A special boundary element for holes/cracks in composite laminates under coupled stretching-bending deformation

Chia Wen Hsu, Chyanbin Hwu

研究成果: Article同行評審

6 引文 斯高帕斯(Scopus)

摘要

Recently, we corrected the Green's functions for holes/cracks in composite laminates under coupled stretching-bending deformation. Through these corrected Green's functions, the fundamental solutions required for the special boundary element of holes/cracks in composite laminates are derived. By the use of dual coordinates, the derived fundamental solutions can be further applied to the cases of inclined holes and cracks. Moreover, a formula evaluating the stress intensity factors by using boundary nodal displacements and tractions is derived. With these closed-form solutions, the special boundary element developed in this study can deal with various kinds of hole/crack problems in composite laminates. Their loads can be in-plane tension, compression, or shearing, out-of-plane force, bending or twisting, distributed or concentrated, on the surfaces or along the edges; their boundaries can be simply supported, clamped, or free edges; their defects can be a hole or a crack with horizontal or inclined orientation; their laminates can be symmetric or unsymmetric. No matter which kind of conditions, no meshes are required on the hole and crack surfaces. And the stress intensity factors of cracks can be calculated directly without requiring any meshes along the crack surfaces or near the crack tip.

原文English
頁(從 - 到)30-48
頁數19
期刊Engineering Analysis with Boundary Elements
133
DOIs
出版狀態Published - 2021 12月 1

All Science Journal Classification (ASJC) codes

  • 分析
  • 一般工程
  • 計算數學
  • 應用數學

指紋

深入研究「A special boundary element for holes/cracks in composite laminates under coupled stretching-bending deformation」主題。共同形成了獨特的指紋。

引用此