Analysis and experimental study of permanent magnet machines with in-situ magnetization

Min-Fu Hsieh, You Chiuan Hsu, Po Ting Chen

研究成果: Article同行評審

6 引文 斯高帕斯(Scopus)

摘要

This paper evaluates the performance of surface-mounted permanent-magnet (PM) machines with anisotropic rare-earth magnets magnetized using its own stator windings. The magnets in this process (often called in-situ magnetization) are magnetized after complete assembly. For manufacture of PM machines using this process, part of the magnet may suffer from weaker magnetization due to the magnetizing flux pattern, in particular on the two sides of the anisotropic magnets. The machine performance can thus be affected and needs to be evaluated. The current required to sufficiently magnetize the machine should be carefully studied. In this paper, both finite element analysis and experiments on prototype PM machines manufactured with in-situ magnetization are used. The concentrated and distributed winding machines are both considered. The results show that distributed winding machines can magnetize the rotors more easily than concentrated winding ones. Also, it is found that a magnetizing field of 2.5 times coercivity allows the machine back EMF magnitude to achieve the levels of pre-magnetized cases.

原文English
文章編號6514534
頁(從 - 到)2351-2354
頁數4
期刊IEEE Transactions on Magnetics
49
發行號5
DOIs
出版狀態Published - 2013

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

指紋 深入研究「Analysis and experimental study of permanent magnet machines with in-situ magnetization」主題。共同形成了獨特的指紋。

引用此