TY - JOUR
T1 - Actuator driving force analysis and modelling of TRR-XY PKM
AU - Chang, T. H.
AU - Chen, S. L.
AU - Chang, Y. C.
AU - Inasaki, I.
PY - 2002
Y1 - 2002
N2 - The main aim of this work is to investigate the actuator driving force variations of a parallel kinematic machine (PKM) for different cutting paths. To meet this aim, a TRR-XY five-degrees-of-freedom (5DOF) PKM was selected and built for this research, and a dynamic analysis model of the PKM was developed. Here, 'T' stands for translational DOF and 'R' stands for rotational DOF of the platform. In this research, the dynamic analysis and modelling for the TRR-XY PKM are derived on the basis of the Denavit-Hartenberg (D-H) notation method. The parametric tool concept and Lagrange equation theory are also included in the derivation. The actuator driving force variations for different cutting paths are obtained using the developed dynamic modelling. Five cutting paths are selected to represent the possible cutting paths inside the workspace. The obtained actuator driving force variations on A, B, C chains are useful for obtaining a good dynamic performance PKM machining application. The main results show that the required actuator driving forces are mainly affected by the inclination angle, φ, of the tool platform. The angular acceleration of the tool platform has only very little effect. For obtaining a better PKM machining application, a working space with smaller φ is recommended.
AB - The main aim of this work is to investigate the actuator driving force variations of a parallel kinematic machine (PKM) for different cutting paths. To meet this aim, a TRR-XY five-degrees-of-freedom (5DOF) PKM was selected and built for this research, and a dynamic analysis model of the PKM was developed. Here, 'T' stands for translational DOF and 'R' stands for rotational DOF of the platform. In this research, the dynamic analysis and modelling for the TRR-XY PKM are derived on the basis of the Denavit-Hartenberg (D-H) notation method. The parametric tool concept and Lagrange equation theory are also included in the derivation. The actuator driving force variations for different cutting paths are obtained using the developed dynamic modelling. Five cutting paths are selected to represent the possible cutting paths inside the workspace. The obtained actuator driving force variations on A, B, C chains are useful for obtaining a good dynamic performance PKM machining application. The main results show that the required actuator driving forces are mainly affected by the inclination angle, φ, of the tool platform. The angular acceleration of the tool platform has only very little effect. For obtaining a better PKM machining application, a working space with smaller φ is recommended.
UR - http://www.scopus.com/inward/record.url?scp=0347998333&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0347998333&partnerID=8YFLogxK
U2 - 10.1243/14644190260138885
DO - 10.1243/14644190260138885
M3 - Article
AN - SCOPUS:0347998333
SN - 1464-4193
VL - 216
SP - 87
EP - 101
JO - Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics
JF - Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics
IS - 1
ER -