An alternative implementation for fabricating a Schiffman phase shifter

Chien-Hsing Lee, Yu Han Chang

研究成果: Article同行評審

6 引文 斯高帕斯(Scopus)

摘要

This article presents an alternative implementation for fabricating a Schiffman phase shifter. The method consists of initially deciding the gap width between the coupled microstrip lines and using the derived equation to determine the width of the coupled microstrip lines. The proposed approach does not have to remove the ground plane underneath the coupled microstrip lines and install an additional isolated rectangular conductor under them. One Schiffman phase shifter is designed and fabricated on a double-sided FR4 printed circuit board as an example to verify the performance of the proposed approach, and the design is simulated using Ansoft HFSS and validated by the measurements. The simulated and measured return losses are found to be better than -15 dB over the frequency band from 1.0 to 4.0 GHz and the insertion loss is within -2 dB. The bandwidth in 90° phase difference from 1.6 to 3.4 GHz is about 72%. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 55:9-12, 2013; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.27266

原文English
頁(從 - 到)9-12
頁數4
期刊Microwave and Optical Technology Letters
55
發行號1
DOIs
出版狀態Published - 2013 一月 1

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

指紋 深入研究「An alternative implementation for fabricating a Schiffman phase shifter」主題。共同形成了獨特的指紋。

引用此