Air side performance of convex-louver fin heat exchangers

P. Y. Chen, C. C. Wang, Jiin-Yuh Jang, W. R. Chang

研究成果: Conference article同行評審


Experiments were carried out to study the heat transfer and pressure drop characteristics of convex louver fin tube heat exchangers. Totally, seven samples of heat exchangers, including five convex-louver, one wavy configuration and one plate fin configuration were tested in the present investigation. The effects of row number and fin pitch of the convex-louver were also investigated. Results are presented as plots of friction factor, f, and Colburn j factor against Reynolds number based on tube collar diameter in the range of 400 to 8000. The presenting data were also compared to the wavy and plain fin geometry. It is found that the fin pitch has negligible effect on the Colburn j factor, and the row effect is negligible with increasing Reynolds number.

頁(從 - 到)103-108
期刊American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
出版狀態Published - 1995 12月 1
事件Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition - San Francisco, CA, USA
持續時間: 1995 11月 121995 11月 17

All Science Journal Classification (ASJC) codes

  • 機械工業
  • 流體流動和轉移過程


深入研究「Air side performance of convex-louver fin heat exchangers」主題。共同形成了獨特的指紋。