A report on the design and construction of sumbox: A level 1 trigger for CDF at fermilab

Yeong-Dong Tsai, Myron Campbell

研究成果: Article同行評審

摘要

Sumbox is the end point of level 1 calorimetry trigger at the Collider Detector at Fermilab (CDF), though the final level 1 decision is made by another logic board which considers both calorimetry triggers and other triggers. The total energies (linear or weighted) deposited on the entire detector are summed here, and compared with preset thresholds to make level 1 calorimetry decisions. Sumbox is a fastbus slave implemented with geographical and logical addressing, secondary address and random data cycles, and various responses to incorrect internal addresses and imprudent accesses. Its summing and comparing can be fully tested via fastbus.

原文English
頁(從 - 到)922-924
頁數3
期刊IEEE Transactions on Nuclear Science
33
發行號1
DOIs
出版狀態Published - 1986

All Science Journal Classification (ASJC) codes

  • 核能與工程
  • 電氣與電子工程
  • 核能與高能物理

指紋

深入研究「A report on the design and construction of sumbox: A level 1 trigger for CDF at fermilab」主題。共同形成了獨特的指紋。

引用此