A new tracking method with FPGA chip for ultrasonic welding system

Kai Hsing Ma, Wen Chung Chang, Yung-Chun Lee

研究成果: Conference contribution

摘要

A new feedback control method of using field-programmable gate array (FPGA) chip for ultrasound welding system is appeared in this article. This feedback control circuits of ultrasound welding system consists of microprocessor control unit, signal generator, power amplifier, the feedback of voltage detector and current detector, etc. The experimental results exhibited this feedback control method can effectively and automatically catch frequency and rack a proper frequency for the ultrasound welding system.

原文English
主出版物標題2009 International Conference on Power Electronics and Drive Systems, PEDS 2009
頁面369-370
頁數2
DOIs
出版狀態Published - 2009 十二月 1
事件2009 International Conference on Power Electronics and Drive Systems, PEDS 2009 - Taipei, Taiwan
持續時間: 2009 十一月 22009 十一月 5

出版系列

名字Proceedings of the International Conference on Power Electronics and Drive Systems

Other

Other2009 International Conference on Power Electronics and Drive Systems, PEDS 2009
國家Taiwan
城市Taipei
期間09-11-0209-11-05

指紋

Ultrasonic welding
Feedback control
Field programmable gate arrays (FPGA)
Welding
Ultrasonics
Detectors
Signal generators
Power amplifiers
Microprocessor chips
Feedback
Networks (circuits)
Electric potential

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

Ma, K. H., Chang, W. C., & Lee, Y-C. (2009). A new tracking method with FPGA chip for ultrasonic welding system. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009 (頁 369-370). [5385839] (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2009.5385839
Ma, Kai Hsing ; Chang, Wen Chung ; Lee, Yung-Chun. / A new tracking method with FPGA chip for ultrasonic welding system. 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. 頁 369-370 (Proceedings of the International Conference on Power Electronics and Drive Systems).
@inproceedings{c601b99568cc4e70a6bf9e44a8bdbe11,
title = "A new tracking method with FPGA chip for ultrasonic welding system",
abstract = "A new feedback control method of using field-programmable gate array (FPGA) chip for ultrasound welding system is appeared in this article. This feedback control circuits of ultrasound welding system consists of microprocessor control unit, signal generator, power amplifier, the feedback of voltage detector and current detector, etc. The experimental results exhibited this feedback control method can effectively and automatically catch frequency and rack a proper frequency for the ultrasound welding system.",
author = "Ma, {Kai Hsing} and Chang, {Wen Chung} and Yung-Chun Lee",
year = "2009",
month = "12",
day = "1",
doi = "10.1109/PEDS.2009.5385839",
language = "English",
isbn = "9781424441662",
series = "Proceedings of the International Conference on Power Electronics and Drive Systems",
pages = "369--370",
booktitle = "2009 International Conference on Power Electronics and Drive Systems, PEDS 2009",

}

Ma, KH, Chang, WC & Lee, Y-C 2009, A new tracking method with FPGA chip for ultrasonic welding system. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009., 5385839, Proceedings of the International Conference on Power Electronics and Drive Systems, 頁 369-370, 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009, Taipei, Taiwan, 09-11-02. https://doi.org/10.1109/PEDS.2009.5385839

A new tracking method with FPGA chip for ultrasonic welding system. / Ma, Kai Hsing; Chang, Wen Chung; Lee, Yung-Chun.

2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. p. 369-370 5385839 (Proceedings of the International Conference on Power Electronics and Drive Systems).

研究成果: Conference contribution

TY - GEN

T1 - A new tracking method with FPGA chip for ultrasonic welding system

AU - Ma, Kai Hsing

AU - Chang, Wen Chung

AU - Lee, Yung-Chun

PY - 2009/12/1

Y1 - 2009/12/1

N2 - A new feedback control method of using field-programmable gate array (FPGA) chip for ultrasound welding system is appeared in this article. This feedback control circuits of ultrasound welding system consists of microprocessor control unit, signal generator, power amplifier, the feedback of voltage detector and current detector, etc. The experimental results exhibited this feedback control method can effectively and automatically catch frequency and rack a proper frequency for the ultrasound welding system.

AB - A new feedback control method of using field-programmable gate array (FPGA) chip for ultrasound welding system is appeared in this article. This feedback control circuits of ultrasound welding system consists of microprocessor control unit, signal generator, power amplifier, the feedback of voltage detector and current detector, etc. The experimental results exhibited this feedback control method can effectively and automatically catch frequency and rack a proper frequency for the ultrasound welding system.

UR - http://www.scopus.com/inward/record.url?scp=77950889360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77950889360&partnerID=8YFLogxK

U2 - 10.1109/PEDS.2009.5385839

DO - 10.1109/PEDS.2009.5385839

M3 - Conference contribution

AN - SCOPUS:77950889360

SN - 9781424441662

T3 - Proceedings of the International Conference on Power Electronics and Drive Systems

SP - 369

EP - 370

BT - 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009

ER -

Ma KH, Chang WC, Lee Y-C. A new tracking method with FPGA chip for ultrasonic welding system. 於 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009. 2009. p. 369-370. 5385839. (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2009.5385839