A time-based potentiostat for wide dynamic range current measurement

Wei Chiun Liu; Jen Wei Hou; Yu Sin Syu; Bin-Da Liu; Chia-Ling Wei

doi:10.1109/TENCON.2015.7372816

A time-based potentiostat for wide dynamic range current measurement

Wei Chiun Liu, Jen Wei Hou, Yu Sin Syu, Bin-Da Liu, Chia-Ling Wei

電機工程學系

研究成果: Conference contribution

摘要

This study proposes a circuit architecture suitable for designing a wide dynamic range current-to-time converter, and suitable for potentiostat design meeting different requirements. Therefore, this study provides an efficient way to make trade-offs among the parameters, such as dynamic range, sampling frequency, resolution, power dissipation, and chip area. A time-based potentiostat for wide dynamic range current measurement is presented. The proposed design is characterized through post-layout simulation, showing a wide dynamic input current range of 126 dB (1 nA-2 mA), and the resolution at the minimum current range is smaller than 10 pA. The sampling frequency of the circuit is 1 kHz, and the minimum power dissipation is only 12 μW.

原文	English
主出版物標題	TENCON 2015 - 2015 IEEE Region 10 Conference
發行者	Institute of Electrical and Electronics Engineers Inc.
卷	2016-January
ISBN（電子）	9781479986415
DOIs	https://doi.org/10.1109/TENCON.2015.7372816
出版狀態	Published - 2016 1月 5
事件	35th IEEE Region 10 Conference, TENCON 2015 - Macau, Macao 持續時間: 2015 11月 1 → 2015 11月 4

Other

Other	35th IEEE Region 10 Conference, TENCON 2015
國家/地區	Macao
城市	Macau
期間	15-11-01 → 15-11-04

All Science Journal Classification (ASJC) codes

電腦科學應用
電氣與電子工程

存取文件

10.1109/TENCON.2015.7372816

其它文件與鏈接

引用此

@inproceedings{e9482327ad5549ea95c32fe27153d5f9,

title = "A time-based potentiostat for wide dynamic range current measurement",

abstract = "This study proposes a circuit architecture suitable for designing a wide dynamic range current-to-time converter, and suitable for potentiostat design meeting different requirements. Therefore, this study provides an efficient way to make trade-offs among the parameters, such as dynamic range, sampling frequency, resolution, power dissipation, and chip area. A time-based potentiostat for wide dynamic range current measurement is presented. The proposed design is characterized through post-layout simulation, showing a wide dynamic input current range of 126 dB (1 nA-2 mA), and the resolution at the minimum current range is smaller than 10 pA. The sampling frequency of the circuit is 1 kHz, and the minimum power dissipation is only 12 μW.",

author = "Liu, {Wei Chiun} and Hou, {Jen Wei} and Syu, {Yu Sin} and Bin-Da Liu and Chia-Ling Wei",

year = "2016",

month = jan,

day = "5",

doi = "10.1109/TENCON.2015.7372816",

language = "English",

volume = "2016-January",

booktitle = "TENCON 2015 - 2015 IEEE Region 10 Conference",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "35th IEEE Region 10 Conference, TENCON 2015 ; Conference date: 01-11-2015 Through 04-11-2015",

}

TY - GEN

T1 - A time-based potentiostat for wide dynamic range current measurement

AU - Liu, Wei Chiun

AU - Hou, Jen Wei

AU - Syu, Yu Sin

AU - Liu, Bin-Da

AU - Wei, Chia-Ling

PY - 2016/1/5

Y1 - 2016/1/5

N2 - This study proposes a circuit architecture suitable for designing a wide dynamic range current-to-time converter, and suitable for potentiostat design meeting different requirements. Therefore, this study provides an efficient way to make trade-offs among the parameters, such as dynamic range, sampling frequency, resolution, power dissipation, and chip area. A time-based potentiostat for wide dynamic range current measurement is presented. The proposed design is characterized through post-layout simulation, showing a wide dynamic input current range of 126 dB (1 nA-2 mA), and the resolution at the minimum current range is smaller than 10 pA. The sampling frequency of the circuit is 1 kHz, and the minimum power dissipation is only 12 μW.

AB - This study proposes a circuit architecture suitable for designing a wide dynamic range current-to-time converter, and suitable for potentiostat design meeting different requirements. Therefore, this study provides an efficient way to make trade-offs among the parameters, such as dynamic range, sampling frequency, resolution, power dissipation, and chip area. A time-based potentiostat for wide dynamic range current measurement is presented. The proposed design is characterized through post-layout simulation, showing a wide dynamic input current range of 126 dB (1 nA-2 mA), and the resolution at the minimum current range is smaller than 10 pA. The sampling frequency of the circuit is 1 kHz, and the minimum power dissipation is only 12 μW.

UR - http://www.scopus.com/inward/record.url?scp=84962159054&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84962159054&partnerID=8YFLogxK

U2 - 10.1109/TENCON.2015.7372816

DO - 10.1109/TENCON.2015.7372816

M3 - Conference contribution

AN - SCOPUS:84962159054

VL - 2016-January

BT - TENCON 2015 - 2015 IEEE Region 10 Conference

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 35th IEEE Region 10 Conference, TENCON 2015

Y2 - 1 November 2015 through 4 November 2015

ER -

A time-based potentiostat for wide dynamic range current measurement

摘要

Other

All Science Journal Classification (ASJC) codes

存取文件

其它文件與鏈接

指紋

引用此