TY - GEN

T1 - A light energy harvesting single-inductor dual-input dual-output converter for WSN

AU - Huang, Peng Chang

AU - Kuo, Tai-Haur

PY - 2019/4/1

Y1 - 2019/4/1

N2 - A single-inductor dual-input dual-output (SIDIDO) converter is proposed for power management among photovoltaic (PV) module, storage element, and load in light energy harvesting systems. Low power maximum power point tracking (MPPT) and voltage regulation circuits are realized to harvest maximum power from a PV module and provide a regulated voltage for load. The chip including the SIDIDO converter and the control circuits are fabricated in 0.5μm CMOS process with 0.5mm2active area. The measured peak conversion efficiency is 93%, while the measured quiescent current is 1μA. Moreover, for wireless sensor node applications, an RF transceiver supplied by a light energy system with proposed IC is also measured.

AB - A single-inductor dual-input dual-output (SIDIDO) converter is proposed for power management among photovoltaic (PV) module, storage element, and load in light energy harvesting systems. Low power maximum power point tracking (MPPT) and voltage regulation circuits are realized to harvest maximum power from a PV module and provide a regulated voltage for load. The chip including the SIDIDO converter and the control circuits are fabricated in 0.5μm CMOS process with 0.5mm2active area. The measured peak conversion efficiency is 93%, while the measured quiescent current is 1μA. Moreover, for wireless sensor node applications, an RF transceiver supplied by a light energy system with proposed IC is also measured.

UR - http://www.scopus.com/inward/record.url?scp=85068599802&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85068599802&partnerID=8YFLogxK

U2 - 10.1109/VLSI-DAT.2019.8742058

DO - 10.1109/VLSI-DAT.2019.8742058

M3 - Conference contribution

AN - SCOPUS:85068599802

T3 - 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019

BT - 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Huang PC, Kuo T-H. A light energy harvesting single-inductor dual-input dual-output converter for WSN. 於 2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8742058. (2019 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2019). https://doi.org/10.1109/VLSI-DAT.2019.8742058