A study on the breakup of a rotating liquid jet

C. C. Chang, C. K. Chen, T. H. Lin

研究成果: Paper同行評審

摘要

The breakup process of a rotating liquid jet was experimentally studied by varying the jet velocity and the rotation speed. In this study, we found out that the imposed rotation would shorten the breakup length of a liquid jet due to its extra disturbance. On the other hand, hysteresis behavior occurred during the use of relatively large nozzle diameter, which indicated that the critical flow rate of the transition from dripping to jetting (DJ) is different from that from jetting to dripping (JD). Consequently, we further analyzed the critical rotating speed (JD) and the critical flow rate (DJ) in this hysteresis zone. As for the last part of this study, once the breakup patterns had been deducted, we could divide the breakup modes into three distinguishable patterns basically by how the droplets formed, steady formation (single droplet), satellite droplet, and multi-position necking, respectively. Lastly, the mutual interaction between these three patterns and how the rotation affected the outcomes of a liquid jet were determined in this research.

原文English
出版狀態Published - 2020
事件14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018 - Chicago, United States
持續時間: 2018 七月 222018 七月 26

Conference

Conference14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018
國家/地區United States
城市Chicago
期間18-07-2218-07-26

All Science Journal Classification (ASJC) codes

  • 表面、塗料和薄膜

指紋

深入研究「A study on the breakup of a rotating liquid jet」主題。共同形成了獨特的指紋。

引用此