TY - JOUR

T1 - A mathematical model for the mixed lubrication of non-conformable contacts with asperity friction, plastic deformation, flash temperature, and Tribo-chemistry

AU - Chang, L.

AU - Jeng, Yeau Ren

PY - 2014/4

Y1 - 2014/4

N2 - A mathematical model is presented in this paper for rolling-sliding contacts operating in a mixed regime of elastohydrodynamic lubrication and boundary lubrication. The model is based on the framework of Johnson et al. (1972, "A Simple Theory of Asperity Contacts in Elastohydrodynamic Lubrication," Wear, 19, pp. 91-108). It incorporates into this framework a number of important asperity-level variables including asperity friction, friction-induced plastic flow, flash temperature, and boundary-film tribo-chemistry. The model yields a number of variables useful for the assessment of the state of the mixed lubrication. They include the load sharing between fluid and asperities, area of asperity contacts, and fraction area of asperity contacts undergoing plastic flow along with experimentally measurable variables such as the traction coefficient, friction power intensity, and temperature of the overall contact. The model is limited to mixed-lubrication problems in which the load is mainly carried by the fluid pressure and the total area of asperity contacts is a small percentage of the Hertz area. Further development is possible to formulate a model into a wider mixed-lubrication regime using some modeling concepts developed in this paper in conjunction with other modeling techniques.

AB - A mathematical model is presented in this paper for rolling-sliding contacts operating in a mixed regime of elastohydrodynamic lubrication and boundary lubrication. The model is based on the framework of Johnson et al. (1972, "A Simple Theory of Asperity Contacts in Elastohydrodynamic Lubrication," Wear, 19, pp. 91-108). It incorporates into this framework a number of important asperity-level variables including asperity friction, friction-induced plastic flow, flash temperature, and boundary-film tribo-chemistry. The model yields a number of variables useful for the assessment of the state of the mixed lubrication. They include the load sharing between fluid and asperities, area of asperity contacts, and fraction area of asperity contacts undergoing plastic flow along with experimentally measurable variables such as the traction coefficient, friction power intensity, and temperature of the overall contact. The model is limited to mixed-lubrication problems in which the load is mainly carried by the fluid pressure and the total area of asperity contacts is a small percentage of the Hertz area. Further development is possible to formulate a model into a wider mixed-lubrication regime using some modeling concepts developed in this paper in conjunction with other modeling techniques.

UR - http://www.scopus.com/inward/record.url?scp=84894679730&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894679730&partnerID=8YFLogxK

U2 - 10.1115/1.4026589

DO - 10.1115/1.4026589

M3 - Article

AN - SCOPUS:84894679730

VL - 136

JO - Journal of Tribology

JF - Journal of Tribology

SN - 0742-4787

IS - 2

M1 - 022301

ER -