Acoustic energy harvesting using sonic crystals

Liang Yu Wu, Lien-Wen Chen, I-Ling Chang, Chun Chih Wang

研究成果: Chapter

1 引文 (Scopus)

摘要

This chapter presents the development of an acoustic energy harvester using the sonic crystal and the piezoelectric material. A point defect is created by removing a rod from a perfect sonic crystal. The point defect in the sonic crystal acts as a resonant cavity; thus, the acoustic waves at resonant frequency can be localized within the cavity of the sonic crystal. The piezoelectric material is put into the cavity to convert the ambient mechanical energy into electrical energy. The power generation from acoustic energy is based on the effect of the wave localization in the cavity and the direct piezoelectric effect of the piezoelectric material. The plane wave expansion method is employed to calculate the resonant frequency of the sonic crystal, and the finite element method is adopted to obtain the pressure and particle velocity field of the defect mode at the resonant frequency in the sonic crystal. A model for energy harvesting of the piezoelectric curved beam is also developed to predict the output voltage and power of the harvester. The larger voltage output of the piezoelectric material is associated with the larger pressure in the cavity of the sonic crystal. Two kinds of piezoelectric PVDF films (LDT4-028k and LDT2-028k) are placed inside the cavity of the sonic crystal and attached on rods. When the frequency of the incident acoustic wave is at 4.2/4.21kHz, a maximum power is generated under a load resistance 3.9/15kΩ for LDT4-028k/LDT2-028k PVDF film, respectively. Piezoelectric materials with higher electromechanical coupling should be selected to improve the output power. In addition, the piezoelectric beam can be designed to have the same resonant frequency with the cavity. By using properties of band gaps and wave localizations of the sonic crystal, the noise control and energy harvesting can be achieved simultaneously.

原文English
主出版物標題Advances in Energy Harvesting Methods
發行者Springer New York
頁面295-319
頁數25
9781461457053
ISBN(電子)9781461457053
ISBN(列印)1461457041, 9781461457046
DOIs
出版狀態Published - 2013 九月 1

指紋

Energy harvesting
Acoustics
Piezoelectric materials
Crystals
Natural frequencies
Harvesters
Point defects
Acoustic waves
Electromechanical coupling
Acoustic variables control
Piezoelectricity
Cavity resonators
Electric potential
Power generation
Energy gap
Finite element method
Defects

All Science Journal Classification (ASJC) codes

  • Energy(all)

引用此文

Wu, L. Y., Chen, L-W., Chang, I-L., & Wang, C. C. (2013). Acoustic energy harvesting using sonic crystals. 於 Advances in Energy Harvesting Methods (卷 9781461457053, 頁 295-319). Springer New York. https://doi.org/10.1007/978-1-4614-5705-3_12
Wu, Liang Yu ; Chen, Lien-Wen ; Chang, I-Ling ; Wang, Chun Chih. / Acoustic energy harvesting using sonic crystals. Advances in Energy Harvesting Methods. 卷 9781461457053 Springer New York, 2013. 頁 295-319
@inbook{7e2c5c57961444e196330c97c8fd2dba,
title = "Acoustic energy harvesting using sonic crystals",
abstract = "This chapter presents the development of an acoustic energy harvester using the sonic crystal and the piezoelectric material. A point defect is created by removing a rod from a perfect sonic crystal. The point defect in the sonic crystal acts as a resonant cavity; thus, the acoustic waves at resonant frequency can be localized within the cavity of the sonic crystal. The piezoelectric material is put into the cavity to convert the ambient mechanical energy into electrical energy. The power generation from acoustic energy is based on the effect of the wave localization in the cavity and the direct piezoelectric effect of the piezoelectric material. The plane wave expansion method is employed to calculate the resonant frequency of the sonic crystal, and the finite element method is adopted to obtain the pressure and particle velocity field of the defect mode at the resonant frequency in the sonic crystal. A model for energy harvesting of the piezoelectric curved beam is also developed to predict the output voltage and power of the harvester. The larger voltage output of the piezoelectric material is associated with the larger pressure in the cavity of the sonic crystal. Two kinds of piezoelectric PVDF films (LDT4-028k and LDT2-028k) are placed inside the cavity of the sonic crystal and attached on rods. When the frequency of the incident acoustic wave is at 4.2/4.21kHz, a maximum power is generated under a load resistance 3.9/15kΩ for LDT4-028k/LDT2-028k PVDF film, respectively. Piezoelectric materials with higher electromechanical coupling should be selected to improve the output power. In addition, the piezoelectric beam can be designed to have the same resonant frequency with the cavity. By using properties of band gaps and wave localizations of the sonic crystal, the noise control and energy harvesting can be achieved simultaneously.",
author = "Wu, {Liang Yu} and Lien-Wen Chen and I-Ling Chang and Wang, {Chun Chih}",
year = "2013",
month = "9",
day = "1",
doi = "10.1007/978-1-4614-5705-3_12",
language = "English",
isbn = "1461457041",
volume = "9781461457053",
pages = "295--319",
booktitle = "Advances in Energy Harvesting Methods",
publisher = "Springer New York",
address = "United States",

}

Wu, LY, Chen, L-W, Chang, I-L & Wang, CC 2013, Acoustic energy harvesting using sonic crystals. 於 Advances in Energy Harvesting Methods. 卷 9781461457053, Springer New York, 頁 295-319. https://doi.org/10.1007/978-1-4614-5705-3_12

Acoustic energy harvesting using sonic crystals. / Wu, Liang Yu; Chen, Lien-Wen; Chang, I-Ling; Wang, Chun Chih.

Advances in Energy Harvesting Methods. 卷 9781461457053 Springer New York, 2013. p. 295-319.

研究成果: Chapter

TY - CHAP

T1 - Acoustic energy harvesting using sonic crystals

AU - Wu, Liang Yu

AU - Chen, Lien-Wen

AU - Chang, I-Ling

AU - Wang, Chun Chih

PY - 2013/9/1

Y1 - 2013/9/1

N2 - This chapter presents the development of an acoustic energy harvester using the sonic crystal and the piezoelectric material. A point defect is created by removing a rod from a perfect sonic crystal. The point defect in the sonic crystal acts as a resonant cavity; thus, the acoustic waves at resonant frequency can be localized within the cavity of the sonic crystal. The piezoelectric material is put into the cavity to convert the ambient mechanical energy into electrical energy. The power generation from acoustic energy is based on the effect of the wave localization in the cavity and the direct piezoelectric effect of the piezoelectric material. The plane wave expansion method is employed to calculate the resonant frequency of the sonic crystal, and the finite element method is adopted to obtain the pressure and particle velocity field of the defect mode at the resonant frequency in the sonic crystal. A model for energy harvesting of the piezoelectric curved beam is also developed to predict the output voltage and power of the harvester. The larger voltage output of the piezoelectric material is associated with the larger pressure in the cavity of the sonic crystal. Two kinds of piezoelectric PVDF films (LDT4-028k and LDT2-028k) are placed inside the cavity of the sonic crystal and attached on rods. When the frequency of the incident acoustic wave is at 4.2/4.21kHz, a maximum power is generated under a load resistance 3.9/15kΩ for LDT4-028k/LDT2-028k PVDF film, respectively. Piezoelectric materials with higher electromechanical coupling should be selected to improve the output power. In addition, the piezoelectric beam can be designed to have the same resonant frequency with the cavity. By using properties of band gaps and wave localizations of the sonic crystal, the noise control and energy harvesting can be achieved simultaneously.

AB - This chapter presents the development of an acoustic energy harvester using the sonic crystal and the piezoelectric material. A point defect is created by removing a rod from a perfect sonic crystal. The point defect in the sonic crystal acts as a resonant cavity; thus, the acoustic waves at resonant frequency can be localized within the cavity of the sonic crystal. The piezoelectric material is put into the cavity to convert the ambient mechanical energy into electrical energy. The power generation from acoustic energy is based on the effect of the wave localization in the cavity and the direct piezoelectric effect of the piezoelectric material. The plane wave expansion method is employed to calculate the resonant frequency of the sonic crystal, and the finite element method is adopted to obtain the pressure and particle velocity field of the defect mode at the resonant frequency in the sonic crystal. A model for energy harvesting of the piezoelectric curved beam is also developed to predict the output voltage and power of the harvester. The larger voltage output of the piezoelectric material is associated with the larger pressure in the cavity of the sonic crystal. Two kinds of piezoelectric PVDF films (LDT4-028k and LDT2-028k) are placed inside the cavity of the sonic crystal and attached on rods. When the frequency of the incident acoustic wave is at 4.2/4.21kHz, a maximum power is generated under a load resistance 3.9/15kΩ for LDT4-028k/LDT2-028k PVDF film, respectively. Piezoelectric materials with higher electromechanical coupling should be selected to improve the output power. In addition, the piezoelectric beam can be designed to have the same resonant frequency with the cavity. By using properties of band gaps and wave localizations of the sonic crystal, the noise control and energy harvesting can be achieved simultaneously.

UR - http://www.scopus.com/inward/record.url?scp=84949175628&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84949175628&partnerID=8YFLogxK

U2 - 10.1007/978-1-4614-5705-3_12

DO - 10.1007/978-1-4614-5705-3_12

M3 - Chapter

AN - SCOPUS:84949175628

SN - 1461457041

SN - 9781461457046

VL - 9781461457053

SP - 295

EP - 319

BT - Advances in Energy Harvesting Methods

PB - Springer New York

ER -

Wu LY, Chen L-W, Chang I-L, Wang CC. Acoustic energy harvesting using sonic crystals. 於 Advances in Energy Harvesting Methods. 卷 9781461457053. Springer New York. 2013. p. 295-319 https://doi.org/10.1007/978-1-4614-5705-3_12